• Physical Therapy Rehabilitation Science
• /
• 제4권2호
• /
• pp.103-107
• /
• 2015

Objective: Pelvic floor muscles (PFMs) form the base of the abdomino-pelvic cavity and also the PFMs function is important for urinary continence. PFMs training (PFMT) is considered to be the first method for PFM dysfunction. This study demonstrated correct PFMs contraction among commonly used different contraction methods for PFMT. Design: Cross-sectional study. Methods: In this study, nineteen middle-aged (40-70 years) women participated. To evaluate PFM function, ultrasonography was used to measure the distance of the bladder base movement. The distance of the PFM movements were calculated at rest and during the other contractions. The following four different contraction methods were performed randomly: (1) PFM contraction, (2) abdominal drawing-in maneuver (ADIM), (3) anal contraction, and (4) hip adductor muscle contraction. The participants held the contraction for 3 seconds for a total of 3 times with a 30 seconds rest period between each trial. The mean of three measurements in each position were obtained and compared with that in the resting position. Results: The bladder base movement values were significantly greater when comparing PFM with ADIM and hip adductor contractions (p<0.05). The bladder base movement values were significantly greater when comparing ADIM and anal contractions with hip adductor contractions (p<0.05). Conclusions: The results of this study suggest that performing PFM contractions is the best method among the common methods for PFMT. Performing PFM contractions was more effective than the other contraction methods.

• 한국전기전자재료학회논문지
• /
• 제14권7호
• /
• pp.578-583
• /
• 2001

The bushing for high voltage and large and power should endure weight of itself and force of pushing from contact with circuit breaker. Like this, epoxy mold bushing has to be strong without fault. However, the external circumstances and internal factors was caused by partial discharge, flashover and dielectric breakdown. Therefore, to remove external factor of defect and to prevent the internal cracks and cavity generated from the contraction on interface of Cu-Epoxy, we should form semi-conductive layer on Cu bar by carbon. Then, the PD properties and the insulation qualities of epoxy mold type bushing was able to improved by roles of cushions for the direction of diameter and by effects fo natural sliding like as separated from conductor for the direction of length. So, in this work, we could prove the method of semi-conductive layer in making the long conductor.

• Wind and Structures
• /
• 제9권4호
• /
• pp.315-330
• /
• 2006

Flow and scalar dispersion around Cheomseongdae are numerically investigated using a three-dimensional computational fluid dynamics (CFD) model with the renormalization group (RNG) $k-{\varepsilon}$ turbulence closure scheme. Cheomseongdae is an ancient astronomical observatory in Gyeongju, Korea, and is chosen as a model obstacle because of its unique shape, that is, a cylinder-shaped architectural structure with its radius varying with height. An interesting feature found is a mid-height saddle point behind Cheomseongdae. Different obstacle shapes and corresponding flow convergences help to explain the presence of the saddle point. The predicted size of recirculation zone formed behind Cheomseongdae increases with increasing ambient wind speed and decreases with increasing ambient turbulence intensity. The relative roles of inertial and eddy forces in producing cavity flow zones around an obstacle are conceptually presented. An increase in inertial force promotes flow separation. Consequently, cavity flow zones around the obstacle expand and flow reattachment occurs farther downwind. An increase in eddy force weakens flow separation by mixing momentum there. This results in the contraction of cavity flow zones and flow reattachment occurs less far downwind. An increase in ambient wind speed lowers predicted scalar concentration. An increase in ambient turbulence intensity lowers predicted maximum scalar concentration and acts to distribute scalars evenly.

• 생약학회지
• /
• 제21권2호
• /
• pp.163-172
• /
• 1990

These studies were conducted to investigate the effects of Tongkwan-San water extract on analgesic, sedatative, anti-inflammatory, blood pressure and vasodilating actions, the relaxing action of isolated ileums and actions on the contact dermatitis induced by picryl chloride and on the leakage of the dye into the peritoneal cavity. The results of these studies were summarized as follows: The analgesic effect of Tongkwan-San was noted. The prolongation of anesthetic time of Tongkwan-San was recognized. Spontaneous motilities of isolated ileum of mice were strongly suppressed by Tongkwan-San. It inhibited the contractions of isolated ileum of mice induced by acetylcholine and barium chloride and the contraction of isolated ileum of guinea-pig induced by histamine. Inhibition of the contact dermatitis induced by picryl chloride was recognized. Anti-inflammatory effects in the paw edema induced by histamine and dextran were significantly shown. The leakage of dye into the peritoneal cavity in mice was significantly inhibited. Hypotensive and vasodilating action due to vascular smooth muscle relaxation were noted in rats and rabbits.

• 대한의용생체공학회:의공학회지
• /
• 제19권4호
• /
• pp.423-429
• /
• 1998

인두는 구강과 위장, 비강과 폐의 중간에서 능동적으로 구강을 통해 섭취되는 음식물과 비강을 통해 흡입되는 공기의 통로역할을 하는 주요한 기관이다. 본 연구는 유한요소기법을 이용한 인두의 3차원 구조의 재구성 과정을 거쳐 인두의 생체역학모델을 구현하여 각단면에서의 단면적을 유한요소모델의 시뮬레이션 결과에 의한 변위를 이용하여 산출하여 최적화 과정을 거쳐 인두의 기능시 내부에 생성되는 압력의 연속적인 압력분포를 추정할 수 있었다. 즉 인두내의압력에 대한 형상의 변형을 관찰하여 각 단면에서의 단면적을 산출하고 이를 실제의 CT영상자료와 비교하여 최적화 고장을 거쳐 각 부분에서의 추정 압력구배를 구하였다. 모델 시뮬레이션 결과 추정된 압력구배는 10-55 mmHg범위에 분포되어 있으며 전체 인두부 가운데 상부의 4레벨의 압력분포는 아부의 그것과 다른 형태를 보이는 것으로 나타났다. 이러한 인두의 생체역학모델은 인두기능장애를 가진 환자군에 적용하여 비교 분석할 경우 임상자료로서 유용할 것으로 사료된다.

