• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.9A
• /
• pp.1372-1382
• /
• 1999

The major source of errors in high-speed networks such as Broadband ISDN(B-lSDN) is buffer overflow during congested conditions. These congestion errors are the dominant sources of errors in 1high-speed networks and result in cell losses. Conventional communication protocols use error detection and retransmission to deal with lost packets and transmission errors. However, these conventional ARQ(Automatic Repeat Request) methods are not suitable for the high-speed networks since the transmission delay due to retransmissions becomes significantly large. As an alternative, we have presented a method to recover consecutive cell losses using forward error correction(FEC) in ATM(Asynchronous Transfer Mode)networks to reduce the problem. The performance estimation based on the cell discard process model has showed our method can reduce the cell loss rate substantially. Also, the performance estimations in ATM networks by interleaving and IP multicast service are discussed.

• Journal of Korea Multimedia Society
• /
• v.6 no.7
• /
• pp.1239-1244
• /
• 2003

In this paper, we analyzed cell loss rate performance for random traffic sources in wireless ATM(Asynchronous Transfer Mode) access architecture, which consists of access node and wireless channel. Applying queueing model to cell level at access node and considering burst error characteristics in wireless channel, we derived a formula about the cell loss rate of the random traffic in the wireless ATM access architecture. We also applied FEC(Forward Error Correction) schemes to improve the cell loss rate of random traffic. When we applied FEC schemes in the wireless ATM access architecture, we confirmed that the concatenated code provides the most superior performance compared to any other codes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.5
• /
• pp.1083-1096
• /
• 1997

To implement satellite B-ISDN/ATM network, it needs to gurantee reliable transport via satelite in the poor BER environment. So, it requires to use channel coding (FEC:Forward Error Correction) schemes for improvement of BER performance, but these coding effects evoke burst errors and degradation of the QoS. Therefore we have to investigate new algorithm that compensates these weaknesses. We consider convolutional coding and concatenated coding among FEC schemes as FEC for satellite transmission and choose different compensational algorithm by the error characteristics of the using type of FEC. In using concatenated coding, this paper proposes the satellite system structure for interconnection to the terrestrial network and proposes the channel coding algorithm for improvement of transmission performances. We execute performance evaluation of the proposed algorithm by computer simulation. In detail, we propose 4 types of application ATM cell to the block coding(Reed-Solomon) and propose the new 55 byte ATM cell that enforces the error correction capability of cell header by the BCH coding. Then we propose the outer interleaverand the cell unit interleaver that evoke maximum coding effect of BCH code.

• Journal of IKEEE
• /
• v.3 no.1 s.4
• /
• pp.93-100
• /
• 1999

When providing MPEG-2 video service through the ATM network, the degradation of QoS caused by cell losses and cell errors occuring from ATM netwok was assessed by the end-users subjectively and then the relation between CLR, CER and subjective QoS of MPEG-2 video was analyzed. Cell losses and cell errors occuring from the ATM network were generated according to the normal and exponential distribution by NEM module. Video sources were divided into sports and drama by moving feature and were tested. The results of our experiments show that the excellent quality of subjective QoS grade 5 was achieved for a cell loss rate of $2{\times}10^{-7}$ and for a cell error rate of $2{\times}10^{-7}$ and the good quality of subjective QoS grade 4 was achieved for a cell loss rate of $2{\times}10^{-6}$ and for a cell error rate of $2{\times}10^{-6}$ When providing MPEC-2 video service through the ATM network, the results of our experiments will be used as valuable information to determine the network performance objectives for satisfying the QoS required by the end-users and to design the network.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.1
• /
• pp.53-56
• /
• 2008

The commercial parallel plate electrodes system with guard-ring electrode have been widely used for measurement of dielectric constants of solid materials. And the specification of the electrodes system is about 1 % of measurement uncertainty. This measurement uncertainty is only estimated the error come from mechanical measurements such as the area of the electrodes and the gap between the electrodes except the error come from the air gap between the electrodes and dielectric specimen. Because it is impossible to measure the air gap. This study analyze the total measurement uncertainties of the commercial dielectric constant test cell using 3 kinds of Standard Reference Materials. As a results, the total measurement uncertainty is much bigger than 1 % and the most of the uncertainty can be reduced by compensation of the error values evaluated in this study.

