• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권3호
• /
• pp.446-458
• /
• 2013

Recently, energy-efficient cellular transmission has received considerable research attention to improve the energy efficiency of wireless communication. In this paper, we consider a cellular network consisting of one base station (BS) and multiple user terminals and explore the network coding for enhancing the energy efficiency of cellular downlink transmission from BS to users. We propose the network coded cellular transmission scheme and conduct its energy consumption analysis with target outage probability and data rate requirements in Rayleigh fading environments. Then, the energy efficiency in Bits-per-Joule is further defined and analyzed to evaluate the number of bits delivered per Joule of energy cost. Numerical results show that the network coded cellular transmission significantly outperforms the traditional cellular transmission in terms of energy efficiency, implying that given a Joule of energy cost, the network coded cellular transmission scheme can deliver more bits than the traditional cellular transmission.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제4권4호
• /
• pp.560-574
• /
• 2010

In this paper, the relationship between the energy efficiency and spectrum efficiency in a two-cell cellular network is obtained, and the impact of multi-antenna on the energy efficiency of cellular network is analyzed and modeled based on two-state Markovian wireless channels. Then, the energy efficiency of multi-cell cellular networks with co-channel interference is investigated. Simulation results verify the proposed model and the energy-spectrum efficiency tradeoffs in cellular networks with multi-antenna and co-channel interference.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권3호
• /
• pp.1074-1086
• /
• 2015

We Relay-assisted cellular network architecture has been developed to cover cell-edge users and to improve capacity. However, the deployment of relay stations (RSs) in cellular networks may increase the total energy consumption. Though energy efficiency has become a major concern in cellular networks, little work has studied the energy efficiency of relay-assisted cellular networks by sleep scheduling. In this paper, a distributed base stations (BSs) sleep scheduling scheme in relay-assisted cellular networks is proposed. The goal is to maximize the energy efficiency under the spectral efficiency constraint. Firstly, whether the BSs should be sleeping or active is determined by the traffic profile. Then, the transmission powers of the active BSs are optimized within the game-theoretic framework, by using an interior-point method, so as to maximize the energy efficiency. Simulation results demonstrate that the effectiveness of the proposed scheme is superior to that turning on all the BSs without sleep scheduling.

• Structural Engineering and Mechanics
• /
• 제84권5호
• /
• pp.665-673
• /
• 2022

Additive manufacturing is an emerging method to manufacture objects with complex shapes and intricate geometry, such as cellular structures. The cellular structures can widely be used in lightweight application as it provides a high strength-to-load ratio. Under the various testing condition, each topology shows different mechanical properties. This study investigates the structural response of various types of cellular structures in compression loading, both experimentally and numerically. For that purpose, honeycomb, modified honeycomb, and spiral-type topology were selected to investigate. Besides, structural properties change by changing the cell size for each topology is also investigated. The specimens were subjected to a compression test by a universal testing machine to determine the absorbed energy and other mechanical properties. An implicit numerical study was also conducted to determine cellular structure's mechanical characteristics. The experimental and numerical results show that the honeycomb structure absorbs the maximum energy compared to the other structures. The experimentally and numerically calculated absorbed energy for the 4.8 mm honeycomb structure was 32.2J and 30.63J, respectively. The results also show that the increase of cell size for a particular cellular structure reduces the energy-absorbing ability of that structure.

• 한국멀티미디어학회논문지
• /
• 제15권12호
• /
• pp.1456-1463
• /
• 2012

In this paper, we study the ON/OFF control policy of base stations in two-tier heterogeneous cellular networks to minimize the total power consumption of the system. Using heterogeneous cellular networks is a potential approach of providing higher throughput and coverage compared to conventional networks with only macrocell deployment, but in fact heterogeneous cellular networks often operates regardless of total power consumption, which is a very important issue of modern cellular networks. We propose a policy that controls the activation/deactivation of base stations in heterogeneous cellular networks to minimize total power consumption. Under this policy, the total power consumed can be significantly reduced when the traffic is low while the QoS requirement is satisfied.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권2호
• /
• pp.462-483
• /
• 2016

The research on optimization of cellular network's energy efficiency (EE) towards environmental and economic sustainability has attracted increasing attention recently. In this survey, we discuss the opportunities, trends and challenges of this challenging topic. Two major contributions are presented namely 1) survey of proposed energy efficiency metrics; 2) survey of proposed energy efficient solutions. We provide a broad overview of the state of-the-art energy efficient methods covering base station (BS) hardware design, network planning and deployment, and network management and operation stages. In order to further understand how EE is assessed and improved through the heterogeneous network (HetNet), BS's energy-awareness and several typical HetNet deployment scenarios such as macrocell-microcell and macrocell-picocell are presented. The analysis of different HetNet deployment scenarios gives insights towards a successful deployment of energy efficient cellular networks.

