• 대한화장품학회지
• /
• 제34권1호
• /
• pp.43-50
• /
• 2008

세라마이드는 콜레스테롤, 지방산과 함께 각질층을 구성하는 주요성분으로 각질층의 피부장벽 기능에 중요한 역할을 하며, 아토피 피부염, 건선, 건성습진, 주부습진 등과 같은 염증성 피부질환 방지에 도움이 되는 것으로 알려져 있다. 본 연구에서 2-(2-amino-ethylamino)-ethanol(AEEA)을 출발물질로 하여 신규 유사세라마이드 BPC-16을 합성하고, 그 물리화학적 성질과 화장품의 신규 소재로 활용하기 위하여 세포독성, 보습, 각질제거효능 등을 평가하였다. 합성된 BPC-16을 이용하여 콜레스테롤, 스테아린산을 포함하는 에멀젼을 제조했고, 편광현미경에서 'Maltese Cross'를 확인함으로써 BPC-1이 라멜라 에멀젼을 형성함을 확인하였다. 단층배양세포와 삼차원배양세포에서의 세포독성 실험에서 BPC-16은 보습과 피부손상회복 효과를 보이는 10 mM 이하의 농도에서 독성이 없음을 확인하였다. BPC-16의 보습효능을 확인하기 위하여 Vapormeter와 Corneometer를 이용하여 임상실험을 실시하였으며, 우수한 효과를 확인할 수 있었다. 또한, 피부손상에 대한 회복효과와 Visioscan을 이용한 각질량의 변화 실험에서도 우수한 효과를 확인하였다.

• Radiation Oncology Journal
• /
• 제22권4호
• /
• pp.298-306
• /
• 2004

목적:. 방사선 감수성이 다른 마우스 조직에서 apoptosis 유도 수준을 확인하고 방사선 감수성에 관여 된 인자를 Proteomics를 통해서 확인한다. 대상 및 방법: C3H/HeJ 마우스에 10 Gy 방사선을 조사하고 8시간 후 비장과 간을 채취하여 apoptosis 유도 수준을 비교 분석하였다. 조직에서 단백질을 추출하여 2-dimension electrophoresis (2-DE)를 실시하였다. 2-DE에서 방사선에 의해 발현의 변화를 보이는 gel의 spot를 trypsin 처리하여 MALDI-TOF 측정한 후 Swiss-prot database를 통하여 단백질 을 동정하였다. 결과: Apoptosls index는 방사선 조사 후 비장 조직에서 $35.3{\pm}1.7{\%}$, 간조직은 $0.6{\pm}0.2{\%}$로 비장에 비해 간 조직이 낮게 나타났다. Proteomoics 결과에서 방사선 내성 조직인 간은 ROS대사에 관여되는 단백질인 glutathione Stransferase Pi, carbonic anhydrase, NADH dehydrogenase, peroxiredoxin VI, riken cDNA 등이 방사선 조사 후 증가되었고 apoptosis 관련된 단백질인 cytochrome c는 간과 비장 조직에서 확인되었다. 그러나 방사선 민감 조직인 비장에서는 방사선 조사 후 산화적 Stress에 관련된 단백질, apoptosis 관련 단백질, 신호 전달에 관련된 단백질, 면역반응, cell cycle, Ca 신호 전달, 대사 cycle에 관련된 단백질 등이 방사선에 관련하여 발현의 변화를 보여 주었다. 결론 : Apoptosis유도 수준이 다른 조직에서 apoptosis에 관련된 단백질과 redox에 관련된 단백질은 방사성 감수성 조절에 관련된 것으로 보인다.

• Parasites, Hosts and Diseases
• /
• 제29권4호
• /
• pp.315-324
• /
• 1991

한국산 닭으로부터 분리한 크립토스포리디움(Cryptosporidium)의 중형 오오시스트를 SPF 병아리에 경구투여하여 그 분변속에의 오오시스트의 크기 및 배출양상과 파브리시우스낭 조직에서 많이 발견되는 여러 발육기의 미세구조를 관찰하였다. 병아리에 있어서 prepateat period는 평균 5.9일간, patent period는 $12.87{\pm}3.4$일간, 오오시스트 배출 정점기는 접종후 $12{\pm}2.78$일째, 그리고 일반적으로 8일째부터 14일째까지 1주일간에 걸적 다수의 오오시스트가 분변으로 배출되었다. 이 원충의 거의 모든 발육기의 미세구조는 C. muris를 제외한 사람을 포함한 포유동물과 조류에서 이미 발견된 것들과 거의 비슷하지만 분변으로 배출되는 오오시스트의 크기는 Kinyoun 항산염색(변법)표본에서 $5.24{\pm}0.44{\times}4.86{\pm}0.37{\mu\textrm{m}}$, 오스윰산 증기고정 Giemsa 염색표본에서 $6.06{\pm}0.23{\times)4.86{\pm}0.34$\mu\textrm{m}$이었다. 이상의 연구결과를 기초로 하여 한국산 닭유래 크립토스포리디움을 C. baileyi라고 동정한다.

