• 제목/요약/키워드: cavitation model

검색결과 328건 처리시간 0.021초

컨테이너선용 여러 가지 전타의 성능에 대한 실험적 비교연구 (An Experimental Comparison Study on Various Full-Spade Rudder Performance for Container Carrier)

  • 천장호;김문찬;이원준
    • 대한조선학회 특별논문집
    • /
    • 대한조선학회 2013년도 특별논문집
    • /
    • pp.42-46
    • /
    • 2013
  • Recently, according to the growth of demand about large container carrier, the studies for cavitation of semi-spade rudder were increased. In spite of many effort to solve, the fundamental solution can not be found. So, the studies for full-spade rudder are increasing to solve. In Pusan national university, the studies for full-spade twisted rudder and full-spade wavy twist rudder were carried out. However, most studies are carried out in numerical analysis and the many studies of experimental comparison between each rudder are not exist. This paper describe design history of full-spade rudder (twist rudder, wavy twist rudder) for KCS (KRISO Container Ship) and compare performance of each designed full-spade rudder about resistance and self-propulsion with conventional rudder (semi-spde rudder). The measurement about designed rudder's rudder force will be performed near future.

  • PDF

고압 터보펌프용 연료펌프의 수력설계 및 성능 평가 (Hydraulic Design and Performance Evaluation of a Fuel Pump for a High Pressure Turbopump System)

  • 최범석;윤의수;오형우
    • 한국유체기계학회 논문집
    • /
    • 제8권2호
    • /
    • pp.31-38
    • /
    • 2005
  • A low NPSH and high pressure fuel pump has been designed for a turbopump system. The fuel pump has an axial inducer and a centrifugal impeller. A meanline method has been established for the preliminary design and performance prediction of pumps at design or off-design points. KeRC(Kelyish Research Center) carried out a model testing of the fuel pump with water as a working fluid at the reduced speed. Predicted performances by the method are shown to be in good agreement with experimental results for cavitating and non-cavitating conditions. The established meanline method can be used for the performance prediction and preliminary design of high speed pumps which have a inducer, impeller and volute. In the current study, the three dimensional viscous flow in the fuel pump was investigated through numerical computation. A modified design of the fuel pump was generated to improve pump performance by utilizing CFD results. The modified fuel pump was experimentally tested by ROTEM and KARI(Korea Aerospace Research Institute). The measured non-cavitating and cavitating performance showed a good agreement with designed performance.

축대칭 물체 주위유동의 실험적·수치적 연구 (Experimental and Numerical Studies of the Flowfield around an Axisymmetric Body)

  • 안종우;송인행;박태선
    • 대한조선학회논문집
    • /
    • 제34권3호
    • /
    • pp.9-18
    • /
    • 1997
  • 복합추진장치가 포함된 경우와 포함되지 않은 경우의 축대칭 물체 주위 유동특성을 조사하기 위한 실험적 수치적 연구가 수행되었다. 축대칭 물체주위 유동특성 파악을 위해 선박해양공학연구센터의 캐비테이션 터널에서 표면압력분포와 LDV 장치를 이용한 주위유속분포 계측 시험이 우선적으로 이루어졌으며, 비압축성 RANS 방정식을 유한체적법으로 해석하는 수치적 방법이 표준 k-${\varepsilon}$ 난류모형을 이용하여 수행되었다. 선체와 프로펠러 상호작용은 양력면이론에 의하여 계산된 유기속도를 프로펠러 면에 분포하여 경계조건으로 처리하는 방법을 택하였다. 추진장치의 여러 가지 배열변화에 따른 실험적 결과를 기반으로 타당한 수치적 방법이 개발될 수 있다고 생각된다.

