• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.963-966
• /
• 2001

The wideband DS-CDMA (W-CDMA) system is one of the candidates for the next generation mobile communication system known as IMT-2000. The important concept of W-CDMA is the introduction of intercell asynchronous operation. In this paper, we design and analyze the system level simulator for the International Mobile Tele communication - 2000 (IMT-2000) 3-rd generation partnership project (3GPP) system. We confirm how the simulator works by BER over different Eb/NO. This study will be expected to use as reference data in the development of asynchronous IMT-2000. In this paper, we analyze a physical layer of W-CDMA system and design a transmitter and receiver by using ADS (Advanced Design System). Also, we simulated a link level performance in Rayleigh fading channel environment. This study will be useful in the analysis and design of W-CDMA system.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.8
• /
• pp.498-500
• /
• 2005

In a CDMA system, the capacity is variable and mainly depends on multiple access interference. The multiple access interference has a deep relationship with transmitted or received power The capacity of CDMA2000 1x system is considered to be limited by the forward link capacity Different rate data traffic requires different transmitted power and rate controlling enables the system utilize radio resource more efficiently. A very simple rate control algorithm for data calls in CDMA2000 1x system is proposed. In the proposed algorithm, by monitoring the total transmit power, we can simply adjust data rate to channel conditions and efficiently use radio resources. The proposed algorithm is easy to implement in power controlled CDMA systems.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.08a
• /
• pp.61-64
• /
• 2000

본 논문에서는 cdma2000 규격을 채용한 역방향 링크 동기식 DS-CDMA 시스템을 시뮬레이션 하여 시스템의 성능을 분석하려다 cdma2000 시스템은 기존의 IS-95와는 달리 Pilot 채널을 이용하여 페이딩 채널을 추정하고 이를 이용하여 채널 환경에 의한 수신신호의 위상변화를 보상해 준다. 채널 추정필이 31pcg 심볼에서 Pilot 채널과 Traffic 채널의 최적의 전력비를 구하였다. 또한 시스템에 Power Control을 적용하여 Target FER을 만족시키기 위한 required Eb/No를 구하였고, 서로 다른 데이터율의 사용자가 동시에 전송할 때의 성능을 분석하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.9B
• /
• pp.1579-1587
• /
• 2000

This paper presents the properties of the RF part in the receiving system based in IMT-2000 terminal technology. It mainly discuss the RF parameter performance of the receiving system for mobile telecommunication comparable to IS-98A and J-STD-018 specifications of commercially available CDMA and PCS, and is to anticipate the processing gain of the IMT-2000 receiving system, processing gain according to data processing rate, and terminal noise figure according to processing gain, relationship between noise figures according to Eb/Nt, Ioc. It is performed by such analysis method as CDMA and PCS receiving systems. Transmission bandwidth is n$\times$1.25 MHz(n=1, 3, 6, 9, 12) which is recommended by Qualcomm and NTT, the leading company in cdma 2000. Data transmission rate of IMT-2000 is classified into three cases as in moving vehicle environment of 144Kbps, outdoor pedestrian environment of 384Kbps, and indoor office environment of 2Mbps

• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.283-286
• /
• 2003

This paper presents a novel signal processing method for optimal beamforming of smart antenna system in cdma2000 1X mobile communication environments. This method utilizes characteristics of the reverse pilot channel of cdma2000 1X mobile communication systems, and applies them to improve the performance of an adaptive algorithm, which is used to a smart antenna system for beamforming.

