• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.12 no.3
• /
• pp.8-16
• /
• 2003

Monitoring of the drill wear :md hole quality change is conducted during the drilling process. Cutting force measured by tool dynamometer is a evident feature estimating abnormal state of drilling. One major difficulty in using tool dynamometer is that the work-piece must be mounted on the dynamometer, and thus the machining process is disturbed and discontinuous. Acoustic transducer do not disturb the normal machining process and provide a relatively easy way to monitor a machining process for industrial application. for this advantage, AE signal is used to estimate the abnormal fate. In this study vision system is used to detect flank wear tendency and hole quality, there are many formal factors in hole quality decision circularity, cylindricity, straightness, and so of but these are difficult to measure in on-line monitoring. The movement of hole center and increasement of hole diameter is presented to determine hole quality. As the results of this experiment AE RMS signal and measurements by vision system are shorn the similar tendency as abnormal state of drilling.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.12
• /
• pp.2315-2327
• /
• 1992

A robot assembly method which uses configuration and force/torque information of tactile sensor system and performs chamferless peg-in-hole tasks is suggested and experimentally studied. When the robot gripes the peg with random orientation, the realignment of the peg to the hole center line is successfully performed with the gripping configuration information of the tactile sensor and the inverse kinematics of the robot. The force/torque information of the tactile sensor makes it possible to control the contacting force between mating parts during hole search stage. The suggested algorithm employs a hybrid position/force control and the experiments show that the algorithm accomplishes well peg-in-hole tasks with permissible small contacting force. The chamferless peg-in-hole tasks with smaller clearance than the robot repeatibility can be excuted without any loss or deformation of mating parts. This study the possibility of precise and chamferless parts mating by robot and tactile sensor system.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.2
• /
• pp.91-95
• /
• 2017

We were designed the hole transport layer of the new composite skeleton structure having a high charge mobility and thermal stability. In this paper, a hole transport layer material based on thiophene molecular structure capable of hole mobility characteristics and high triplet energy was designed and synthesized. The structures and properties of the synthesized compounds were characterized by NMR, fluorescence spectroscopy and energy band gap. As a result of NMR measurement, it was confirmed that when analyzing the integrated type with the position where the measured peak is displayed, it agrees with the structure of hole transport materials. The emission characteristics of the hole transport layer material showed absorption characteristics at 412 nm and 426 nm, respectively, and exhibited emission characteristics in the range of 469 nm and 516 nm.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.405-406
• /
• 2002

The main subject of this paper is analyzing the patterns of maximum oil film pressure and the minimum oil film thickness under various pre-conditions of geometric shape as functions of bearing groove and proceeding oil hole in the connecting rod bearing. As the major analytical tool, elastohydrodynamic lubrication analysis has been applied and two-intertwined results of maximum oil film pressure and minimum oil film thickness have been compared and analyzed using EXCITE program. From computed results, the optimal lubrication conditions as geometric shape of bearing groove and the proceeding oil hole have been investigated. This may be useful for the bearing designer as a firm reference.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.7 no.2
• /
• pp.25-30
• /
• 2001

Corrugated board is composed of cellulose fibers which are arranged with the same direction as the board manufactured. The direction is classified with machine direction (MD) and cross-machine direction (CD). Therefore, corrugated board is orthotropic material that has totally different strength properties at each direction and especially, at machine direction, the mechanical properties of fiberboard is superior. The compression strength of the corrugated fiberboard boxes is very important information to the manufacturers and the end users. This study was carried out to design the optimum pattern, size, and location of ventilating hole for ventilating container through the finite element analysis. The optimum pattern and location of ventilating and hand hole were vertical oblong, a short distance to the right and left from the center of panel, and center or a short distance to the top of both sides, respectively. We identified the effect on both stress dispersion and stress level from the analysis of redisigned hand hole.

