• Tribology and Lubricants
• /
• 제14권3호
• /
• pp.87-93
• /
• 1998

Crank pin bearing in two-stroke marine diesel engine is operated under quite severe conditions since the elements are big and heavy and the sliding speed is very slow. Therefore it is very difficult to form oil film. In this paper, two types of bearings with different groove shape are compared. One has circumferential oil groove at lower position and the other has lengthwise oil groove at upper position. Bearing clearance, oil inlet pressure and length to diameter ratio are selected as design parameters. Locus of journal center and minimum oil film thickness are investigated to compare two cases.

• 대한기계학회논문집A
• /
• 제27권2호
• /
• pp.223-230
• /
• 2003

Stress patterns are created in the plastic spur gear tooth body by introducing a hole or a steel pin to improve stress distribution. Static analysis using finite element method is carried out to show the effect. The result shows that maximum stress as well as tooth tip displacement is dependent on the size and location of a hole or a steel pin. When a hole located on the tooth center line, the maximum static stress level and the tooth tip deflection is always higher than that of a solid gear. But, a considerable reduction in the maximum stress and tooth tip displacement is achieved by insertion of steel pin.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권20호
• /
• pp.8931-8936
• /
• 2014

Background: Herbal compounds such as curcumin which decrease telomerase and gene expression have been considered as beneficial tools for lung cancer treatment. In this article, we compared the effects of pure curcumin and curcumin-loaded NIPAAm-MAA nanoparticles on telomerase and PinX1 gene expression in a lung cancer cell line. Materials and Methods: A tetrazolium-based assay was used for determination of cytotoxic effects of curcumin on the Calu-6 lung cancer cell line and telomerase and pinX1 gene expression was measured with real-time PCR. Results: MTT assay showed that Curcumin-loaded NIPAAm-MAA inhibited the growth of the Calu-6 lung cancer cell line in a time and dose-dependent manner. Our q-PCR results showed that the expression of telomerase gene was effectively reduced as the concentration of curcumin-loaded NIPAAm-MAA increased while expression of the PinX1 gene became elevated. Conclusions: The results showed that curcumin-loaded-NIPAAm-MAA exerted cytotoxic effects on the Calu-6 cell line through down-regulation of telomerase and stimulation of pinX1 gene expression. NIPPAm-MAA could be good carrier for such kinds of hydrophobic agent.

• 종양간호연구
• /
• 제12권4호
• /
• pp.323-330
• /
• 2012

Purpose: Gamma knife radiosurgery (GKR) requires frame positioning because the treatment target should be as close as possible to the center of the frame. The purpose of this study was to identify the level of pin-fixing (PFP) and removal pain (PRP), and the associated factors with the pain undergoing GKR. Methods: A total of 116 patients who underwent GKR for their brain tumor were recruited from C University hospital located in H city, J province. The level of pain was measured by the 10 cm VAS. Results: The level of PFP and PRP were 6.36 and 3.26 points, respectively. Step-wise multiple regressions found that the group who have not perceived numbness after applying 5% EMLA cream was the highest associated factor with PFP, following the time from lidocaine injection to pin-fixation, which explained 21% of total variance of the level of PFP. On the other hand, a group who did not perceive numbness after applying 10% lidocaine spray was the highest factor with PRP, among female patients, which explained 27% of total variance of the level of PRP. Conclusion: Both of PFP and PRP of the stereotactic frame were moderate so that nurses should consider diverse strategies to reduce pain among patients undergoing gamma knife radiosurgery.

• Tribology and Lubricants
• /
• 제27권5호
• /
• pp.256-263
• /
• 2011

Bearings of marine engines are operated under severe conditions because of dynamic load and low sliding speed. This paper deals with lubrication analysis of a crank pin bearing for a marine diesel engine. Journal center locus and oil film thickness are compared of crank pin bearing. In the past researches, journal bearings have been studied only about the surface of bearing. In addition to this conventional research, this paper analyzes the effect of roundness error of a journal and a bearing on the minimum film thickness. Numerical analysis has been studied by using Reynolds equation and also Half-Sommerfeld condition is applied as boundary condition. Futhermore, this study investigates the effect of roundness error change on the minimum film thickness. The results demonstrate that the bigger amplitude of roundness error yields, the lower minimum oil film thickness is. In comparison to previous research considered a journal and a bearing individually, the results considering a journal and a bearing together show that amplitude of roundness error of journal has very little effect on the minimum oil film thickness.

