• 반도체디스플레이기술학회지
• /
• 제7권2호
• /
• pp.13-17
• /
• 2008

In this paper, in order to get the characteristics of the lithium secondary cell, such as charge and discharge characteristic, temperature characteristic, self-discharge characteristic and the capacity recovery rate etc, we build a thermal model that estimate the impedance of battery by experiment & simulation. In this one-dimensional model, Seven governing equations are made to solve seven variables c, $c_s,\;\Phi_1,\;\Phi_2,\;i_2$, j and T. The thermal model parameters used in this model have been adjusted according to the experimental data measured in the laboratory. The result(Voc, Impedance) of this research can be used in BMS(Battery Management System), so an efficient method of using battery is developed.

• 한국ITS학회 논문지
• /
• 제10권1호
• /
• pp.16-26
• /
• 2011

가변속도제어(Variable Speed Limit ; VSL)는 교통상황에 따라 속도를 차등 제한하여 혼잡 또는 사고지점에 도달하기전 차량간, 차로간 속도편차를 감소시킴으로써 사고를 예방하고 총 지체를 최소화하기 위한 연속류 ITS기법 중 하나이다. 본 연구에서는 가변속도 제어시 연속류 기본구간의 동적교통류에 대한 수학적 분석결과를 기초로 가변속도제어 수행모형을 제시하고 효과분석을 수행하였다. 가변속도제어모형은 병목현상 발생시 상류부에 전파되는 충격파의 속도를 최소화 함으로써 지체를 감소시킬 수 있도록 graphical solution을 적용하여 제시한다. 또한 가변속도 제어시 해당 지점으로부터 하류부로 전파되는 충격파의 생성 및 움직임을 모형화 하여 재현하며 그 방법론으로는 Cell-Transmission Model 및 Supply-Demand Method를 적용하였다. 가변속도제어 적용에 따른 효과분석으로는 제어를 통한 지체감소의 효용성 및 안전도 측면에서 각 Cell별 속도 및 밀도의 표준편차의 개선정도를 살펴보았다. 향후 본 연구의 이론적 검증 및 분석 결과를 토대로 다양한 가변속도제어모형 및 운영방안을 개발할 수 있을 것으로 예상한다.

• 한국기계가공학회지
• /
• 제15권5호
• /
• pp.86-92
• /
• 2016

In this study, we used a polymer deposition system, based on fused deposition modeling, to fabricate the 3D scaffold and then fabricated micro-pores on a 3D scaffold using a salt leaching method. Materials included polycaprolactone (PCL) and sodium chloride (NaCl). The 3D porous scaffolds were fabricated according to blending ratio such as PCL (70 wt%)/NaCl (30 wt%) and PCL (50 wt%)/NaCl (50 wt%). The 3D porous scaffolds were observed by scanning electron microscopy. The results showed that 3D porous scaffolds had a deposition width of $500{\mu}m$, contained a pore size of $500{\mu}m$ and below $100{\mu}m$. To evaluate the 3D porous scaffolds for bone tissue engineering, we carried out the cell proliferation experiment using a CCK-8 and a mechanical strength test using a universal testing machine. In summary, the 3D porous scaffold was found to be suitable for cancellous bone of human in accordance with the result of in-vitro cell proliferation and mechanical strength. Thus, a 3D porous scaffold could be a promising approach for effective bone regeneration.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1663-1666
• /
• 2007

The finite element method is applied to analyze the deformation mechanisms in the closed-cell Al foam under the compression. The modeling of the real cellular structure proceeds with the concept of the reverse engineering. First of all, the small, $10{\times}\;10{\times}\;10mm^3$ sized specimens of the closed-cell Al foam are prepared. The micro focus X-ray CTsystem of SHIMADZU Corp. is used to scan the full structures of the specimens. The scanned structures are converted to the geometric surfaces and solids through the software for 3-D scan data processing, RapidFormTMof INUS Tech. Inc. Then the solid meshes are directly generated on the converted geometric solids for the finite element analysis. The large elastic-plastic deformation and 3-D contact problems for the Al cellular material are considered. The clear and successful analysis for the deformation mechanisms in the closed-cell Al foam is carried out through the comparison of the numerical results in this research with the referred experimental ones.

• 제어로봇시스템학회논문지
• /
• 제5권5호
• /
• pp.614-621
• /
• 1999

In this paper, the analytical appproaches are presented for jointly determining the profit-miximizing configuration of the fault-tolerance real time modular cell manufacturing system. The transient(time-dependent) analysis of Markovian models is firstly applied to modular cell manufacturing system from a performability viewpoint whose modeling advantage lies in its ability to express the performance that truly matters - the user's perception of it - as well as various performance measures compositely in the context of application. The modular cells are modeled with hybrid decomposition method and then availability measures such as instantaneous availability, interval availability, expected cumulative operational time are evaluated as special cases of performability. In addition to this evaluation, sensitivity analysis of the entire manufacturing system as well as each machining cell is performed, from which the time of a major repair policy and the optimal configuration among the alternative configurations of the system can be determined. Secondly, the recovery policies from the machine failures by computing the minimal number of redundant machines and also from the task failures by computing the minimum number of tasks equipped with detection schemes of task failure and reworked upon failure detection, to meet the timing requirements are optimized. Some numerical examples are presented to demonstrate the effectiveness of the work.

