• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.852-857
• /
• 2004

A new and efficient method for estimating the statistical moments of a system performance function has been developed. The method consists of two steps: (1) An approximate response surface is generated by a quadratic regression model, and (2) the statistical moments of the regression model are then calculated by experimental design techniques proposed by Seo and $Kwak^{(4)}$. In this approach, the size of experimental region affects the accuracy of the statistical moments. Therefore, the region size should be selected suitably. The D-optimal design and the central composite design are adopted over the selected experimental region for the regression model. Finally, the Pearson system is adopted to decide the distribution type of the system performance function and to analyze structural reliability.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.10
• /
• pp.1244-1251
• /
• 1988

Edge is one of the primitive features of an image and is widely used in image classification and analysis. New edge extration methods using central moments are presented and show various characteristics according to the order of moment, definition of both random variables and probability density functions. The proposed methods use the integral of differences between local mean and pixels in the window whereas most of conventional edge operators use only differential concepts. This gives good noise immunity and extracts fine edges.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.3
• /
• pp.1-5
• /
• 1984

It is investigated that Mahalanobis distances are invariant under a proper transformation and interest MDs are distributed as non-central chi-square while it is well known that intraset MDs are distributed as central chi-square. And their moments have been expressed as simple polynomials whose coefficients satisfy straightforward recursive relations.

• Journal of the Korean Chemical Society
• /
• v.23 no.4
• /
• pp.198-205
• /
• 1979

A valence bond method of calculation of the dipole moments for octahedral $(M(III)0_3S_3)$ type complexes are developed, using $d^2sp^3 $hybrid orbitals of the central metal ions and the single basis set orbital of ligands. (M (III) =V (III), Cr (III), Mn (III), Fe (III), Co (III), Ru (III), Rh (III) and OS (III)). In this method the mixing coefficient of the valence basis sets for the central metal ion with the appropriate ligand orbitals is not required to be the same, differently from the molecular orbital method. The valence bond method is much more easier to calculate the dipole moments for octahedral complexes than the approximate molecular orbital method and the calculated results are also in the range of the experimental vaues.

• Wind and Structures
• /
• v.1 no.4
• /
• pp.287-302
• /
• 1998

This paper formulates a probabilistic model which is able to represent the maximum instantaneous wind velocity. Unlike the classical methods, where the randomness is circumscribed within the mean maximum component, this model relies also on the randomness of the maximum value of the turbulent fluctuation. The application of the FOSM method furnishes the first and second statistical moments in closed form. The comparison between the results herein obtained and those supplied by classical methods points out the central role of the turbulence intensity. Its importance is exalted when extending the analysis from the wind velocity to the wind pressure.

• Journal of applied mathematics & informatics
• /
• v.12 no.1_2
• /
• pp.323-334
• /
• 2003

We review the developmental history of the moment matrix of matrix quadratic form. This paper also investigates, the moment matrix of (non-central) Wishart distribution, which is multi-version of X$^2$ distribution.

• Journal of Korean Dental Science
• /
• v.16 no.1
• /
• pp.23-34
• /
• 2023

Purpose: This study aims to investigate the force delivery profile of thermoformed aligners (TFA) compared with direct-printed aligners (DPA) and to explore the effect of different activation amounts on forces and moments of respective groups. A secondary objective is to observe the amount of stress relaxation that occurs over the 7~14 days when aligners are maintained in a simulated intraoral environment. Materials and Methods: An in vitro setup was created to quantify forces and moments. It consisted of a three dimensional-printed base plate and segmented maxillary teeth, placed in a semi-enclosed chamber to maintain a temperature of 37℃. Ninety clear aligners were divided into nine groups of ten aligners each based on material types (Zendura, ATMOS, TC-85) and activation amounts. Aligners were created with 0.00, 0.25- and 0.50-mm activations for lingual bodily movement of the upper left central incisor and kept on models in the "stressed" position in a 37℃ water bath. Three force components acting on the upper left lateral incisor, upper left central incisor, and upper right central incisor were measured for each time point, beginning from the initial baseline measurement, 8 hours, 16 hours, 24 hours, 2 days, 3 days, 4 days, 5 days, 6 days, 7 days, and lastly, 14 days. Result: TC-85 aligners in every activation group showed less force on teeth than Zendura and ATMOS. Significant force levels from 0.0 mm activation were present and stayed consistent over the course of 14 days. Comparisons made for baseline measurements to 7-days and 14-days showed statistically significant change from the baseline force level. Conclusion: TC-85 aligners demonstrated lower, more consistent forces with fewer side effects. Aligners can generate forces even when no activation is programmed. No major decreases in force levels over time were observed; the intra-oral clinical simulated environment and length of observation time could contribute to this.

