• 대한음성학회지:말소리
• /
• 제53호
• /
• pp.17-35
• /
• 2005

A New Method of Extracting the Filter Characteristics of the Nasal Cavity Using Homorganic Nasal-Stop Sequences: A Preliminary R eportHansang ParkThis study provides a new method of extracting the filter characteristics of the nasal cavity. Korean lenis stops are realized as voiced in the homorganic nasal-lenis stop sequences between vowels. Since the only difference between the two members of the homorganic nasal- lenis stop sequences, such as [mb], [nd], and [ g], is whether the passage to the nasal cavity is open or not, the subtraction of the LPC spectrum of the voiced stop from that of the preceding nasal leads to the filter characteristics of the nasal cavity of an individual speaker regardless of place of articulation. The results suggest that various attempts should be made to extract a robust filter characteristics of the nasal cavity by giving variation to LPC coefficients and by paying particular attention to speech samples. This study is significant in that it provides a preliminary report about a new method of extracting the filter characteristics of the nasal cavity.

• 한국산학기술학회논문지
• /
• 제4권3호
• /
• pp.164-167
• /
• 2003

본 연구에서는 무선부품의 일종인 cavity filter금형을 제작하여 도금용 ABS 수지와 PC/ABS alloy 수지를 사용하여 일반사출성형과 금형온도가 높은 MmSH방식, 두 타입으로 성형품을 제작하였다. 성형품의 수축률 변화는 MmSH 방식일 때 ABS 성형품의 단위캐비티 격막부분에서 수축률이 감소되었다. 중량변화는 ABS와 PC/ABS 성형품 모두 MmSH 방식일 때 증가하였고, 성형품 표면 거칠기는 MmSH 방식일 때 모두 거칠기가 감소되었다.

• 천문학회보
• /
• 제46권1호
• /
• pp.37.3-38
• /
• 2021

Radiation pressure noise of photon and photon shot noise are quantum noise limitation in interferometric gravita-tional wave detectors. Since relationship between the two noises is position and momentum of the Heisenberg uncertainty principle, quantum non-demolition (QND) technique is required to reduce the two noises at the same time. Frequency dependent squeezing using a filter cavity is one of realistic solutions for QND measurement and experimental results show that its cutting-edge performance is sufficient to apply to the current gravitational wave detectors. A 300m filter cavity is under construction at adv-LIGO. KAGRA (gravitational wave detector in Japan) has also started international collaboration to build a filter cavity. Recently we joined the filter cavity project for KAGRA. Current status of squeezing and filter cavity research at KASI and details of the KAGRA filter cavity project will be presented.

• Journal of electromagnetic engineering and science
• /
• 제2권2호
• /
• pp.100-104
• /
• 2002

A proper equivalent circuit model for coupling iris has been derived in order to compensate the length of cavity in a $TE_{011}$TEX> mode cylindrical cavity filter. A method to resolve the difference in bandwidth and feature or ripple systematically has been proposed. This method can be applied to other types of waveguide cavity filter.

• 한국인터넷방송통신학회논문지
• /
• 제12권1호
• /
• pp.173-179
• /
• 2012

본 연구에서는 국내 T-DMB 시스템에서 대역통과필터 기능을 수행 하는 cavity 필터를 설계하고자 HFSS 툴을 사용하여 그 특성을 시뮬레이션 하였으며, 이를 활용하여 필터를 제작하여 측정한 특성을 시뮬레이션 결과와 비교하였다. 전자계 3D 시뮬레이션 Tool인 HFSS를 사용하여 cavity 필터를 시뮬레이션 하는 것은, 실제로 필터를 제작하기 전에 성능을 미리 점검함으로서 최적화된 모델을 구축하여 시간과 비용을 최대한 절약할 수 있도록 하는 것이다. 원통형 도파관의 특성을 파악하여 필터의 최적의 조건들을 얻도록 연구하였으며, 이를 바탕으로 HFSS 시뮬레이션 및 제작을 하여 특성을 측정하여 설계값과 비교하였다.

