• 멤브레인
• /
• 제17권4호
• /
• pp.277-286
• /
• 2007

전 세계적으로 물 부족 문제를 해결하기 위한 한 가지 대안으로서 해수 담수화 기술이 높은 관심을 받고 있다. 본 연구에서는 해수 담수화를 위한 고효율 저에너지 소모 공정으로 떠오르고 있는 역삼투막의 제조를 위해 cellulose triacetate(CTA)의 적용 가능성을 살피고자 하였다. 염소에 대한 안정성과 유기물에 대한 저항성을 가지는 CTA를 사용하여 막을 제조할 시 아세틸화도, 용매, 첨가제와 같은 제막 조성의 변화가 막의 성능에 미치는 것으로 나타난다. 높은 아세틸화도와 CTA의 용매인 다이옥산과 아세톤의 비에서 다이옥산의 함량이 높을수록 높은 유량과 염 제거율을 가지는 막의 제조가 가능하다. 첨가제로는 acetic acid와 maleic acid가 선호된다. 실제 해수 담수화 플랜트에 상용화된 CTA 막($HOLLOSEP^{(R)}$)을 적용해 본 결과 다른 화학적 처리 없이 계속적인 염소 처리만으로 장기간 안정된 유량과 수질을 나타낸다.

• 한국염색가공학회지
• /
• 제16권5호
• /
• pp.28-34
• /
• 2004

The polarizing film application exploits the unique physicochemical properties between PVA(Poly vinyl alcohol) film and CTA(Cellulose triacetate) film. However, hardly any research was aimed at improving the adhesion characteristics of the CTA film by radio frequency(RF) plasma treatment at argon(Ar) gaseous state. In this report, we deal with surface treatment technology for protective CTA film developed specifically for high adhesion applications. After Ar plasma, surface of the films is analyzed by atomic force microscopy(AFM), roughness parameter and peel strength. Furthermore, the wetting properties of the CTA film were studied by contact angle analysis. Results obtained for CTA films treated with a glow discharge showed that this technique is sensitive to newly created physical functions. The roughness and peel strength value increased with an increase in treatment time for initial treatment, but showed decreasing trend for continuous treatment time. The result of contact angle measurement refer that the hydrophilicity of surface was increased. AFM studies indicated that no considerable change of surface morphology occurred up to 3 minutes of treatment time, but a considerable uneven of surface structure resulted from treating time after 5 minutes.

• 한국염색가공학회지
• /
• 제3권4호
• /
• pp.17-21
• /
• 1991

A rigid polymer, cellulose triacetate (CTA) dissolved in a combination of trifluoroacetic acid (TFA) and methylene chloride (MC) solution are liguid crystalline above a certain concentration. A flexible polymer, polyethylene terephthalate (PET) also dissolves in TFA/MC, but does not form liguid crystal phase. Ternary solutions, CTA/PET/TFA-MC which CTA and PET were mixed in a same solvent TFA/MC (6/4 : v/v) showed phase separation and mesophase formation.

• Bulletin of the Korean Chemical Society
• /
• 제34권5호
• /
• pp.1391-1396
• /
• 2013

The photocontrolled reduction of silver nitrate to silver (Ag) nanoparticles on honeycomb-patterned poly(N-vinylcarbazole) (PVK)-cellulose triacetate (CTA) composite thin films was studied. The composites were prepared via the oxidative polymerization of N-vinylcarbazole with ferric chloride using different CTA concentrations. A honeycomb-patterned film was fabricated by casting the composite solution under humid conditions. Ag particles with a homogeneous distribution were produced by the composite film in a moderate CTA concentration, whereas aggregated Ag was obtained from the pure PVK film.

• 한국염색가공학회지
• /
• 제4권1호
• /
• pp.26-29
• /
• 1992

Ternary solutions that cellulose triacetate (CTA) and polyethylene terephthate (PET) were mixed in a solvent trifiuoroacetic acid (TFA)/methylene chloride (MC) (6/4 : v/v) showed phase separation and mesophase formation. The ternary systems which were mesomorphic were spun into a methanol both and relatively strong cellulosic fillaments were successfully produced. Analysis showed that CTA/PET fibers have fibrillar structure and high orientation parallel to the fiber axis. These fibers proved to be molecular composite and have relatively high strength and modulus as spun.