  • PDF

고압 터보펌프용 연료펌프의 수력설계 및 성능 평가 (Hydraulic Design and Performance Evaluation of a Fuel Pump for a High Pressure Turbopump System)

  • 최범석;윤의수;오형우
    • 유체기계공업학회:학술대회논문집
    • /
    • 유체기계공업학회 2004년도 유체기계 연구개발 발표회 논문집
    • /
    • pp.341-346
    • /
    • 2004
  • A low NPSH and high pressure fuel pump has been designed for a turbopump system. The fuel pump has an axial inducer and a centrifugal impeller. A meanline method has been established for the preliminary design and performance prediction of pumps at design or off-design points. KeRC carried out a model testing of the fuel pump with water as a working fluid at the reduced speed. Predicted performances by the method are shown to be in good agreement with experimental results for cavitating and non-cavitating conditions. The established meanline method can be used for the performance prediction and preliminary design of high speed pumps which have a inducer, impeller and volute. In the current study, the three dimensional viscous flow in the fuel pump was investigated through numerical computation. A modified design of the fuel pun was generated to improve pump performance by utilizing CFD results. The modified fuel pump was experimentally tested by ROTEM and KARI. The measured non-cavitating and cavitating performance showed a good agreement with designed performance.

  • PDF

연근해 어선용 표준형 추진기 개발 (A Study on Development of Standard Propellers for Coastal Fishing Vessels)

  • 이창섭;강대선;이건화;김문찬;문일성
    • 선박안전
    • /
    • 통권31호
    • /
    • pp.14-24
    • /
    • 2011
  • 최근 국제유가 상승과 탄소배출량 규제에 따른 친환경 선박의 개발 요구가 증대되고 있으며 이는 일반선 뿐만 아니라 어선에서도 마찬가지이다. 본 논문에서는 유류비 증가 및 어선의 노후화 등으로 인한 국내 어업 경쟁력의 약화 및 채산성 악화를 극복하기 위한 방안으로 연근해 어선용 추진기 개발을 위한 연구를 수행하였다. 현재 국내 어선현황에 기초하여 대표 선종인 130톤급 예망어선을 대상선으로 선정하고 추진기의 추진성능을 이론 및 실험적으로 평가 분석하였으며, 모형 시험 및 수치 해석 결과를 종합해 볼 때, 대상선의 프로펠러는 과도한 캐비테이션이 발생되는 상태에서 매운 높은 수준의 소음과 진동이 발생하는 것으로 추측된다. 이는 어선의 추진력 감소에 따른 연료비의 증대, 캐비테이션에 의한 추진기 손상, 과도하게 발생되는 소음에 따른 어획량 감소의 주된 원인이 된다. 본 연구를 통해 일반 상선의 추진성능 평가에 적용되는 최신 기술을 어선 추진기에 적용하여 모형시험 및 이론 성능 평가 과정을 정립하였으며, 이를 통해 앞으로 어선 추진기의 성능을 상당 부분 개선할 수 있음을 확인하였다.

  • PDF

분사형 초공동 수중운동체의 가스 분사량 제어 연구 (Studies on Ventilation Control for a Ventilated Supercavitating Vehicle)

  • 김선홍;김낙완
    • 대한조선학회논문집
    • /
    • 제52권3호
    • /
    • pp.206-221
    • /
    • 2015
  • Supercavitation is a modern technique which can be used to surround an underwater vehicle with a bubble in order to reduce the resistance of the vehicle. When the vehicle is at low speed in the deep sea, the cavitation number is relatively big and it is difficult to generate a cavity large enough to envelope the vehicle. In this condition, the artificial cavity, called ventilated cavity, can be used to solve this problem by supplying gas into the cavity and can maintain supercavitating condition. In this paper, a relationship between the ventilation gas supply rate and the cavity shape is determined. Based on the relationship a ventilation rate control is developed to maintain the supercavitating state. The performance of the ventilation control is verified with a depth change control. In addition, dynamics modeling for the supercavitating vehicle is performed by defining forces and moments acting on the vehicle body in contact with water. Simulation results show that the ventilation control can maintain the supercavity of an underwater vehicle at low speed in the deep sea.