• 대한치과교정학회지
• /
• 제29권6호
• /
• pp.673-688
• /
• 1999

본 연구는 multiloop edgewise arch wire(MEAW)의 기계적 특성을 분석하기 위해, 1) 개별 브라켓간 부위에서의 MEAW의 하중변형률을 수종의 재질로 된 동일 규격의 교정용 호선과 비교하고, 2)개별 브라켓간 부위와 multi-L-loop 부위(측절치 브라켓의 원심연과 제2대구치 튜브의 근심연간의 거리)에서의 wire stiffness를 비교하며, 3)단일 L-loop와 multi-L-loop의 하중변형률에 대한 공학적 이론식을 유도하여 MEAW의 하중변형특성을 규명하고자 시행하였다. 5가지의 서로 다른 수평길이를 지닌 L-loop와 5개의 L-loop로 구성된 상하악의 multi-L-loop를 .$016\times.022$ inch의 stainless steel 강선으로 제작하였고, .$016\times.022$ inch의 Plain stainless steel, TML NiTi를 준비하였다. Instron model 4466 만능시험기에 50N 용량의 load cell을 부착하여 crosshead의 속도 1.0min/분, 브라켓간 부위의 시험시에는 최대변위량 1.0mm로 각 브라켓간격에서 측정하였고, multi-L-loop부위의 경우는 최대변위량 10mm, 42mm의 거리에서 측정하였다. 반복된 실험에 의해 발생할 수 있는 응력에 따른 물리적 성질 변화의 가능성을 배제하기 위해 각 조건마다 동일한 5개의 시편을 사용하였다. 측정된 하중변형률과 각 실험의 브라켓간격을 이용하여 각 브라켓부위에서의 L-loop의 wire stiffness number를 계산하였고 이를 multi-L-loop의 그것과 비교하였다. 5개의 loop로 구성된 multi-L-loop를 35개의 직선구간으로 나누어 각 구간의 에너지를 계산, 총합을 낸 후 가해진 외력으로 미분하여 하중변형률의 이론식을 유도하였으며, 이를 wire stiffness로 환산하여 단일 L-loop의 wire stiffness와 비교하였다. 그 결과는 다음과 같았다. 1) 각 브라켓 간격에서의 L-loop의 하중변형률은 평균적으로 stainless steel wire의 1/5.16, NiTi의 1/l.53, TMA의 1/2.47이었다. 2) multi-L-loop부위 에서의 MEAW의 wire stiffness는 개개 브라켓간 간격에서보다 평균 1.53배 더 높았고, 같은 부위에서의 NiTi보다 1.9배 더 높았다. 3) 유도된 하중변형률의 이론식에 따르면, 부위에 따라서 wire stiffness의 차이를 보이지 않는 직선 강선과는 달리, L-loop가 부여된 경우, 개별 L-loop의 ire stiffness는 전체 multi-L-loop의 wire stiffness보다 낮은 것으로 나타났다. 이상의 연구결과로 미루어 볼 때, MEAW는 개별적인 치아이동을 허용하면서, 가해진 교정력을 효과적으로 전체 치열로 전달할 수 있는 독특한 기계적 특성을 지니고 있는 것으로 생각된다.

• Clinical and Experimental Reproductive Medicine
• /
• 제23권3호
• /
• pp.247-268
• /
• 1996