• Journal of the Institute of Convergence Signal Processing
• /
• v.2 no.2
• /
• pp.55-61
• /
• 2001

In this paper, a synchronous reverse link DS-CDMA system with cdma2000 standard is simulated to analyze performance of system and to find the optimum power ratio between pilot channel and traffic channel. In the cdma2000 the pilot channel is used to estimate fading channel, in contract to IS-95 and it compensates phase variation of received signal due to channel environment. When the length of channel estimation is 31pcg symbols, we can find the optimum power ratio of pilot channel to traffic channel. And also we find Eb/No satisfying target FER when the power control is applied and analyze performance of system with multiuser transmission.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.1 no.1
• /
• pp.70-80
• /
• 2006

The large portion of communication service areas move from a legacy wire-line voice service to mobile data service. For the purpose of satisfaction on market need, many communication systems should be installed and upgraded based on a mobile wide-band transmission facility. Recently, large part of communication service is based on internet protocol by packet switch techniques and required new technologies such as multimedia processing, QoS achievement, and mobility managememobile communication network such as IS-95A/B and CDMA2000-1X. In this paper, I analyzed the network architecture and service provision methods. in CDMA2000-1X nt. In korea, a CDMA communication technique is standardized for digital mobile communication systems. By using the analysed results, I will extract an efficient method for network evolution and a core technique for next generation mobile communication network.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.04a
• /
• pp.520-522
• /
• 2004

본 논문은 CDMA2000 1x 망에서 이동단말 측의 측정정보와 TCP 동작 수정을 통하여 TCP 윈도우 크기를 제한하고 RTT(Round Trip Time)을 일정 수준으로 안정화시키는 방안을 제시한다. CDMA2000 1x망은 망 구성의 특성으로 인하여 큰 RTT 값을 가지면 변화가 큰 전송률을 제공한다. TCP는 이러한 CDMA2000망에서 지나치게 큰 전송 윈도우로 인하여 변동이 큰 RTT를 보이며 베이스 스테이션의 버퍼링 부하를 증가시킨다. 본 논문에서는 CDMA2000 1x망에서 사용되는 PPP프로토콜을 이용하여 무선 최대 전송률을 측정하고, TCP timestamp option을 이용하여 RTT를 측정하는 방안을 제시한다. 또한 이 측정값을 적용하여 TCP 수신측에서 RTT와 베이스 스테이션의 버퍼링을 일정수준으로 유지시키는 방안을 제시하고, 리눅스 프로토콜스택 수정을 통해 적용 결과를 보인다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.222-225
• /
• 2000

In this paper, a synchronous CDMA system accepted for the cdma2000 standard is simulated to propose optimized reverse link power ratio and channel estimation lengths. Differently from IS-95, the pilot channel is used in the proposed system to estimate fading channel, so optimized estimation lengths are needed. Therefore, in this paper we analyze optimized estimation lengths which is needed to decide the power ratio of pilot channel and fundamental channel. From fixed estimation lengths, we calculate FER with various power ratio values.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10c
• /
• pp.121-123
• /
• 2001

최근 이동 통신의 급격한 성장으로 인하여 동일한 통신 서비스간의 간섭 뿐 아니라 서로 다른 서비스간의 간섭 문제가 통신 서비스의 품질을 저하시키는 주된 요인으로 작용하고 있다. 특히, CDMA-based 시스템은 간섭에 의해 용량이 제한되므로 CDMA-based 시스템인 기존의 IS-95 및 PCS 서비스, 그리고 차세대 이동 통신인 IMT-2000/CDMA 시스템의 용량 개선을 위한 연구 및 효율적인 무선망 설계를 위한 연구가 필요하다. 본 연구에서는 IMT-2000/CDMA 시스템의 효율적인 링크 분석(Link Analysis)을 하는데 필요한 시스템 성능 평가와 시스템 통화용량을 산출하는 프로그램을 개발하고자 한다. 여기서, 시스템 성능을 예측하기 위해서는 신호 대 잡음 전력비 (E$_{b}$N$_{o}$ )의 개념이 요구된다. 시스템 통화용량은 잡음 특성이 매우 이상적인 상태를 기준으로 하여 역방향 최대 용량을 산정하는 Pole Capacity 산출 방식과 호차단율(B1ocking Probability)로부터의 통계적 산출 방법인 Erlang Capacity 산출 방식을 적용한다.