• Steel and Composite Structures
• /
• 제39권3호
• /
• pp.275-290
• /
• 2021

The main purpose of this research work is to investigate the critical buckling load of functionally graded (FG) porous plates with graphene platelets (GPLs) reinforcement using generalized differential quadrature (GDQ) method at thermal condition. It is supposed that the GPL nanofillers and the porosity coefficient vary continuously along the plate thickness direction. Generally, the thermal distribution is considered to be nonlinear and the temperature changing continuously through the thickness of the nanocomposite plates according to the power-law distribution. To model closed cell FG porous material reinforced with GPLs, Halpin-Tsai micromechanical modeling in conjunction with Gaussian-Random field scheme are used, through which mechanical properties of the structures can be extracted. Based on the third order shear deformation theory (TSDT) and the Hamilton's principle, the equations of motion are established and solved for various boundary conditions (B.Cs). The fast rate of convergence and accuracy of the method are investigated through the different solved examples and validity of the present study is evaluated by comparing its numerical results with those available in the literature. A special attention is drawn to the role of GPLs weight fraction, GPLs patterns through the thickness, porosity coefficient and distribution of porosity on critical buckling load. Results reveal that the importance of thermal condition on of the critical load of FGP-GPL reinforced nanocomposite plates.

• 한국시뮬레이션학회논문지
• /
• 제14권1호
• /
• pp.19-32
• /
• 2005

In this study, a distributed simulation of Petri net models under HLA/RTI framework is considered. Throughout our modeling experiences, it is recognized that the proper use of interface specification and time management services are important in order to achieve successful implementation of RTI. The interfacing tokens between Petri net models are distinguished as information entity and physical entity. Both entities are modeled as InteractionClass in order to send and receive messages. For the synchronization of local simulation clocks, a conservative method with NERA service is considered. A cell manufacturing system is modeled and implemented with RTI to illustrate the distributed simulation of Petri net models.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 전력전자학술대회 논문집
• /
• pp.433-437
• /
• 1998

Equalize SOC of the cell which effect on the charge.discharge ability and the efficiency of the battery, through the charge.discharge characteristic test of the battery source, and develope the high efficiency charge.discharge system in the series HEV have a constant engine-generator output. For this, in this paper, establish the electrical model and the condition of high efficiency charge.discharge, and proposed the improvement method of charge.discharge characteristic in the battery source that consist of twenty Ni-MH cells connected serial/parallel

• 한국융합학회논문지
• /
• 제8권8호
• /
• pp.17-26
• /
• 2017

집광형태양광발전시스템은 집광형태양전지 셀, 모듈, PCS, 태양위치추적기, 시스템설비와 그에 따른 시스템주변창치들로 구성된다. 이러한 다양한 요소를 반영하여 시스템모델링이 이루어져 집광형태양광발전시스템에 대한 분석과 모델링방법이 적용되어야 한다. 본 논문에서 제안된 이러한 다양한 요소를 반영하여 최적의 CPV 시스템 시뮬레이션을 제안하여 집광형태양광발전시스템 모델링과 에너지의 발생분석에 대한 최적 설계가 이루어지도록 모델링에 중점 두어 설계하였다. 손실 파라미터 계산 방법에 관한 일반화된 집광형태양광발전시스템의 계산된 시뮬레이션 결과는 높은 신뢰성과 안정성을 갖는 집광형태양광발전시스템의 최적의 설계가 가능하다. 손실 파라미터 계산 방법은 CPV 시스템 설계의 경제적 분석을 위한 시뮬레이션 및 다양한 데이터 활용을 위한 시뮬레이션방법을 활용할 수 있다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1263-1266
• /
• 1997

In a fault-tolerant modern manufacturing systms characterized by the configuration, in which automated redundant machines prone to unexpected failures are interconnected with other complex subsystems such as AGV's, robots, computer control systems to produce complete parts, faulures together with repairs and reconfigurations should be considered as the three basic events to be modeled for computing the performance of manufacturing systems. In this papre, transient analysis is applied to modular cell manufacturing systems form a performability viewpoint whose modeling adantage is that various performanc e measures can be evaluated compositely in the context of application. The hypothertical modular cells are modeled firstly with hybrid decomposition method and availability measures as special cases of performability are computed and comments on performabililty modeling analysis are mentioned.