• 한국전자파학회논문지
• /
• 제21권7호
• /
• pp.769-777
• /
• 2010

본 논문에서는 모서리 접지면 슬롯과 PIN 다이오드를 이용하여 2.4 GHz에서 활용 가능한 편파 변환 특성의 마이크로스트립 패치 안테나를 제안하였다. 제안된 안테나는 정사각형 구조의 마이크로스트립 패치와 접지면에 위치한 두 쌍의 슬롯과 PIN 다이오드로 이루어져 있다. 제안된 안테나에서는 PIN 다이오드의 스위칭 특성을 이용하여 접지면 슬롯의 전기적 길이를 조정하였고, 이를 통해 선형 편파와 좌회전 편파, 우회전 편파 간의 변환 을 구현하였다. 또한 DC 바이어스 회로로 인한 접지면의 분리를 통해서 안테나는 크기 감소 효과를 얻었다. 안테나의 설계 주파수는 2.4 GHz이며, 선형 편파로 동작할 때에는 15 dB의 반사 손실과 59 MHz의 임피던스 대역폭을 가지고, 좌회전 원형 편파와 우회전 원형 편파시 각각 1.17 dB, 1.67 dB의 최소 축비 특성과 28 MHz, 32 MHz의 3-dB 축비 대역폭을 가진다.

• 마이크로전자및패키징학회지
• /
• 제28권2호
• /
• pp.39-44
• /
• 2021

본 논문에서는 밀리미터파 대역에서 헤어핀 타입과 인터디지털 타입 두 종류의 대역통과필터(BPF)를 LCP(Liquid Crystal Polymer)와 PTFE(Polytetrafluoroethylene) 두 종류의 기판을 이용하여 설계 하고 성능을 비교하였다. 제안된 BPF의 통과 대역은 26.5 GHz~27.3 GHz 대역이며, 필터의 차수는 3차로 선택하였다. 제안된 BPF의 성능 비교는 기판 종류와 타입에 따른 대역폭(Bandwidth)과 통과 대역 내 삽입손실(Insertion Loss)과 평탄도(in-band Flatness) 등을 비교하였다. S21이 -3 dB가 되는 대역폭을 비교하였을 때 제안된 4 개의 BPF 중 PTFE 기판에 설계된 인터디지털 타입이 7.8 GHz로 가장 넓게 설계되었으며, LCP 기판에 설계된 헤어핀 타입 BPF가 4.2 GHz로 가장 협소한 대역폭을 가지는 것으로 나타났다. 통과 대역 내 삽입손실은 PTFE 기판에 설계된 헤어핀 타입 BPF가 -0.667 dB 이상으로 가장 우수하고 LCP 기판에 설계된 헤어핀 타입 BPF가 -0.937 dB 이상으로 가장 낮았으나, 0.27 dB의 근소한 차이임을 확인했다. 통과 대역 내 평탄도의 경우 PTFE 기판에 설계된 인터디지털 타입 BPF가 0.017 dB로 가장 우수하였고, LCP 기판에 제작된 헤어핀 타입이 0.07 dB로 가장 낮았으나 0.053 dB의 근소한 차이였다. 따라서, 밀리미터파 대역에서 LCP 기판을 이용한 대역통과 필터는 PTFE 기판을 이용한 대역통과필터와 비슷한 성능을 도출할 수 있을 것으로 사료된다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 II
• /
• pp.859-862
• /
• 2003

This paper proposes an emulation environment for SoC designs using small number of large gate-count FPGA's and a PC system. To overcome the pin limitation problem in partitioning the design when the design size overwhelms the FPGA gate count, we use bus splitter modules that replicate on-chip bus signals in one FPGA to arbitrary number of other FPGA's with minimal pin count. The proposed scheme is applied to the emulation of 2 million gate multimedia processing chip using two Xilinx Viretex-2 6000 FPGA devices in 6.6MHz operating frequency. An ARM core, memories, camera and LCD display are modeled in software using dual 2GHz Pentium-III processors. This scheme can be utilized for more than 2 FPGA's in the same ways as two FPGA case without losing emulation speed.

• BMB Reports
• /
• 제55권7호
• /
• pp.360-360
• /
• 2022

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2007년도 The 1st International Symposium on Advanced Magnetic Materials
• /
• pp.119.2-119.2
• /
• 2007