여포와 난포의 성숙, 배란과 착상, 임신의 유지와 태아의 성장 발달, 분만 및 유선발육과 비유 등 일련의 생식현상에서 있어서 성선자극호르몬과 스테로이드 호르몬의 작용이 중추적인 역할을 한다는 사실은 오래 전부터 알려져왔다. 그러나 이러한 일련의 현상에 고전적인 호르몬 외에도 다수의 성장인자가 관여되고 있음이 최근의 연구 결과 밝혀지고 있다. 생식기관에서 성장인자들은 대부분 autocrine/paracrine mode로 작용하여, 성선자극호르몬과 스테로이드 호르몬의 작용을 매개하거나 이들 호르몬 등과 교호적인 작용(synergy)을 한다. 생식기관 내 insulin-like growth factor(IGF) system은 최근 가장 활발히 연구된 분야 중의 하나로 생식현상의 전반에 걸쳐 중요한 역할을 하고 있음이 밝혀졌다. 본 지면에서는 IGF system에 관한 개괄적인 정보를 소개하고 현재까지 보고된 intrauterine IGF system에 관한 연구를 요약하고자 한다. IGF family는 IGF-I과 IGF-II ligands, 두종류의 IGF receptors(수용체), 그리고 지금까지 발견된 6종류의 IGF-binding proteins(IGFBPs)로 이루어져 있다. IGF-I과 IGF-II는 proinsulin과 상동한 구조를 가진 peptide로서 포도당과 아미노산 운반을 자극하는 등 insulin과 유사한 작용을 한다. 이 외에도 IGFs는 세포분열촉진제(mitogens)로서 여러 형태의 세포에 걸쳐 세포증식을 자극하고, 세포의 분화(differentiation)과 세포기능의 발현에 관여한다. IGFs는 간과 주로 messenchymal cells에서 발현되어 endocrine mode는 물론 autocrine/paracrine mode로 거의 모든 조직에 작용한다. IGF 수용체는 두종류가 알려져 있는데 type I IGF receptor는 tyrosine kinase로서 IGF-I과 IGF-II에 공히 high-affinity를 나타내고, 상기한 대부분의 IGFs의 작용을 매개한다. Type II IGF receptor 혹은 IGF-II/mannose-6-phosphate receptor는 두개의 서로 다른 binding sites를 가지고 있는데 IGF-II binding site는 IGF-II에만 high-affinity를 나타낸다. Type II IGF receptor의 주요 역할은 IGF-II를 lysosomal targeting하여 ligand를 파괴하는데 있다. 체액 속의 IGFs는 대부분 IGFBP에 결합되어 있다. IGFBPs는 IGF의 저장/운반체 혹은 IGF 작용을 조절하는 역할을 하는 것으로 알려져 있으나 개개 IGFBP의 역할에 대해서는 지극히 제한된 정보만이 알려져 있다. IGFBPs의 IGF ligands에의 affinity는 IGF receptors의 IGFs에의 affinity보다 크기 때문에 대부분의 in vitro 상황 하에서 IGFBPs는 IGF 작용을 억제한다. IGFBP에 결합되어 있는 IGF가 어떤 기작에 의해 IGFBP로부터 분리되어 IGF receptor에 도달하는지는 알려지지 않고 있으나, 혈액과 조직액에 들어있는 불특정 IGFBP protease activity는 IGF의 방출과정에서 일역을 하는 것으로 믿어지고 있다. 최근 연구보고에 의하면 특정 in vitro 상황 하에서 IGFBP-1, -3, -5 등은 IGF와 무관한 작용도 있다는 증빙이 있어 IGF system의 또 다른 차원을 예고하고 있다. IGF family members의 mRNAs & proteins는 영장류, 설치류 및 가축의 자궁조직과 수태물(conceptus)에서 발현되어 자궁과 태아의 성장 발달에 중요한 역할을 한다. 자궁조직의 IGF system의 발현은 성선호르몬, 국소 생리조절인자 등에 의해 발현시기와 장소의 특이성이 결정되며, 발현된 IGFs와 IGFBPs는 autocrine/paracrine mode로 자궁조직에 작용하기도 하고, 자궁강에 분비되어 수태물의 성장 발달에 관여한다. 착상을 전후하여 수태물에서도 IGF system이 발현되는데 개개 IGF family member의 발현 시기는 모체로부터 유래된 mRNA의 유무, 수태물 자체의 genetic programming, 모체와의 상호작용 등에 의해 결정되고, IGFs의 작용 부위 역시 시간(생리적 상태)과 장소의 특이성이 있다. 이와같이 conceptus IGF system의 발현이 시간적, 공간적으로 조절되고있다는 사실은 IGFs가 수태물의 성장 발달에 일역을 한다는 가설을 간접적으로 지지해 준다. 자궁조직과 수태물에서 발현된 IGFs는 세포의 증식과 분화, 포도당과 아미노산의 운반과 단백질합성, placental lactogen과 prolactin 등과 같은 유선자극호르몬의 생성을 자극하고 스테로이드 호르몬의 합성에도 관여한다. 태아의 성장 발달에 있어서 IGFs의 역할은 embryo의 IGF-I, IGF-II, 혹은 IGF receptor gene을 homologous recombination technique에 의해 파괴(gene targeting)하여을 때의 결과로써 입증되었다. 생쥐의 IGF and/or IGF-II gene 혹은 IGF receptor gene을 파괴했을 때 출생 전후 모두 성장 발달이 지연되며 출생시 무게는 정상치의 30-60% 수준에 머물고, 특히 type I IGF receptor gene 혹은 IGF-I과 IGF-II genes를 모두 파괴했을 경우에는 출생 후 곧 치사한다. 자궁 내의 IGFBPs는 IGF ligands를 자궁 내에 제한시키거나 IGFs의 receptor binding을 억제하는 negative regulators 역할을 하는 것으로 믿어지고 있다. 그러나 영장류의 자궁에서 IGFBP-I과 같은 특정 IGFBP는 IGFs보다 월등히 많은 양이 발현 분비되고 있는 것으로 추산되고 있으며, 또한 이 단백질은 모체탈락막세포에서 분비되는 주요 단백질 중의 하나라는 점을 감안할 때 IGFBP-I이 IGF과 무관한 작용이 있을 가능성도 배제할 수 없다. 따라서 IGFBPs의 역할 규명은 IGF system을 이해하는데 중요한 부분을 차지하고 있어 향후 이 분야의 연구에 많은 기대와 촛점이 모여지고 있다.