• YAKHAK HOEJI
• /
• v.47 no.5
• /
• pp.261-265
• /
• 2003

Near-infrared (NIR) system was used to determine rapidly and simply indomethacin in buffer solution for a dissolution test of tablets and capsules. Indomethacin standards were prepared ranging from 10 to 50 ppm using the mixture of phosphate buffer (pH 7.2) and water (1 : 4). The near-infrared (NIR) transmittance spectra of indomethacin standard solutions were collected by using a quartz cell in 1 mm and 2 mm pathlength. Partial least square regression (PLSR) was explored to develop calibration models over the spectral range 1100∼1700 nm. The model using 1 mm quartz cell was better than that using 2 mm quartz cell. The PLSR models developed gave standard error of prediction (SEP) of 0.858 ppm. In order to validate the developed calibration model, routine analysis was performed using another standard solutions. The NIR routine analysis showed good correlation with actual values. Standard error of prediction (SEP) is 1.414 ppm for 7 indomethacin samples in routine analysis and its error was permeable in the regulation of Korean Pharmacopoeia (VII). These results show the potential use of the real time monitoring for indomethacin during a dissolution test.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.6
• /
• pp.50-56
• /
• 1994

A DC generator control system was designed to control the torque of a rotating shaft precisely. The control system is composed of a strain gage type torque cell, a torque cell amplifier, a computer, a D/A converter, a error detector, a DC voltage amplifier and a resistor. The response test under unit step input and the dynamic stability test for the designed control system were carried out. It was confirmed that the settling time from the response test is about 4 s and the error from the dynamic stability test is less than 0.06% of rated output of torque cell. The designed control system may be used to control a DC generator which may be used to apply torque to a rotating shaft.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.3 s.96
• /
• pp.222-232
• /
• 1999

This paper describes the development of a precision 3-component load cell with plate beams which may be used for measuring forces Fx, Fy and moment Mz simultaneously in industry. We have derived equations to predict the bending strains on the surface of the beams under forces or moment. We have also determined the attachment location of strain gages of each sensor and fabricated 3-component load cell. To evaluate the rated strain and interference error of each sensor, we have carried out characteristic test of precision 3-component load cell. It reveals that the rated strain calculated from the derived equations are good agreement with the results from Finite Element Method analysis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.8A
• /
• pp.1195-1207
• /
• 1999

Wireless channel has high error rate and limited bandwidth. In order to guarantee the quality of service for multimedia through wireless channel, wireless ATM network requires the cell structure with error control schemes and an efficient medium access control protocol. In this paprt, an efficient medium access control protocol, which is considered of cell structure and the QOS, is proposed for wireless ATM networks. Many kinds of ATM cell structures are analyzed in terms of cell error rate and cell loss rate to choose the proper cell structures for this proposed MAC protocol. And a bandwidth allocation algorithm is also designed to satisfy the priority of services. The performance of proposed MAC protocol are evaluated in terms of channel utilization, call blocking and packet discard probability accotding to different kinds of cell structure through simulation.

• Journal of the Korean Data and Information Science Society
• /
• v.24 no.4
• /
• pp.815-824
• /
• 2013

Traditional Pearson chi-squared test is not appropriate for the data collected by the complex sample design. When one uses the traditional Pearson chi-squared test to the complex sample categorical data, it may give wrong test results, and the error may occur not only due to the biased variance estimators but also due to the biased point estimators of cell proportions. In this study, the design based consistent Wald test statistics was derived for k-population homogeneity test, and the traditional Pearson chi-squared test statistics was partitioned into three parts according to the causes of error; the error due to the bias of variance estimator, the error due to the bias of cell proportion estimator, and the unseparated error due to the both bias of variance estimator and bias of cell proportion estimator. An analysis was conducted for empirical results of the relative size of each error component to the Pearson chi-squared test statistics. The second year data from the fourth Korean national health and nutrition examination survey (KNHANES, IV-2) was used for the analysis. The empirical results show that the relative size of error from the bias of variance estimator was relatively larger than the size of error from the bias of cell proportion estimator, but its degrees were different variable by variable.