• 한국재료학회지
• /
• 제32권11호
• /
• pp.496-507
• /
• 2022

For the selective catalytic reduction of NOx with ammonia (NH₃-SCR), a V₂O₅WO₃/TiO₂ (VW/nTi) catalyst was prepared using V₂O₅ and WO₃ on a nanodispersed TiO₂ (nTi) support by simple impregnation process. The nTi support was dispersed for 0~3 hrs under controlled bead-milling in ethanol. The average particle size (D₅₀) of nTi was reduced from 582 nm to 93 nm depending on the milling time. The NOx activity of these catalysts with maximum temperature shift was influenced by the dispersion of the TiO₂. For the V_0.5W₂/nTi-0h catalyst, prepared with 582 nm nTi-0h before milling, the decomposition temperature with over 94 % NOx conversion had a narrow temperature window, within the range of 365-391 ℃. Similarly, the V_0.5W₂/nTi-2h catalyst, prepared with 107 nm nTi-2h bead-milled for 2hrs, showed a broad temperature window in the range of 358~450 ℃. However, the V_0.5W₂/Ti catalyst (D₅₀ = 2.4 ㎛, aqueous, without milling) was observed at 325-385 ℃. Our results could pave the way for the production of effective NOx decomposition catalysts with a higher temperature range. This approach is also better at facilitating the dispersion on the support material. NH₃-TPD, H₂-TPR, FT-IR, and XPS were used to investigate the role of nTi in the DeNOx catalyst.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.727-730
• /
• 2009

Highly active and stable nano-sized Ni catalysts supported on MgO-$Al_2O_3$ calcined from hydrotalcite-like materials have been successfully developed with a strong metal to support interaction (SMSI) to enhance the coke resistance in combined $H_2O$ and $CO_2$ reforming of $CH_4$ (CSCRM) for syngas ($H_2$/CO=2) production. The change of the surface area and NiO crystallite size with varying the pre-calcination temperature of support and Mgo content was investigated in relation to the coke resistance. As increasing the pre-calcination temperature, the surface area decreases and the metal to support interaction becomes weak. As a consequence, the coke deposition was more severe on catalysts pre-calcined at high temperature. It was concluded that highly dispersed Ni metal in the surface of Ni/MgO-$Al_2O_3$ catalyst (MgO=30 wt%) pre-calcined at $800^{\circ}C$ had a strong metal to support interaction (SMSI) resulting in an increase of coke resistance and high activity.

• Bulletin of the Korean Chemical Society
• /
• 제34권9호
• /
• pp.2650-2656
• /
• 2013

Mesoporous alumina was synthesized using bayberry tannin (BT) as template. This novel synthesis strategy was based on a precipitation method associated with aluminum nitrate as the source of aluminum in an aqueous system. $N_2$ adsorption/desorption, XRD, SEM and TEM were used to characterize the as-prepared mesoporous alumina. The results showed that the mesoporous alumina possessed crystalline pore wall, high specific surface area, narrow pore distribution and excellent thermal stability. Moreover, the surface area and pore size of the mesoporous alumina can be tuned by changing the experimental parameters. Further, the mesoporous alumina was investigated as the support of palladium catalyst ($Pd-Al_2O_3{^*}$) for the hydrogenation of propenyl, styrene and linoleic acid. For comparison, the reference catalyst ($Pd-Al_2O_3$) prepared without barberry tannin was also employed for the catalytic hydrogenation. The experimental results showed that $Pd-Al_2O_3{^*}$ exhibited the superior catalytic performance than $Pd-Al_2O_3$ for all the investigated substrates, especially for the hydrogenation of linoleic acid with larger molecular.

• 동력기계공학회지
• /
• 제20권4호
• /
• pp.69-74
• /
• 2016

Recently, in order to meet the stricter emission regulations, the proportion of after-treatments for vehicle and vessel is increasing gradually. The purpose of this study is to investigate the de-$CH_4$ characteristics of NGOC in front of proposed combined system according to additive catalyst and support ratio. In the case of Pd addition, the de-$CH_4$ performance of 2Pt-2Pd-3MgO/$Al_2O_3$ NGOC was improved by approximately 10 to 20% for the HC components. The de-$CH_4$ performance of 2Pt-2Pd-3Cr-3MgO/$Al_2O_3$ NGOC was higher compared to five kinds of NGOC catalysts, because Cr particle was smaller and dispersion of Pd was increased. The NGOC(Zeolite:$Al_2O_3$(80%:20%)｝catalyst according to support ratio, was improved performance at low temperature region on CO and NO conversion rate.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.443-446
• /
• 2006

Carbon-supported Platinum (Pt) is the potential electro-catalyst material for anodic and cathodic reactions in fuel cell. Catalytic activity of the metal strongly depends on the particle shape, size and distribution of the metal in the porous supportive network. Conventional preparation techniques based on wet impregnation and chemical reduction of the metal precursors often do not provide adequate control of particle size and shape. We have proposed a novel route for preparing nano sized Pt colloidal particles in solution by oxidation of ethylene glycol. These Pt nano particles were deposited on large surface area carbon support. The process of nano Pt colloid formation involves the oxidation of solvent ethylene glycol to mainly glycolic acid and the presence of its anion glycolate depends on the solution pH. In the process of colloidal Pt formation glycolate actsas stabilizer for the Pt colloidal particle and prevents the agglomeration of colloidal Pt particles. These mono disperse Pt particles in carbon support are found uniformly distributed in nearly spherical shape and the size distribution was narrow for both supported and unsupported metals. The average diameter of the Pt nano particle was controlled in the range off to 3 nm by optimizing reaction parameters. Transmission electron microscopy, CV and RRDE experiments were used to compliment the results.

