• 한국가구학회지
• /
• 제14권2호
• /
• pp.31-38
• /
• 2003

This study was carried out to investigate characteristics of wood-based panels and wood-cement board for the possible uses as flooring and wall materials. The optimum cement/wood ratio(C/W ratio) of wood~cement board manufactured by clamp-pressing was from 2.7 to 3.2. The dimesional stability was superior in the C/W ratio of 3.2. Particularly, the dimensional stability of cement board using fine particle for particleboard face layer was favorable through three levels of C/W ratio. According to types of wooden material, bending strength of cement board using coarse particle for particleboard core layer or old newspaper(ONP) fiber was relatively higher than others. Thermal conductivities of wood-cement boards were no lower than that of gypsum board, and higher than those of plywood and boards. In case of wood-cement board of the C/W ratio of 2.7, the fire-proof performances of cement composite boards were greater than that of gypsum board, and weight loss reached to about a half of gypsum board. Then, wood-cement boards showed superior fire-proof performance compared to wood-based panels.

• Journal of the Korean Wood Science and Technology
• /
• 제15권1호
• /
• pp.12-21
• /
• 1987

본질(本質) Cement board제조(製造)를 위하여 지금까지 톱밥, 목편(木片) 및 목수(木手)(excelsior)가 사용되어 왔으나, Wafer를 사용한 제품(製品)은 아직 개발(開發)되지 않고 있는 실정이다. 따라서, 본(本) 연구(硏究)는 Cement wafer board를 압력별(壓力別), Wafer 길이별(別), Cement와 목재(木材)의 배합비별(配合比別), Wafer 배열별(排列別)로 제조(製造)하여 그 영향인자(影響因子)를 조사(調査)하고 이에 따른 제품(製品)의 물리적(物理的), 기계적(機械的) 성질(性質)을 구명(究明)하고자 실시(實施)하였으며 다음과 같은 결론(結論)을 얻었다. 1. Cement Wafer board 제품(製品)의 적정압력(壓力)은 30kg/$cm^2$이었고, 30kg/$cm^2$ 이상(以上)의 압에서는 board의 기계적 성질에 나쁜 영향을 미쳤다. 2. Cement와 목재(木材)의 배합비(配合比)가 2.1을 넘을 경우에는 board의 성질에 나쁜 영향을 끼쳤다. 3. 한쪽 방향(方向)으로 Cement-Wafer가 배열된 조건에서 제조된 CWB가 최고의 곡강도(曲强度)를 나타내었다. 4. CWB의 곡강도(曲强度)는 다른 목질(木質) Cement board보다 높은 값을 나타내었으나 박리강도(剝離强度)에 있어서는 목편 Cement board보다 약간 낮은 값을 나타내었다. 5. CWB의 난연성(難燃性) 시험(試驗)은 난연3급(難燃3級)을 만족시켰다.

• Journal of the Korean Wood Science and Technology
• /
• 제21권3호
• /
• pp.74-81
• /
• 1993

This experiment was carried out to investigate the reaction of hydration of paper sludge during the setting of portland cement in a paper sludge, wood-cement-water mixturte. The percentage of paper sludge per cement is 7.5%, 15%, 30% respectively. The result indicated that the sludge of 7.5% had the most effect on reaction of hydration, and the sludge of 15% had moderately inhibitory effect but there is still possibility to make sludge-cement board. Paper sludge of 30%, Pinus koraiensis Sieb. et Zucc and Populus euramericana Guinier were proved to have the worst inhibitory effect on cement hydration, so pretreatment will be needed before making board with paper sludge-cement mixture.

• Journal of the Korean Wood Science and Technology
• /
• 제32권6호
• /
• pp.50-56
• /
• 2004

This study was conducted to investigate the performance of sound absorption type-noise barriers manufactured with a combination of wood particles used for particleboard, recycled waste newspaper, and cement. An average density of wood-combined cement board was in the range from 0.83 to 0.96 g/cm³, showing relatively low-density board. Regardless of types of cement bonded board or wooden board, the board with concave holes(凹)-formed surfaces showed greater sound absorption coefficient compared to those of flat surface boards. The board density was not related with those coefficients. Accordingly, it was concluded that concave or deep corrugated surface structure has played an important role in sound absorption for the application of sound absorption type-noise barrier.

• 한국가구학회지
• /
• 제11권2호
• /
• pp.67-72
• /
• 2000

Some physical characteristics as thickness swelling, heat conduction, and bending properties of composite hoards made of waste wood chip and charcoal were measured. Wood-charcoal composite boards of three types and cement board were prepared for this study as shown in Table 1, Keeping duration of strawberries in the boxes($25cm{\times}25cm{\times}25cm$) manufactured with the boards was also examined. Thickness swelling and bending properties(MOR and MOE) of board B and C were lower than those of board A. Among the wood-charcoal composite boards except cement board, there were no differences in heat conduction(mm/sec.). Strawberries in the box with board C were kept longer duration in fresh condition than that with cement board. From the results, it is suggested that wood-charcoal composite boards can be used for eco-material.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2008년도 정기학술발표대회 논문집
• /
• pp.914-917
• /
• 2008