• 한국정보통신학회논문지
• /
• 제20권10호
• /
• pp.1873-1880
• /
• 2016

셀룰러 네트워크를 운용하는데 드는 에너지의 대부분은 기지국에 의해서 소비되므로 에너지 효율적인 셀룰러 네트워크를 위하여 기지국의 송신 전력을 줄이는 것이 필요하다. 본 논문에서는 셀룰러 네트워크의 에너지 효율을 향상시키기 위한 목적으로 플로킹(flocking) 모델에 기반한 분산 송신전력제어 알고리즘을 제안한다. 새 무리에서 각각의 새가 자신의 속도를 인접한 이웃 새들의 평균 속도로 맞춰 날아가는 것과 같이, 제안 방안에서는 각 셀의 단말의전송률이 인접 셀의 같은 채널을 사용하는 단말의 평균 전송률과 같도록 서빙 기지국의 송신 전력을 제어한다. 모의실험 결과 제안한 분산 송신전력제어 알고리즘은 플로킹 모델과 같은 수렴 속성을 가지며, 셀 간 간섭이 증가함에 따라 낮은 아웃티지 확률을 유지하면서도 기지국의 전력 소모를 효과적으로 줄일 수 있음을 보여준다. 이를 통하여 제안 방안은 기지국 수가 20개 이상일 때 셀룰러 네트워크의 에너지 효율을 기존 방식 대비 두 배 이상 향상시킨다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권3호
• /
• pp.1057-1073
• /
• 2015

In this paper, we consider cooperative D2D communications in cellular networks. More precisely, a cellular user leases part of its spectrum to facilitate the D2D communication with a goal of improving the energy efficiency of a D2D pair. However the D2D pair is untrusted to the cellular user, such resource sharing may result in the information of this cellular user unsecured. In order to motivate the cellular user's generosity, this D2D pair needs to help the cellular user maintain a target secrecy rate. To address this issue, we formulate a joint spectrum and power allocation problem to maximize the energy efficiency of the D2D communication while guaranteeing the physical layer security of the cellular user. Then, a theorem is proved to indicate the best resource allocation strategy, and accordingly, an algorithm is proposed to find the best solution to this resource allocation problem. Numerical results are finally presented to verify the validity and effectiveness of the proposed algorithm.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권9호
• /
• pp.4145-4164
• /
• 2016

Energy harvesting is an increasingly attractive source of power for cellular networks, and can be a promising solution for green networks. In this paper, we consider a cellular network with power beacons powering multiple mobile terminals with microwave power transfer in energy beamforming. In this network, the power beacons are powered by grid and renewable energy jointly. We adopt a dual-level control architecture, in which controllers collect information for a core controller, and the core controller has a real-time global view of the network. By implementing the water filling optimized power allocation strategy, the core controller optimizes the energy allocation among mobile terminals within the same cluster. In the proposed green energy cooperation paradigm, power beacons dynamically share their renewable energy by locally injecting/drawing renewable energy into/from other power beacons via the core controller. Then, we propose a new water filling optimized green energy cooperation management strategy, which jointly exploits water filling optimized power allocation strategy and green energy cooperation in cellular networks. Finally, we validate our works by simulations and show that the proposed water filling optimized green energy cooperation management strategy can achieve about 10% gains of MT's average rate and about 20% reduction of on-grid energy consumption.

• 인터넷정보학회논문지
• /
• 제19권2호
• /
• pp.9-15
• /
• 2018

This paper proposes an energy efficient adaptive relay station ON/OFF scheme with different frequency reuse factors (FRFs) to enhance the system throughput and reduce the transmission energy consumption for the transparent mode of 2-hop cellular relay networks (CRNs) based on orthogonal frequency division multiple access and time division duplex. In the proposed scheme, the base station turns on or off the relay stations (RSs) when they are overutilized and undertuilized based on the traffic density of the cell coverage, respectively. Through the simulation results, we show that the proposed scheme outperforms the conventional CRN in terms of the energy consumption with the same system throughput. Further, in order to increase the system throughput with low energy consumption, the best way is FRF 1 when the number of operating RSs is up to 4 and FRF 2 otherwise.