• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.5
• /
• pp.1077-1083
• /
• 2015

In this paper, we introduce an energy-efficient opportunistic interference alignment (OIA) scheme that greatly improves the sum-rates in multi-cell uplink networks. Each user employs optimal transmit vector design and power control in the sense of minimizing the amount of generated interference to other-cell base stations while satisfying a required signal quality. As our main result, it is shown that owing to the reduced interference level, the proposed OIA schemes attains larger sum-rates than those of OIA with no power control for almost all signal-to-noise ratio regions. In addition, when both zero-forcing and minimum mean square error (MMSE) detectors are employed at the receiver along with the OIA scheme, it is shown that the OIA scheme with MMSE detection shows superior performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.2
• /
• pp.273-284
• /
• 2015

The feasibility conditions of interference alignment (IA) are analyzed for reverse duplex systems, in which one cell operates as downlink (DL) while the other cell operates as uplink (UL) assuming one-sid base station (BS) cooperation. Under general multiple-input and multiple-output (MIMO) antenna configurations, a necessary condition and a sufficient condition for one-shot linear IA are established, i.e., linear IA without symbol or time extension. In several example networks, optimal sum degrees of freedom (DoF) is characterized by the derived necessary condition and sufficient condition. For some special class of networks, a sufficient condition is established in a more compact expression, which also yields the necessary and sufficient condition. Simulation results demonstrate that the proposed IA does not only achieve larger DoF but also significantly improves the sum rate in the practical signal-to-noise ratio (SNR) regime.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.2
• /
• pp.109-115
• /
• 2023

In this paper, we demonstrated the orientation characteristics of liquid crystals using UV-treated FSAM as alignment layer. Moreover we confirmed the FSAM properties before and after UV treatment on indium tin oxide (ITO) glass substrates using physicochemical analysis. The hydrophobic property of the FSAM surface is change to hydrophilic through UV treatment. After UV treatment the LC molecules also were uniformly and horizontally aligned on the FSAM surfaces and the pretilt angle was obviously changed 90° degrees to 0° degrees. EO characteristic of TN cell which was fabricated with UV-treated FSAM was faster response time compare to conventional PI layer. The FSAM before and after UV treatment has a superior application potential as the LC alignment layer for LCD, potentially replacing the conventional polyimide layer.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.239.2-239.2
• /
• 2016

Numerous studies and approaches have been performed for solar cells to improve their photoelectric conversion efficiencies. Among them, the study for electrode containing transparent conducting oxide (TCO) layers is one of issues as well as for the cell structure based on band theory. In this study, we focused on an interfacial layer between p-type silicon and indium tin oxide (ITO) well-known as TCO materials. According to current-voltage characteristics for the sample with the interfacial layers, the improvement of band alignment between p-type silicon and ITO was observed, and their ohmic properties were enhanced in the proper condition of deposition. To investigate cause of this improvement, spectroscopic ellipsometry and ultraviolet photoelectron spectroscopy were utilized. Using these techniques, band alignment and defect in the band gap were examined. The major materials of the interfacial layer are vanadium oxide and tungsten oxide, which are notable as a hole transfer layer in the organic solar cells. Finally, the interfacial layer was applied to silicon solar cells to see the actual behavior of carriers in the solar cells. In the case of vanadium oxide, we found 10% of improvement of photoelectric conversion efficiencies, compared to solar cells without interfacial layers.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1533-1536
• /
• 2006

A novel single cell gap transflective liquid crystal display was developed. By using the ink jet printing technology, we fabricated a transflective liquid crystal display with the hybrid alignment in the reflective region and the homogeneous alignment in the transmission region. Compared with the traditional technologies, our technology provided the advantages of easy process, high yield, fast throughput, and less material usage. We also applied this technology to the 2.4 inch prototype. This panel could be implemented in the handheld product applications.

