• Journal of Biosystems Engineering
• /
• 제32권5호
• /
• pp.332-338
• /
• 2007

Yield mapping is necessary for precision farming. An on-site rice weighing system for a head-feed combine was developed to measure the total weight of rice grain harvested while the combine was operated. A load cell system was used to monitor rice weights accumulated into the combine grain tank using a load cell. This method gave cumulative grain weight readings as a function of time. The system consisted of a load cell, two supporting brackets, and a computer-based data acquisition system. The weights measured with the system from two fields were compared with those obtained with a commercially available electronic balance. The response of the load cell to varying grain weights was linearly modeled, showing a coefficient of determination of 0.998 and a standard error of ${\pm}4.09kg$.

• ETRI Journal
• /
• 제38권6호
• /
• pp.1218-1228
• /
• 2016

This paper proposes a robot hand for a violin-playing robot and introduces a newly developed robot finger. The proposed robot hand acts as the left hand of the violin-playing robot system. The violin fingering plays an important role in determining the tone or sound when the violin is being played. Among the diverse types of violin fingering playing, it is not possible to produce vibrato with simple position control. Therefore, we newly designed a three-axis load cell for force control, which is mounted at the end of the robot finger. Noise is calculated through an analysis of the resistance difference across the strain gauge attached to the proposed three-axis load cell. In order to ensure the stability of the three-axis load cell by analyzing the stress distribution, the strain generated in the load cell is also verified through a finite element analysis. A sound rating quality system previously developed by the authors is used to compare and analyze the sound quality of the fourth-octave C-note played by a human violinist and the proposed robot finger.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2000년도 추계학술대회 학술발표 논문집
• /
• pp.393-398
• /
• 2000

In this paper, we propose an Intelligent Monitoring Network System(IMNS) for the truck scale balance system. Truck scale balance system consis of three parts; Load cell part, Indicator part, and Junction box part. IMNS is attached to Junction box in truck scale balance system. Even if Load cell have been some problems, a truck scale balance system still has been run to determine, the values involved error. Therefore prosed system is has concentrated on Load cell part. Other Parts have been changed a portion of circuit for monitoring system.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(3)
• /
• pp.41-44
• /
• 2000

In this paper, we propose an Intelligent Monitoring Network System(IMNS) for The truck scale balance system. Truck scale balance system consis of three parts； Load cell part, Indicator part, and Junction box part. IMNS is attached to Junction box in truck scale balance system. Even if Load cell have been some problems, a truck scale balance system still has been run to determine, the values involved error. therefore prosed system is has concentrated on Load cell part. Other Parts have been changed a portion of circuit for monitoring system.

• 대한기계학회논문집A
• /
• 제37권5호
• /
• pp.685-691
• /
• 2013

로드셀형 풍향풍속계는 바람의 벡터적 성질을 이용한다. 본 연구를 통해 개발된 풍향풍속계는 기존과 달리 풍속계의 날개부가 회전하지 않는 고정형이다. 로드셀형 풍향풍속계를 개발하기 위해서는 측정된 4개 날개의 압력비와 풍향, 압력합과 풍속사이의 관계식을 각각 도출해야 한다. 본 연구에서는 압력비와 풍향사이의 관계식을 도출하기 위하여 각각 ANSYS CFX를 이용한 해석적 접근과 풍동실험을 이용한 실험적 접근을 적용하였다. 해석시 $0^{\circ}$에서 $90^{\circ}$까지 $7.5^{\circ}$ 간격으로 풍향조건을, 실험시 $10^{\circ}$ 간격으로 10가지 풍향조건을 설정하였다. 또한 실험 및 해석적 접근을 통해 압력비와 풍향사이의 관계식을 도출하였다.

• 한국정보과학회논문지:정보통신
• /
• 제29권5호
• /
• pp.466-472
• /
• 2002

본 논문에서는 계층적 셀 구조에서 umbrella 셀과 overlaid 셀 사이의 부하 분배 문제를 연구한다. 부하 분배 정책을 제안하고 HSDPA에서 인터넷 트래픽을 전달하는 경우를 시뮬레이션하여 제안된 정책의 성능을 평가한다. 평가 결과, 마이크로 셀이 피코 셀의 부하를 잘 분담해주는 것으로 나타났으며, 특히 특정한 피코 셀 집단에 큰 부하가 가해졌을 경우에 그 효과가 크게 나타났다. 이 정책을 사용할 경우, 비정상적인 큰 부하에 대처하기 위해 필요한 용량을 확보할 필요가 없어지므로 시스템 설치비용을 줄일 수 있게 된다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제1권1호
• /
• pp.22-32
• /
• 2000

This paper describes the development of a precision 3-component load cell with plate beams which may be used for measuring forces Fx, Fy and moment Mz simultaneously in industry. The equations to predict the bending strains on the surface of the beams under forces or moment are derived, the attachment location of strain gages of each sensor is determined, and 3-component load cell is carried out. It reveals that the rated strain calculated from the derived equations are good agreement with the results from Finite Element Method analysis.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1409-1412
• /
• 2005

Therefore this study focused on developing real-time system, which makes it possible for nurses to check the residual quantity and changing time of Ringer's solution in nurses' room. Load Cell is utilized as a sensor to check the residual quantity of Ringer's solution. This Load Cell detects the physical changes of Ringer's solution and transfers electronic signal to the amplifier. Amplified analog signal is converted into digital signal by A/D converter. Developed Embedded system, which computes these data with microprocess(8052) then makes it possible to monitor the residual quantity of Ringer's solution real-time on a server computer. A Checking system on Residual Quantity of Ringer's Solution Using Load cell cut costs using a simple design for a circuit

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.481-485
• /
• 2003

This study describes the real-time measurement system which consist of multi-components load cell and linear motor. Operationg and data acquisition is controlled by PC. Multi-components load cell measures simultaneously the vertical force Fz and frictional force Fx when contactors move on sample surface. Linear motor is used to translate with constant speed without vibration. The frictional coefficient is calculated by Matlab$^{TM}$. The frictional coefficients between Al. plates. and fingertip and fabrics are measured.d.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.947-953
• /
• 2010

The KTX-Sancheon has been commercially operating on the high-speed line since March. 2. In order to verify the performance of high-speed train and core equipments such as current collection system, sophisticated tests and evaluating procedures should have been considering. In this paper, the load cell with a built-in strain-gauge which developed to improve measuring method of contact force between the pantograph and catenary system is introduced. The static test results of the load cell shows that its design is very suitable and applicable for the dynamic test and on-line test. After the test and evaluation of load cell's dynamic calibration with pantograph, we will be applied to test interaction characteristics between the pantograph and catenary system on the high-speed line.