• 전기화학회지
• /
• 제12권3호
• /
• pp.282-286
• /
• 2009

MWNT(CNTs)를 지지체로 촉매를 합성하고 특성평가를 진행하였다. $Pt/Au/TiO_2$는 CNTs(cabon 나노 튜브) 탄소 지지체에 첨가되어 직접 메탄올 연료 전지의 성능을 개선하였다. XRD와 SEM을 통해 아나타제 $TiO_2$와 Pt/Au를 확인하였고 각각의 입자 사이즈는 200 nm와 20${\sim}$25 nm 이다. 혼성 촉매의 활성은 CV를 통해 측정되었으며 제조된 촉매는 연료전지 이용에 유망하다.

• Journal of Electrochemical Science and Technology
• /
• 제11권3호
• /
• pp.220-237
• /
• 2020

Modern electrochemical energy devices involve generation and reduction of fuel gases through electrochemical reactions of water splitting, alcohol oxidation, oxygen reduction, etc. Initially, these processes were executed in the presence of noble metal-based catalyst that showed low overpotential and high current density. However, its high cost, unavailability, corrosion and related toxicity limited its application. The search for alternative with high stability, durability, and efficiency led scientists towards carbon nanoparticles supported catalysts which has high surface area, good electrical conductivity, tunable morphology, low cost, ease of synthesis and stability. Carbon nanoparticles are classified into two groups based on morphology, one and zero dimensional particles. Carbon nanoparticles at zero dimension, denoted as carbon dots, are less used carbon support compared to other forms. However, recently carbon dots with improved electronic properties have become popular as catalyst as well as catalyst support. This review focused on the recent advances in electrocatalytic activities of carbon dots. The mechanisms of common electrocatalytic reactions and the role of the catalysts are also discussed. The review also proposed future developments and other research directions to overcome current limitations.

• Corrosion Science and Technology
• /
• 제21권5호
• /
• pp.412-417
• /
• 2022

Proton exchange membrane fuel cells (PEMFCs) provide zero emission power sources for electric vehicles and portable electronic devices. Although significant progresses for the widespread application of electrochemical energy technology have been achieved, some drawbacks such as catalytic activity, durability, and high cost of catalysts still remain. Pt-based catalysts are regarded as the most efficient catalysts for sluggish kinetics of oxygen reduction reaction (ORR). However, their prohibitive cost limits the commercialization of PEMFCs. Therefore, we proposed a NiCo@Au core shell structure as Pt-free ORR electrocatalyst in PEMFCs. NiCo alloy was synthesized as core to introduce ionization tendency and autoxidation reaction. Au as a shell was synthesized to prevent oxidation of core NiCo and increase catalytic activity for ORR. Herein, we report the synthesis, characterization, electrochemical properties, and PEMFCs performance of the novel NiCo@Au core-shell as a catalyst for ORR in PEMFCs application. Based on results of this study, possible mechanism for catalytic of autoxidation core@anti-oxidation shell in PEMFCs is suggested.

• 공업화학
• /
• 제32권3호
• /
• pp.326-331
• /
• 2021

본 연구에서는 황화수소를 상온에서 산화시키기 위한 TiO₂ 기반 바나듐계 촉매의 제조 조건을 최적화하였다. 촉매의 지지체로써 4종의 상용 TiO₂를 선정하였으며, 함침법을 이용하여 제조된 다양한 바나듐 함량별 V/TiO₂의 황화수소 상온 산화 성능 평가를 수행하였다. 선정된 TiO₂ 중 TiO₂(A)를 기반으로 하며 바나듐(V) 함량이 5%인 촉매의 황화수소 전환율이 58%로 가장 우수한 것을 확인하였으며, 촉매의 물리·화학적 특성을 비교함으로써 지지체의 비표면적과 우점하는 바나듐의 종이 촉매 성능의 주요인자임을 도출하였다. 활성이 저하된 촉매의 재생 특성을 확인하기 위해 400 ℃에서 2 h 동안 열처리하였으며, 재생된 촉매에 황이 일부 침적되어 황화수소 산화량이 10% 감소하였으나 초기 성능은 유사하게 나타나는 것을 확인하였다.

• 청정기술
• /
• 제30권2호
• /
• pp.145-156
• /
• 2024

탄소는 비표면적이 매우 크고 우수한 화학적 안정성을 지녀 촉매 지지체로 사용한 연구들이 활발히 진행되고 있다. 탄소를 지지체로 사용하는데 있어 전처리 과정은 필수적이다. 전처리를 통해 금속 입자의 성장을 제어해 안정화하고 지지체와 금속 입자 간 결합력을 향상시킬 수 있다. 본 연구에서는 표면 개질을 위해 탄소의 전처리를 실시하였으며 이를 촉매 지지체로 사용해 5 wt% Pd/C 촉매를 합성하였다. 제조된 촉매의 활성은 페놀 수소화 반응을 통해 평가되었다. 탄소 전처리 시 일반적으로 사용되는 질산과 비교하고자 유기산을 사용해 탄소 전처리를 진행하였고 이를 지지체로 사용해 촉매를 제조하였다. 글루콘산으로 처리된 촉매는 94.93%의 전환율과 92.76%의 사이클로헥사논 선택도를 나타내 질산으로 처리된 촉매보다 우수한 활성을 나타냈다. 따라서 유기산을 이용한 탄소의 전처리가 무기산 처리의 단점을 개선하는 것뿐만 아니라 촉매 성능 개선에 도움을 줄 수 있을 것으로 기대된다.