• 한국광물학회지
• /
• 제6권2호
• /
• pp.57-79
• /
• 1993

백운암질 대리암의 다변성 교대 작용에 의해서 생성된 춘천 연옥은 산출 상태, 광물상 및 조직상의 특징에 따라 연녹색 연옥, 녹색 연옥, 암녹색 연옥, 및 회색 연옥으로 구분된다. 연옥은 주로 극미립상(대개 $2{\mu}m$ 이내의 결정폭)의 침상 내지 섬유상(결정의 길이/폭 비>10) 투각섬석 결정들로 구성되고 미립의 투휘석, 방해석, Mg-녹니석, 스핀 등이 불순물로서 극소량 수반된다. 연옥 특유의 강한 인성은 편향 결정화된 연옥질 투각섬석 결정들이 다소 만곡된 형태로 섬유상의 치밀한 조직을 이루는 것에 기인한다. 춘천 연옥 특유의 녹색은 발색소로서 Cr이나 Ni보다 Fe 함유 정도에 보다 의존되는 경향을 보인다. 그러나 연옥의 다양한 색깔과 색조는 그외에 연옥의 결정도 및 조직 그리고 불순 광물의 종류 및 함유 정도에도 영향을 받는 것으로 나타난다. 연옥질 투각섬석은 주요 성분들의 함유도에 있어서 다소 산포되는 양상을 나타내고, 녹색의 색조가 상대적으로 짙은 연옥일수록 Al과 Mg/Ca의 함유 정도가 보다 높은 경향을 보인다. 또한 Fe의 함유 정도는 전반적으로 낮은 수준이지만 암녹색 연옥에서의 투각섬석이 상대적으로 다소 높게 함유되는 특징이 있다. 연옥질 투각섬석은 고분해능 투과 전자현미경 하에서 주로 3중의 쇄형 격자 단위가 불규칙하게 정상의 2중 쇄형 격자들 사이에 개재되어 소위 피리볼 구조형을 이루는 현상이 흔히 관찰된다. 이와 같은 일종의 혼성 격자 구조는 모든 유형의 춘천 연옥에서 나타나는 것으로, 3중 쇄형 격자 이외에 5중 쇄형 격자와 드물게 4중 쇄형 격자(회색 연옥)도 정상적인 2중 쇄형 격자들 사이에서 불규칙적으로 다양하게 혼재한다. 연옥질 투각섬석의 2중 쇄형 격자에서 보다 폭이 넓은 쇄형 구조 단위들의 불규칙한 혼재 양상은 연옥의 녹색이 짙을수록 심화된다. 이는 투각섬석의 결정 화학적 측면에서 Al과 Mg/Ca의 함유비 증가, 화학적 일정성의 저하, (110) X-선 회절선의 강도 저하, 및 b축 단위포 격자 상수 값의 증가와 밀접히 연관된다. 춘천 연옥에서 관찰되는 혼성 격자 구조의 존재 형식과 빈도 추이는 연옥의 생성이 Mg이 풍부한 광화 용액의 급격한 확산과 이에 따른 높은 준안정도 조건에서 이루어졌음을 시사하는 것으로 해석된다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.