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1258-1260
• /
• 1998

In this study, we investigated the generation of pretilt angle for nematic liquid crystal (NLC) in a cell with oblique non-polarized ultraviolet (UV) light irradiation on polyimide (PI) surfaces. It was found that the monodomain alignment of the NLC is obtained with an angle of incidence of $70{\sim}85^{\circ}$ on PI surface. We consider that the monodomain alignment of NLC is attributed to anisotropic dispersion force due to photo-depolymerization of polymer on PI surfaces. Also, pretilt angle of NLC is generated about $3^{\circ}$ with an angle of incidence of $70{\sim}75^{\circ}$. It is considered that the pretilt angle generation in NLC is attributed to interaction between the LC molecules and the polymer surfaces.

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1261-1263
• /
• 1998

In this paper, we obtained that the monodomain alignment of nematic liquid crystal (NLC) increases with increasing irradiation time with linearly polarized ultraviolet (LPUV) light irradiation on polyimide (PI) surfaces. It was found that the monodomain alignment of NLC is obtained in a cell with normally LPUV light irradiated on PI surface at 30 min. and then oblique LPUV is secondly irradiated on PI surfaces rotated by $90^{\circ}$. The pretilt angle of NLC is generated about $2.5^{\circ}$ with oblique angle of $60^{\circ}$ and then decreased with increasing the oblique angle of IN light irradiation. It is considered that the pretilt angle of NLC is attributed to the photo-depolymerization of polymer with the oblique angle of UV light. The voltage-transmittance and response time characteristics of photo-aligned twisted nematic (TN)-LCD with UV light irradiation time of 60 min. were almost same in comparison with rubbing treated TN-LCD.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.277-277
• /
• 2012

PCDTBT (Poly[N-9''-hepta-decanyl-2,7-carbazole-alt-5,5-(4',7'-di-2-thienyl-2',1',3'-benzothiadiazole)]) is an attractive material as a semiconducting polymer for organic thin film transistor (OTFT) and organic solar cell (OSC). High power conversion efficiency (~6%) under simulated AM 1.5G solar illumination of bulk-heterojunction solar cell with PCDTBT and [6,6]-phenyl C60 butyric acid methyl ester (PC61BM) blend was reported. In OSC, it is known that the band alignment at the interface between donor and acceptor is critical. Therefore, we studied the interfacial electronic structures of PCDTBT and PC61BM. The polymers are deposited by electro-spray on gold and In-situ x-ray and ultraviolet photoelectron spectroscopy measurements revealed the interfacial electronic structures. We obtained the energy level alignment between two materials and the different interface formation was observed with different deposition order.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.461-462
• /
• 2006

A single-gap and single-gamma transflective liquid-crystal (LC) display using patterned vertical alignment (PVA) mode was designed. In the device, a vertical electric field drives a vertically aligned LC to tilt down to optimize polarization efficiency. Electrodes of transmissive and reflective area were patterned $22.5^{\circ}$ and $45^{\circ}$ with respect to the polarizer so that a tilt-down direction of the LC director was $22.5^{\circ}$ and $45^{\circ}$ in the reflective and transmissive regions, respectively. In the device, the cell gap was the same for both regions, and the gamma curve matched each other in both regions because tilt angle of LC director was the same according to the applied voltage. Moreover, the dark state was irrespective of the cell retardation value at normal direction, which was highly important in massive fabrications. The switching principle and electro-optic characteristics of the device are reported herein.

• Journal of Satellite, Information and Communications
• /
• v.7 no.3
• /
• pp.54-57
• /
• 2012

Nematic liquid crystal (NLC) alignment effects on SiOF layers via ion-beam (IB) irradiation for four types of incident energy were successfully studied. The effect of fluorine addition on silicon oxide film properties as a function of $SiOF_4/O_2$ gas flow ration was investigated. The SiOF thin film exhibits good chemical and the thermal stability of the SiOF thin film were sustained as function of the NLC alignment until $200^{\circ}C$ Also, the response-time characteristics of aligned LCD based on SiOF film were studied.