• 한국염색가공학회지
• /
• 제6권1호
• /
• pp.44-48
• /
• 1994

Cellulose triacetate(CTA) liquid crystal solutions obtained via dissolution of CTA in solvent mixture of triflucroacetic acid and methylene chloride were spun and saponified in various chemicals. Among chemicals, methanol/sodium hydroxide mixture endowed highest tenacity as well as modulus to regenerated cellulosic fiber and the fiber thereof showed Cell I or Cell IV morphology, or mixed morphology of Cell I and IV.

• 한국응용과학기술학회지
• /
• 제26권4호
• /
• pp.428-433
• /
• 2009

Cellulose triacetate (CTA) was prepared from cotton linter and pulps which contain various contents of $\alpha$-cellulose. CTA which contains 2.8 of degree of substitution (DS) and 222 of degree of polymerization (DP) was obtained from V-81 pulp under the heterogeneous system. The DS was measured by the titration method, and the DP was obtained by measurement of viscosity. FT-IR spectometer (FT-IR 6300, JASCO) was used to analyze the chemical structure of raw materials and cellulose triacetate, and X-ray diffractometer (X-pert MPD PW3040, Philips) was used to confirm the crystal structure and to calculate the relative crystallinity index (RCI). As $\alpha$-cellulose content in pulp increased, the acetylation yield increased. Besides with a kind of pulp, it contains insoluble residue which was mainly formed due to the formation of glucomannan triacetate and xylan diacetate during the esterification.

• 멤브레인
• /
• 제21권1호
• /
• pp.98-105
• /
• 2011

본 연구에서는 셀룰로오스 트리아세테이트(CTA) 고분자를 이용한 중공사형 분리막을 상분리법에 의해 제조하였으며, 제조된 중공사 분리막의 기체분리 성능을 평가하였다. 제조된 중공사형 분리막의 기체분리 특성을 부여하기 위해서 1,4-dioxane을 10 wt.% 내외로 첨가하였다. 1,4-dioxane의 첨가에 의해 중공사 표면에 치밀층 형성을 위해서는 1,4-dioxane이 표면에서 증발되는 것이 필수적이며, 이를 위해 air-gap의 조절에 의해 중공사 표면에 치밀층이 생성되도록 하였다. 제조된 CTA 중공사형 기체분리막의 표면 및 단면의 모폴로지 측정을 위하여 전자주사현미경을 사용하였다. 또한 CTA 중공사형 기체분리막의 산소, 질소, 이산화탄소에 대한 기체투과도를 측정하였으며, 이 때 $P_{CO2}$ = 17 GPU, ${\alpha}_{CO2/N2}$ = 48을 나타내었다.

• Bulletin of the Korean Chemical Society
• /
• 제31권8호
• /
• pp.2207-2210
• /
• 2010

This paper describes the preparation and study of thermally stimulated discharge conductivity (TSDC) study of cellulose triacetate (CTA) - multiwalled carbon nanotubes (MWNTs) film thermoelectrets. TSDC has been carried out in the temperature range 308 - 503 K and at four different polarizing fields. The conductivity of the polymer blends increased with increase in temperature showing a semi-conducting behavior. The apparent activation energy also showed a pronounced effect with the increase in the content of MWNTs.

• 멤브레인
• /
• 제20권3호
• /
• pp.222-227
• /
• 2010

본 연구의 목적은 다양한 셀룰로오스 계 고분자를 이용한 정삼투(FO) 막을 제조하고 각각의 고분자 및 첨가제에 따른 성능의 차이를 평가하는 것이다. 셀룰로오스 아세테이트(CA)와 셀룰로오스 트리아세테이트(CTA)를 기반으로 상전환법을 통하여 정삼투막을 제조하고 가압조건과 정삼투 조건하에서 투과유량 및 염제거율을 비교하였다. CA 정삼투막은 용매의 증발 및 annealing 수행 시간에 따라 막의 성능의 변화가 발생하였으며, CTA 정삼투막의 경우에는 annealing보다는 첨가제를 활용하여 성능의 향상을 이끌어낼 수 있었다. 또한 CTA 정삼투막의 정삼투 투과유량은 $4.46\;L/m^2hr$였으나 CA/CTA 정삼투막의 경우에는 $8.89\;L/m^2hr$로, 단일 고분자를 사용하기 보다는 CTA에 CA를 혼합하여 막을 제조하는 것이 정삼투 투과유량 증가에 보다 효율적이었다.