본 연구에서는 공동주택 바닥 나무 마루판 공사의 하자 사례를 조사하고 이중 가장 많은 발생빈도를 보이는 들뜸 현상에 대하여 원인분석 및 방지 방안을 검토하고자 하였다. 사례조사 결과 목질마루판 공사에서 하자요인으로써는 마루판 들뜸, 찍힘, 틈새, 갈라짐 등이 나타났고, 극중 마루판 들뜸 현상이 전체 하자비율의 72 %정도로서 가장 큰 문제점으로 나타났다. 마루판 들뜸현상이 발생하는 가장 큰 원인으로써 는 바닥 모르터의 건조수축과 목질마루판의 팽창을 특수 있는데, 모르터의 건조수축의 경우 바닥 모르터를 충분히 건조시키지 않은 상태에서 목질마루판을 시공함으로써 발생하게 되고, 목질 마루판의 팽창의 경우 목재 하지 및 주위 환경의 수분에 영향을 받아 발생하게 된다. 따라서, 목질마루판을 시공하기 전에 바닥 모르터의 양생시간을 충분히 고려하여 (약 4주간) 마루판 시공을 실시하고, 목질 마루판의 함수율이 목재 하지의 함수율로부터 4 %이상 벗어나지 않게 하며 목질마루판의 함수율을 5 % 이내로 관리하게 되면, 목질마루판의 가장 큰 문제점인 마루판 들뜸 현상은 방지할 수 있을 것으로 판단된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.919-924
• /
• 2001

The purpose of this study is to prepare the basic data for the development of building board with expanded perlite. Each paste was mixed with four levels of water cement ratio(30, 40, 50, 60%), and expanded perlite was substituted with four levels of substitutive ratio(20, 40, 60, 80%) for the each paste. The physical property, compressive strength, bending strength and thermal conductivity of each cement composite which is made through previously described method were analyzed and the result was as follow. In the case of 80 percent substitutive ratio, the cement composite had a mechanical defect which was resulted from lack of paste content. In the case of 40 and 60percent substitutive ratio, the cement composite had sufficient strength, light weight and low thermal conductivity for application to fire resisting board.

• Journal of the Korean Wood Science and Technology
• /
• 제13권3호
• /
• pp.49-53
• /
• 1985

The effects of pre-treatments, the hot water extraction of wood meal and the addition of chemical ($CaCl_2$) to wood-cement water system on the properties of wood-cement composite such as modulus of rupture (MOR), modulus of elasticity (MOE), water sorption ratio and swelling ratio of resulting boards were studied in this experiment. The wood meals through 0.83mm(20 mesh) and retained on 0.42mm(35 mesh) screen were prepared from Pinus densiflora S. at Z. and Larix leptolepsis G. For hot water extraction, 500 grams of wood meal for each species were heated to boiling with 1,500ml of distilled water in 2-liter beaker for 6 hours. Every 2 hours, the wood meals were washed with boiling distil1ed water and reheated to boiling again. After 6 hours boiling, the boiled wood particles were collected by pouring this particles on 200 mesh screen. The collected particles then washed twice with hot distilled water and dried for 24 hours in an oven at $109{\pm}20^{\circ}C$. A mixture of 663.4 grams of cement with 331.7 grams of wood meal based on oven-dry weight were dry-mixed in a plastic vessel. The mixture was kneaded with 497.6ml of distilled water in the ratio of 1.5ml of water to a gram of wood meal. To add calcium chloride to the mixture as an accelerator, $CaCl_2$ 4% solution by weight per volume, was added to pine-or larch-cement board in the ratio of 3% to cement weight. To set wood-cement board, this mixture was clamped at 30cm ${\times}$ 30cm, in thickness of 1.5cm for 3 days at room temperature, declamped and then placed at open condition for 17 days. The target density was 1.0. The four specimens sized to 5cm in width and 28cm in length were used for MOR and MOE test for each treatment. After MOR test, the tested specimens were cut to the size of 5cm ${\times}$ 5cm for water sorption and swelling test. The twenty specimens used to measure the water sorption ratio (soaking 24 hours) and ten of these were used for swelling ratio measurement The results obtained were as follows: 1) Larch was not suitable for wood-cement boards because larch-cement board developed no strength, but pine showed 97.9kg/$cm^2$ by hot water extraction. 2) To increase MOR, hot water extraction was more effective than the addition of $CaCl_2$ in pine and larch because the $CaCl_2$ addition was seemed to speed up the ratio of cement hydration without reacting with the wood substances. 3) The water sorption ratio was lowered by the addition of $CaCl_2$ to wood-cement system because the chemical additive accelerated the rate of cement hydration. 4) In pine-cement board, the swelling ratio from 0.37 to 0.42 percent was observed in length and the swelling ratio from 0.88 to 2.0 percent in thickness. As a rule, the swelling ratio of wood-cement board was very low and the swelling ratio in thickness was higher than in length.

• 시멘트 심포지엄
• /
• 통권37호
• /
• pp.229-235
• /
• 2010

• 한국환경보건학회지
• /
• 제40권6호
• /
• pp.484-491
• /
• 2014

Objectives: A radon emission reducing agent was prepared using charcoal and zeolite, and the amount was measured after coating construction materials with the agent. The availability of the radon emission reducing agent was evaluated. Methods: Construction materials (red brick, cement brick, and gypsum board) coated with reducing agent were placed in a chamber to measure radon emissions. The construction materials were coated one through three times. The spread volume for brick and gypsum board was 50 mL and 75 mL per application, respectively. The amount of radon emitted was measured by RAD-7 after 48 hours. Results: The reduction ratio increased with the number of coatings, and the reduction ratios for red brick, cement brick, and gypsum board were 63.3, 73.6, and 58%, respectively, in the case of three coatings of RA-1. The reduction ratios for red brick, cement brick, and gypsum board were 42.8, 58.1, and 26.2%, respectively in the case of three coatings with RA-2. RA-1 was slightly better than RA-2 in radon emission reduction. Conclusions: Radon emissions from construction materials decreased according to the concentration of reducing agent coating, and it was more effective than existing methods.