• 한국인터넷방송통신학회논문지
• /
• 제11권6호
• /
• pp.157-162
• /
• 2011

본 연구에서는 국내 T-DMB 방송 송신기 및 중계기에서 사용하는 공동여파기를 설계하고 제작한다. 설계를 위하여 3차원 field 시뮬레이션 툴인 HFSS를 이용한다. T-DMB 여파기는 Q값이 높아야 하고 대전력인 이유로 공동여파기가 주로 사용되고 있다. 본 연구에서는 공동공진기의 설계를 보다 쉽고 정확한 특성을 얻기 위하여 HFSS를 이용한다. 시뮬레이션된 특성을 바탕으로 여파기를 제작하고 특성을 측정하여 시뮬레이션 결과와 비교한다. 측정한 결과 공진주파수 211.8MHz에서 대역폭 0.1MHz의 특성을 얻음으로써 시뮬레이션 결과와 설계치에 잘 부합되었음을 밝힌다.

• 한국ITS학회 논문지
• /
• 제10권6호
• /
• pp.91-97
• /
• 2011

본 연구에서는 국내 T-DMB 방송 송신기 및 중계기에서 사용하는 공동여파기를 설계하고 제작한다. 설계를 위하여 3차원 field 시뮬레이션 툴인 HFSS를 이용한다. T-DMB 여파기는 Q값이 높아야 하고 대전력인 이유로 공동여파기가 주로 사용되고 있다. 본 연구에서는 공동공진기의 설계를 보다 쉽고 정확한 특성을 얻기 위하여 HFSS를 이용한다. 시뮬레이션된 특성을 바탕으로 여파기를 제작하고 특성을 측정하여 시뮬레이션 결과와 비교한다. 측정한 결과 공진주파수 211.8MHz에서 대역폭 0.1MHz의 특성을 얻음으로써 시뮬레이션 결과와 설계치에 잘 부합되었음을 밝힌다.

• ETRI Journal
• /
• 제25권2호
• /
• pp.133-139
• /
• 2003

We studied how the passive intermodulation (PIM) power arising in air cavity filters could be calculated and how the design of the filter could be optimized in order to reduce the amplitude of the PIM signal. To do this, using simulated results, we optimized the various parameters of a filter. PIM in an air cavity filter depends on the power dissipated in its cavities. A reduction of this power loss therefore decreases the PIM power in the air cavity filter. Our experimental results confirm that it is possible to design and produce air cavity filters that generate low PIM signals.

• 한국정보전자통신기술학회논문지
• /
• 제9권6호
• /
• pp.630-636
• /
• 2016

In this paper, a novel triple-mode cavity structure, designed for compactness and operating at 850 MHz, is analyzed. A cylindrical dielectric resonator is loaded into a metallic cylindrical cavity. Previous study has been focused on the analysis of the cylindrical dielectric resonator, but in this paper, the effect of the cylindrical metallic cavity has been analyzed. Enclosing the dielectric resonator inside the metallic cavity increases the resonant frequency of the dielectric resonator; however, this increases the quality factor and introduces the possibility of installing coupling screws. The principle of generation of triple-mode was investigated by parametric analysis. The generated triple-mode is TE011 mode and two orthogonally generated HEM121 modes. By adjusting the radius of the dielectric resonator, the height of the dielectric resonator, or the radius of the cylindrical metallic cavity, three modes could be coincided. However, the height of the metallic cavity keeps three modes separated. The mode characteristics of the proposed cavity are analyzed using a full-wave electromagnetic (EM) simulation. The proposed triple-mode cavity could be developed to triple-mode filter using a coupling screw, and the commercial application for the miniaturized filter below 1 GHz could be expected.

• 한국통신학회논문지
• /
• 제22권6호
• /
• pp.1251-1258
• /
• 1997

Generally, it is very important to study selective coupling between cavities of the filter structure using multimode cavity resonator. In this paper, we have manufactured 5-pole bandpass filter(BPF) using dual and triple-mode cavity resonator. To do so, we have derived the formulas for coupling coefficient about coupling between TE-modes from TM/TE-mode's tangential and lognitudinal field intensities each other. To implement the Chebyshev response, the intercabity slot combining dual-mode and triple-mode is designed to couple one H-field of TE-mode parallel to slot plate. In this paper, specially it is derived the formulas for T $E_{11p}$-mode from TE-modes, and determined after obtaining location and size of intercabity slot from the equation. In this ppaer, based on this result, we designed and implmented teh bandpass filter operated at the center frequency of 14.5GHz with a Chebyshev response. For the manufactured cavity filter, dual-mode and triple-mode cavity are resonted by two orthogonal T $E_{113}$-modes, and by two orthogonal T $E_{113}$-modes and one T $M_{012}$-mode, respecitively. The 2-stage 5-pole BPF proposed in this paper has the insertion loss of -2.32dB, the reflection loss of -15dB in the passband, and the out-or-rejection of -67dB.