• Macromolecular Research
• /
• v.16 no.7
• /
• pp.590-595
• /
• 2008

The pressure driven membrane process has been a breakthrough in the removal of pollutants from drinking water. These experiments examined the removal of chlorophenol compounds from water using low pressure membranes. The removal performance of the membranes was based primarily on size exclusion. Apart from size exclusion, the polarity and pKa of the compounds also influences the membrane performance. The molecular size and dipole moments of the respective molecules were calculated using a quantum chemical method. The rejection of pollutants also followed the same trend as salt rejection by the membranes.

• Steel and Composite Structures
• /
• v.20 no.1
• /
• pp.57-70
• /
• 2016

The predominant type of buckling that I-steel concrete composite beams experience in the negative moment area is distortional buckling. The key factors that affect distortional buckling are the torsional and lateral restraints by the bottom flange. This study thoroughly investigates the equivalent lateral and torsional restraint stiffnesses of the bottom flange of an I-steel concrete composite beam under negative moments. The results show a coupling effect between the applied forces and the lateral and torsional restraint stiffnesses of the bottom flange. A formula is proposed to calculate the critical buckling stress of the I-steel concrete composite beams under negative moments by considering the lateral and torsional restraint stiffnesses of the bottom flange. The proposed method is shown to better predict the critical bending moment of the I-steel composite beams. This article introduces an improved method to calculate the elastic foundation beams, which takes into account the lateral and torsional restraint stiffnesses of the bottom flange and considers the coupling effect between them. The results show a close match in results from the calculation method proposed in this paper and the ANSYS finite element method, which validates the proposed calculation method. The proposed calculation method provides a theoretical basis for further research on distortional buckling and the ultimate resistance of I-steel concrete composite beams under a variable axial force.

• Journal of Preventive Medicine and Public Health
• /
• v.53 no.4
• /
• pp.236-244
• /
• 2020

Objectives: Although the World Health Organization (WHO) initiative "My 5 Moments for Hand Hygiene" has been lauded as effective in preventing hospital-associated infections, little is known about healthcare workers (HCWs)' hand hygiene behavior. In this study, we sought to assess knowledge and attitudes towards the concepts in this initiative, as well as associated factors, among Vietnamese HCWs at a general hospital. Methods: A structured questionnaire was administered to HCWs at a central Vietnamese general hospital in 2015. Multiple logistic regression analysis was used to identify factors associated with HCWs' knowledge and attitudes towards hand hygiene. Results: Of 120 respondents, 65.8% and 67.5% demonstrated appropriate knowledge and a positive attitude, respectively, regarding all 5 hand hygiene moments. Logistic regression indicated better knowledge of hand hygiene in workers who were over 30 years old, who were direct HCWs (rather than managers), who had frequent access to clinical information, and who received their clinical information from training. Those who worked in infectious and tropical disease wards, who had frequent access to clinical information, and who received information from training were more likely to have a positive attitude towards hand hygiene than their counterparts. Conclusions: Although many Vietnamese HCWs displayed moderate knowledge and positive attitudes towards the WHO hand hygiene guidelines, a key gap remained. Regular education and training programs are needed to increase knowledge and to improve attitudes and practices towards hand hygiene. Furthermore, a combination of multimodal strategies and locally-adapted interventions is needed for sustainable hand hygiene adherence.