선체 변동 압력에 관한 실험과 이론의 비교 연구 (A Study of a Correlation between Experiments and Calculations of Pressure Fluctuation on Hull Surface)

  • 김문찬;김기섭;송인행
    • 대한조선학회논문집
    • /
    • 제33권1호
    • /
    • pp.19-26
    • /
    • 1996
  • 프로펠러에 의한 선체변동압력을 추정하기 위해 3개의 선체에 7개의 프로펠러를 장착하여 실험과 계산치를 비교하였다. 변동압력의 계측은 KRISO의 공동터널에서 평판에 대하여 수행하였으며, 수치계산은 양력면 이론과 패널법을 사용한 수치프로그램(X-ForShip)을 사용하였다. 평판에 대한 실험값을 복잡한 선미형상에 적용하기 위하여 강체경계율(SBF)이 수정계수로 결정되었다. 실선 변동압력의 예측과 실험치의 수정을 위하여 복잡한 선미형상에서의 변동 압력을 계산하였다. 계산치와 수정된 실험치와의 좋은 일치를 보였으며, 수성계수로써 약 0.65-0.7의 값이 결정되었다.

  • PDF

초공동 수중운동체의 천이구간 특성을 고려한 동역학 모델링 및 심도제어 연구 (Study on Dynamics Modeling and Depth Control for a Supercavitating Underwater Vehicle in Transition Phase)

  • 김선홍;김낙완
    • 대한조선학회논문집
    • /
    • 제51권1호
    • /
    • pp.88-98
    • /
    • 2014
  • A supercavitation is modern technology that can be used to reduce the frictional resistance of the underwater vehicle. In the process of reaching the supercavity condition which cavity envelops whole vehicle body, a vehicle passes through transition phase from fully-wetted to supercaviting operation. During this phase of flight, unsteady hydrodynamic forces and moments are created by partial cavity. In this paper, analytical and numerical investigations into the dynamics of supercavitating vehicle in transition phase are presented. The ventilated cavity model is used to lead rapid supercavity condition, when the cavitation number is relatively high. Immersion depth of fins and body, which is decided by the cavity profile, is calculated to determine hydrodynamical effects on the body. Additionally, the frictional drag reduction associated by the downstream flow is considered. Numerical simulation for depth tracking control is performed to verify modeling quality using PID controller. Depth command is transformed to attitude control using double loop control structure.

선체로 전달되는 해수 이송 배관의 진동 저감 분석 (Analysis for Reducing Vibration Transmitted from the Sea-water Conveying Pipe to the Hull)

  • 한형석;정의봉;박경훈;홍진숙
    • 한국소음진동공학회논문집
    • /
    • 제18권11호
    • /
    • pp.1177-1184
    • /
    • 2008
  • URN(underwater radiated noise) is one of the important performances of the battle ship related to the stealth. The main source of the URN is the structure-borne noise on the hull. And the pipe vibration transmitted to the hull is the main source of the structure-borne noise when the speed of the ship is lower than CIS(cavitation inception speed). In this paper, the vibration isolator(rubber mount) for the pipe system is described in order to reduce the structure-borne noise transmitted to the hull. The vibrations on the sea-water conveying pipes and their supports are measured in order to know how much vibration occurs on those positions. Based on these test results, the improved design of the rubber mount is suggested by the parametric study and is verified numerically with the pipe and hull model.

고속콘테이너선 선형개발 (Hull From Development for a High Speed Container Ship)

  • 홍순익;김철년;공도성;양승일;강국진
    • 대한조선학회지
    • /
    • 제27권3호
    • /
    • pp.1-10
    • /
    • 1990
  • 본 논문에서는 얇은 배 이론, Hess & Smith방법, 유사실적자료 및 모형실험결과를 이용하여 고속콘테이너선의 선형을 개발한 연구결과가 소개도어 있다. 양력면이론에 의해 설계된 고효율 프로펠러는 캐비테이션과 변동압력에서 좋은 성능을 보였으며, 유한요소법에 근거한 최적설계기법으로 선체구조설계와 선체진동해석을 수행하였다. 끝으로, 새로이 개발된 본 고속콘테이너선의 성능을 실선 시운전결과와 비교, 검토하였으며, 이로부터 속력, 진동 및 기타성능에 있어서의 우월성이 확인되었다.

  • PDF