• Journal of information and communication convergence engineering
• /
• v.8 no.3
• /
• pp.263-266
• /
• 2010

In this paper, a novel defected ground structure (DGS) pattern with enhanced effective capacitance (varactor diode) and a hole in PCB center is presented. The increase in effective capacitance enables the new DGS pattern to achieve a lower resonance than the DGS pattern for the same etched square dimension. The hole in the center also can make resonator frequency lower with better characteristic. According to the tunable characteristic of varactor diode, the resonant frequencies can be tunable. Simulation results show that a lower resonance is achieved with active device, compared to a common DGS pattern.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.10
• /
• pp.50-55
• /
• 2021

In this study, to create circular holes on an inclined conic face, we developed a novel process of vertical piercing on the plane before drawing, instead of applying an expensive cam-piercing method. The pierced holes are deformed during the drawing, and their shapes are affected by the size of the center hole. Using the Abaqus CAE program, the deformation tendency of the holes, according to the diameter of the center hole, was identified, and the diameter for securing the roundness of the side holes were determined through actual experiments. The developed process was successfully applied to mass production of the part, and a cost reduction is expected.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1650-1653
• /
• 2007

We demonstrate fluorescent green organic lightemitting diodes employing a rhenium oxide ($ReO_3$)-doped N,N-diphenyl-N,N'-bis(1,1'-biphenyl)-4,4'-diamine (NPB) hole transporting layer (HTL). The devices exhibit significantly reduced driving voltages as well as prolonged lifetime. Details of $ReO_3$ doping effects are described in terms of charge transfer complex and stabilization of HTL morphology.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.8
• /
• pp.704-708
• /
• 2005

In this paper, a simple idea is proposed to change the compliance center of the Remote Center Compliance (RCC) by adjusting the elasticity of the Elastomer Shear Pad (ESP). To vary the elasticity of the ESP, a hole is made in the ESP along its stiffness axis, and a stiffness adjusting rod (SAR) is inserted into the hole. By adjusting the insertion depth of the rod, lateral stiffness of the ESP can be varied, and the compliance center of the VRCC can be controlled accordingly. To verify the effectiveness of the proposed idea, a prototype VRCC is designed and, the position of the compliance center with various lengths of the inserted rod are measured.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.237-237
• /
• 2012

토파즈는 Al2SiO4 ((F,OH)2) 화학성분을 이루고 있는 광물로써 주로 Fe, Cr, V 등과 같은 불순물을 포함하고 있다. 토파즈는 colorless, blue, pink, yellow 등 다양한 컬러로 산출된다. 결정 내 Si4+ 가 있어야 할 자리에 Al3+ 가 치환되면 Al3+ 를 둘러싸고 있는 4개의 산소 중 하나의 최외각 전자가 전자가를 맞추기 위해 주변에 있던 수소와 결합하여 hole center를 형성한다. 이때 토파즈는 옅은 황색의 컬러를 발색하게 된다. 그 외 청색과 핑크색 등의 컬러는 Al3+ 자리에 치환된 Fe, Cr 등과 같은 불순물에 의해 발색을 일으킨다. 또한 토파즈는 인위적으로 감마선, 전자 빔, 양성자 빔, 중성자 빔을 통해서도 hole center를 형성시켜 컬러를 발색시킬 수 있다고 잘 알려져 있다. 본 연구에서는 총 8개의 무색 토파즈를 이용하여 다양한 조건(energy 및 dose)의 전자 빔 조사를 통해 각 조건 별 컬러변화 및 분광학적 특성변화를 관찰하였다. 모든 시료는 WD-XRF를 통해 정성분석을 하였고, 전자스핀공명(ESR)기기를 통해 전자 빔 조사 전과 후 전자의 스핀 특성 변화를 관찰하였다. 자외선-가시광선 분광분석결과 모든 시료는 전자빔 조사 후 황색과 관련이 있는 450 nm 부근의 파장 영역에서 흡수 peak가 증가하는 것을 확인할 수 있었다. 또한 전자 빔 조사 후 전자스핀공명 분석 결과에서도 Fe3+ 와 관련이 있는 g=3.5~4 영역은 감소하는 반면에 hole center와 관련이 있는 g=2.012 영역이 증가하는 향상을 보였다. 본 연구결과를 통해 우리는 전자 빔 조사 조건에 따라 토파즈의 결정 내부에 미치는 영향 및 컬러 변화와의 상관관계에 대해 확인할 수 있었다.