• Transactions on Electrical and Electronic Materials
• /
• 제8권3호
• /
• pp.135-138
• /
• 2007

In this study, we investigated the electro-optical (EO) characteristic of fringe-field switching (FFS) mode cell by the two kinds of ultraviolet (UV) alignment method on the organic thin film (polyimide: PI). The suitable organic layers for FFS cell and the aligning capabilities of nematic liquid crystal (NLC) using the in-situ photoalignment method were studied; Disclination is observed after conventional photoalignment method for 1h, and in-situ photoalignment method for 1h. Monodomain alignment of the NLC can be observed via insitu photo alignment method for 2 h and 3 h. It is considered that NLC alignment is due to photo-depolymerization of the polymer with oblique non-polarized UV irradiation on PI surface. An unstable V-T curve of UV-aligned FFS-LCD with conventional photoalignment method can be achieved. However, a stable V-T curve of UV-aligned FFS-LCD with in-situ photoalignment method (1 h), and V-T curve of UV-aligned FFS-LCD with in-situ photo alignment method was much stable comparing with that of other UV-aligned FFSLCD's. As a result, more stable EO performance of UV-aligned FFS-LCD with in-situ photoalignment method for 3h is obtained than that of the other UV-aligned FFS-LCD's.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.479-482
• /
• 2004

We report a method for simultaneous measurements of cell gap, twist angle, birefringence dispersion of liquid crystal (LC) material and alignment directions in filled reflective LC cells. The method is based on spectral measurements of the LC cell reflectivity for three orientations ($0^{\circ},45^{\circ},90^{\circ}$) of the exit polarizer and may be applied for LC cells with low and high gaps.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.446-449
• /
• 2005

The alignment property of liquid crystals on the two-easy axes substrate is investigated. The two-easy axes substrate frustrates the orientation of the LCs next to the substrate, and hence influences the birefringence of the LC cell. Experimental findings reveal that the ratio of the rubbing strengths in the different rubbing directions and the cell thickness substantially influence the birefringence of the LC cell. The surface anchoring energetic competition between the different rubbing directions contributes to the observed results.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.295-298
• /
• 2003

Reflective mode liquid crystal on silicon (LCoS) microdisplay is the major technology that can produce extremely high-resolution displays. A very large number of pixels can be packed onto the CMOS circuit with integrated drivers that can be projected to any size screen. Large size direct-view thin film transistor (TFT) LCDs becomes very difficult to make and to drive as the information content increases. However, the existing LC alignment technology for the LCoS cell fabrication is still the mechanical rubbing method, which is prone to have minor defects that are not visible normally but can be detrimental if projected to a large screen. In this paper, application of photo-alignment to LCoS fabrication is presented. The alignment is done by three-step exposure process. A MTN $90^{\circ}$ mode is chose as to evaluate the performance of this technique. The comparison with rubbing mode shows the performance of photo-alignment is comparable and even better in some aspect, such as sharper RVC curve and higher contrast ratio.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.44.1-44.1
• /
• 2010

poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) is a bacterially derived copolymer produced by fermentation. PHBV has been attractive because of its potential environmental, pharmaceutical and biomedical applications. Recently, the electrospinning technique has been used to fabricate fibrous mat for biomedical applications such as artificial blood vessel, drug release and scaffolds, because this method is simple and easy to get ultrafine polymer fibers. Depending on speed of rotation drum collector, fiber structure was different. In this work, PHBV fiber was aligned by electrospinnning machine. Furthermore, alignment of PHBV fiber mats was given angle such as $45^{\circ}$, $60^{\circ}$ and $90^{\circ}$. The morphology of each aligned PHBV fiber mat was observed by SEM technique. The mechanical property was evaluated depending on alignment angle. Especially, cell attachment ability depending on alignment of PHBV fiber mats was carried out using MG- 63 osteoblast like cells.