• 대한두개안면성형외과학회지
• /
• 제18권2호
• /
• pp.82-88
• /
• 2017

Background: Turbinate hypertrophy is one of the common causes of chronic nasal obstruction. In principle, therapeutic guidelines recommend medical treatment. Failure to treat turbinate thickening despite drug therapy may indicate the need for surgery. The main aim of this study was to determine the effect of radiofrequency surgery, among various other surgical procedures, on people with both nasal septal deviation and turbinate hypertrophy. Methods: Among people with nasal deviation who visited the subject hospital between July 2008 to July 2014, 21 people with nasal septal deviation and severe turbinate hypertrophy before their surgery had undergone septoplasty with turbinoplasty using radiofrequency combined with septoplasty. The degree of the turbinate's hypertrophy was appraised in all the patients before and after the surgery using the rhinoscopy, and acoustic rhinometry was objectively carried out. The subjective effect of the turbinoplasty using radiofrequency was explored through the visual analog scale (VAS) score. Results: The degree of contraction of the nasal mucosa after the rhinoscopy changed from Grades 3 and 4 (100%) to Grades 1 and 2 (95.2%) and Grades 3 (4.8%). The minimal cross-sectional area significantly increased from $0.44{\pm}0.07$ to $0.70{\pm}0.07cm^2$ (p<0.05). The nasal cavity volume increased from $4.79{\pm}0.49$ to $6.76{\pm}0.55cm^2$ (p<0.05). The subjective symptoms evaluated with VAS score a year after the surgery significantly improved (p<0.05). Conclusion: Turbinoplasty using Coblator with septoplasty is an effective treatment method because it expands nasal cavity, has a low incidence of complications, subjectively improves symptoms, and has short treatment duration.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.9-12
• /
• 2000

Insulators for high-voltage and large-power should be endured mechanically the weight of mold bushing itself and the force of pushed from contact with circuit breaker and conductor. But dielectric breakdown could be occurred result from the external circumstances and internal factors such as chemical reaction, partial discharge, change of temperature and the relation of temperature-time in process of casting. Therefore, to get rid of external and internal factors of dielectric breakdown. Furthermore, to prevent the internal cracks, void, cavity which resulted from the contraction originated on the interface between copper and epoxy resin, formed semi-conductive layer with partially carbon painted on copper bar. The PD properties and the insulation qualities of epoxy molded insulators were improved by roles of cushions for the direction of diameter and natural sliding effects as like separated from conductor for the direction of length.

• 한국주조공학회지
• /
• 제2권2호
• /
• pp.18-30
• /
• 1982

For the purpose of improving the casting yields of ductile iron castings, the casting conditions for riserlese design were investigated with 150mm cube. As the important casting conditions, chemical composition, pouring temperature, mold rigidity and cooling rate were confirmed. 1. We could obtain the sound castings with the hypereutectic ductile iron. 2. In order to reduce liquid contraction, the pouring temperature should be low as much as possible 3. We could obtain the sound castings through using the rigid mold without mold cavity deformation 4. The modulus of the castings should be 2.5cm one or larger.

• 대한기계학회논문집A
• /
• 제35권2호
• /
• pp.169-174
• /
• 2011

제 1 급 와동이 모사된 비관통형 치아 시편에 수복된 복합레진의 중합 수축시 발생하는 AE 신호를 실시간으로 검출한 후 이를 분석하였다. 시간대별 발생 분포를 살펴보면, 광조사 초기에 중합 수축이 급격히 진행되는 제 I 구간에서 AE event 가 많이 관찰되었다. 제 I구간 후 AE event 발생 빈도가 낮아져 AE 가 별로 관찰되지 않은 제II구간이 있었는데, AE 신호의 발생이 적은 PMMA 는 치아에 비해 구간이 길었으며 AE 검출이 잦았던 스테인리스스틸 모형은 제 II 구간이 짧았다. AE 활성도를 나타내는 구간 특성은 수복재와 와동의 계면부에서 일어나는 균열의 발생빈도를 나타내는 것으로 사료되며 젤화점 직후의 제I 구간에서 AE 가 집중적으로 관측되는 바, 수복재와 와동 사이의 갭 형성은 바로 젤화점 직후에 만들어졌음을 가리킨다. 신호의 최대 진폭은 25-45dB 이었고 1 차 중심 주파수는 100-200kHz 와 240-400kHz 영역의 신호들이 발생하였으며 이는 레진이나 접착층의 파괴에 해당하였다.

• 대한치과의사협회지
• /
• 제57권3호
• /
• pp.162-168
• /
• 2019

Composite resin restorations in posterior teeth are increasing due to the aesthetic needs of patients and the development of materials. This trend will accelerate in line with domestic insurance policies. However, resin composites generate stresses due to their contraction during the polymerization process. To reduce the polymerization shrinkage stress of resin composites, incremental layering technique has been recommended for decades. This technique reduces stress at the cavity wall interface and allows a more efficient light curing of the material. Bulk-fill resin composites have been designed to simplify the restorative technique because they can be placed into cavities in a single increment of 4-5mm. The simplification of the operative procedures is desirable in clinical daily practice. In this context, bulk-fill resin composites are an attractive alternative for posterior restorations. However, a clearer understanding of the clinical performance of this relatively new class of materials in comparison to conventional resin composites is required. Based on previous studies, the aim of the current review was to present the clinical criteria for the use of bulk-fill composites in direct restorations of posterior teeth.