• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제29회 KOSCI SYMPOSIUM 논문집
• /
• pp.181-186
• /
• 2004

Catalytic combustion is one of the suitable methods which is applicable to micro heat source due to high energy density and no flame quenching. And hydrogen can be oxidized at room temperature with platinum catalyst. So hydrogen-fueled micro catalytic combustor with platinum catalyst can be good and easy-handling heat source for another micro devices. In this work we focused on general catalytic combustion characteristics of hydrogen-air premixed gas in 10mm scale catalytic combustor for the further application to micro scale. Platinum was coated on dense ceramic monolith which can be installed in simple-structured catalytic combustor. We investigated the effect of flow rate, heat loss and platinum percentage in catalyst-coated monolith on catalytic combustion performance by temperature distribution in the combustor. By those results we confirmed catalytic reactivity and estimated reaction area. And we simulated micro scale catalytic reaction by sliced monolith. The results of this work will be important design factors for micro scale catalytic combustor.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.989-994
• /
• 2001

Numerical simulations of high temperature catalytic combustion have been performed for the application to a gas turbine combustor. Dependences of inlet temperature and pressure on the distributions of temperature and species concentrations were investigated using plug flow model with detailed homogeneous and heterogeneous chemistries of methane-air mixtures. Honeycomb typecombustor deposited with Pt catalyst of 100mm in length and 26mm in diameter is used. The results show that rapid increase of temperature profile occurs earlier with the increase of inlet temperature and the decrease of inlet pressure. The condition which catalytic combustion is stabilized exists at certain range of inlet temperature and pressure. The state of catalytic combustion is also confirmed by the distributions of species concentration.

• 한국생물정보학회:학술대회논문집
• /
• 한국생물정보시스템생물학회 2005년도 BIOINFO 2005
• /
• pp.221-227
• /
• 2005

THEMATICS is a simple computational method for predicting functional sites in proteins. The method computes the theoretical titration curves of the ionizable residues of a protein using its 3D structure, determines the residues with perturbed, non-Henderson-Hasselbalch titration behavior, and identifies clusters of these perturbed residues in physical proximity. We have shown previously that this method is highly successful in predicting catalytic sites in enzymes. In the present study, we apply the method to non-catalytic ligand-binding proteins. It is shown that THEMATICS can predict non-catalytic binding sites. The success rate is better than 80 % for a set of 30 non-catalytic, ligand-binding proteins. The application of the method to Glutamine-binding protein from E. coli is discussed in detail.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권5호
• /
• pp.2162-2176
• /
• 2018

Chemical reactions have an intricate relationship with the search for better-quality neighborhood solutions to optimization problems. A catalytic reaction for chemical reactions provides a clue and a framework to solve complicated optimization problems. The application of a catalytic reaction reveals new information hidden in the optimization problem and provides a non-intuitive perspective. This paper proposes a new simulated catalytic reaction method for search in optimization problems. In the experiments using this method, significantly improved results are obtained in almost all graphs tested by applying to a graph bisection problem, which is a representative problem of combinatorial optimization problems.

• 대한기계학회논문집B
• /
• 제31권4호
• /
• pp.376-383
• /
• 2007

This research represents the catalytic converter for application in the motorcycle. We have to consider about catalytic converter for reducing exhaust gas strength regarding the displacement volume enlargement. The catalytic converter has been widely used to satisfy the regulations of pollutant emissions from automobiles. Recently, all catalytic converter researches are about automobile. Study about motorcycle catalytic converter has not been conducted yet. In this study, flow uniformity and pressure distribution were simulated in the monolithic inlet of catalytic converter for motorcycle. Exhaust pulsation pressure was set as transient condition about. It was found that flow uniformity shown in base model (0.85) was lower than megaphone model (0.98).

• 산업기술연구
• /
• 제43권1호
• /
• pp.33-41
• /
• 2023

This paper provides a general overview of surface catalytic recombination in hypersonic flow. The surface catalytic recombination phenomena is elaborated in terms of its general overview and numerical modeling associated with it. The general overview of the surface catalytic recombination phenomena describes the elementary surface reactions for the surface catalytic and the role of the surface catalytic recombination efficiency in the heat transfer determination. In the numerical modeling, the surface catalytic recombination is described based on the stagnation-point boundary layer analysis, and finite-rate surface reaction modeling. Throughout this overview manuscript, a general understanding of this phenomena is obtained and can be used as foundation for deeper application with the numerical computational fluid dynamics (CFD) flow solver to estimate the surface heat transfer in the hypersonic vehicles.

• 한국자동차공학회논문집
• /
• 제14권5호
• /
• pp.138-144
• /
• 2006

This research represents the catalytic converter for application in the motorcycle. Present research model type is a monolithic catalytic converter and this type has been widely used for satisfaction on and the regulations of pollutant emissions in automobiles. The experiment range is found for light-off temperature time of the catalyst converter. And we has to experiment for effective area of catalytic monolith. The experimental result indicated an increase effective area in the catalytic monolith. Specialty, it was found from the result that the more positive effect from result of thermal image camera in the megaphone model. The rate of effective area for base model was about 8.97% and megaphone model was 41.52%, 34.60%, 33.43%, 25.43% and 17.82% on the diffuser angle $4^{\circ}$ to $8^{\circ}$. Comparing with base type, megaphone type has more suitable for application to motorcycle.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1992년도 춘계 총회 및 학술발표회
• /
• pp.37-48
• /
• 1992

Functionalized organic polymers have been used as supports for heterogenized homogeneous catalytic process[1]. Sprcific advantages of using these resins as support reagents have been reviewed[2-4]. These include:

• 한국자동차공학회논문집
• /
• 제15권4호
• /
• pp.108-114
• /
• 2007

This research represents the catalytic converter for application in the motorcycle. We have to consider about catalytic converter for reducing exhaust gas strength regarding the displacement volume enlargement. The catalytic converter has been widely used to satisfy the regulations of pollutant emissions from automobiles. Recently, all catalytic converter researches are about automobile. Study about motorcycle catalytic converter has not been conducted yet. In this study, flow uniformity and pressure distribution were simulated in the monolithic inlet of catalytic converter for motorcycle. Exhaust pulsation pressure was set as transient condition about. It was found that flow uniformity shown in base model (0.85) was lower than megaphone model (0.98).

• 에너지공학
• /
• 제17권2호
• /
• pp.100-106
• /
• 2008

매트형태의 연소촉매를 사용하는 촉매연소 버너는 발생 열을 원적외선 형태로 피 가열체에 공급할 수 있기 때문에 저온 공정에서 효율적으로 열을 사용할 수 있다. 매트형태 촉매연소 버너의 활용 가능성을 높이기 위해 촉매연소버너를 제작하고 구조에 따른 연소성능에 대해 고찰하였다. 확산식 촉매연소에서는 연소면의 방향이 연소반응에 많은 영향을 주며, 촉매 주위 온도변화에 따른 산소의 확산속도 차이가 촉매 연소 반응 속도에 많은 영향을 주는 것을 알았다. 예혼합 촉매연소에서 연소공기는 이론공기량 보다 조금 많게 공급하는 것이 최적이고, 연소열의 70% 이상이 복사로 전달됨을 알았다.