• 한국전기전자재료학회논문지
• /
• 제16권6호
• /
• pp.510-514
• /
• 2003

We have studied the alignment of liquid crystals (LCs) on homeotropic polymeric surface that is scanned using an atomic force microscope (AFM) tip by optical polarizing microscopy and computer simulation. The scanned areas on one substrate are 5 $\mu\textrm{m}$ ${\times}$ 5 $\mu\textrm{m}$, 10 $\mu\textrm{m}$ ${\times}$ 10 $\mu\textrm{m}$, and 20 $\mu\textrm{m}$ ${\times}$ 20 $\mu\textrm{m}$ and this substrate is assembled to another substrate coated. with homeotropic polymer. The fabricated micro-LC cell using two substrates does not show any hysteresis and disclination lines inside the nano-rubbing areas, while changing voltage up and down. This indicates that the pretilt angle exists in the areas, thereby forming a hybrid LC configuration. From the experimental and computer simulation results, we can understand that the AFM rubbing clearly changes surface status of homeotropic alignment layer and causes the pretilt angle to an initial scanning direction.

• 한국가시화정보학회지
• /
• 제14권3호
• /
• pp.38-45
• /
• 2016

Separation of particles based on different sizes, detection of pathogenic bacteria and isolation of leukocytes from whole blood are typical applications of spiral or helical microchannels. The present study focuses on developing a CD4+ T-cell counting device for monitoring HIV/AIDS patients with the aid of a helical minichannel used for a sample cartridge. For the experiment, $10{\mu}m$ sized microbeads were used for visualization with a fluorescence imaging system. Alignment of microbeads was investigated in a stationary and spinning sample cartridge filled with glycerol-water mixtures of different densities. The helical minichannel was spun using a DC motor controlled by an Arduino board with a Bluetooth shield. It was found that when the sample cartridge was made stationary, no bead alignment was achieved for a medium with density (0% and 20% glycerol) lower than that of the beads, but when it was spun at 2000-3000 rpm for 1-4 min, an alignment was obtained at the top of the channel facilitating optical detection and enumeration of those microbeads. Since an alignment of microbeads was achieved for a medium with density as that of blood plasma, the same approach can be applied for aligning and counting CD4+ T-lymphocytes in whole blood samples collected from patients.

• 폴리머
• /
• 제29권4호
• /
• pp.413-417
• /
• 2005

LCD 배향막으로 응용하기 위하여 광반응성 polyvinylcinnamate 필름 위에서 액정 분자들의 배향에 관한 연구를 수행하였다. 선편광 UV를 polyvinylcinnamate 필름에 노광하면 선택적인 광반응에 의하여 필름 내에 이방성이 형성되고, 필름 표면에 인접한 액정 분자는 고분자와 분자간 상호작용으로 고분자 배향 방향과 동일한 방향으로 늘어선다. 광배향막을 사용한 액정 셀의 열 및 빛에 대한 안정성은 배향막에 UV를 다시 노광하고 열을 가한 후 유도된 액정 배향 변화를 측정하여 조사하였다. 선편광 UV를 여러번 노광한 필름의 경우 처음 노광 방향에 관계없이 최종으로 노광한 편광 UV의 방향에 따라 액정 배향이 유도되었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.559-562
• /
• 2003

The effect of pretilt angle on viewing characteristics of an IPS cell is discussed. We calculated optical viewing angle in the IPS cell as function of pretilt angle from $0.5^{\circ}$ to $4^{\circ}$, so that we could confirm that low pretilt angle was profitable for wider viewing property. In order to verify the calculation, we made an IPS cell with very low pretilt angle by the alignment method using ion beam exposure. In the experiment, we confirmed that wider viewing characteristics can be achieved if lower pretilt angle was applied in IPS mode. And Ion beam alignment method was useful for low pretilt creation.

• 한국정보통신학회논문지
• /
• 제11권9호
• /
• pp.1724-1728
• /
• 2007

본 논문에서는 PVA(Patterned Vertical Alignment)액정 셀의 광투과율 향상을 위한 새로운 전극 구조를 제안하였다. 제안한 전극 구조의 액정 디렉터의 분포 및 광투과율 계산은 상용 시뮬레이터인 'TechWiz LCD'를 사용하였다. 광 시야각을 위한 전극구조에 의해 투과율 감소를 발생시키는 부분에 대해 연구하여 그 부분의 액정 디렉터 분포를 변화시킬 수 있는 구조를 제안하였다. 그리고 기존 PVA모드와 제안한 구조를 사용한 PVA모드의 광투과율을 계산하여 비교하였다. 그 결과로부터 제안한 PVA액정 셀의 광투과율이 높아짐을 확인할 수 있었다.