• 제목/요약/키워드: cast-in-place PC slab

검색결과 3건 처리시간 0.016초

Numerical study of stress states near construction joint in two-plate-girder bridge with cast-in-place PC slab

  • Yamaguchi, Eiki;Fukushi, Fumio;Hirayama, Naoki;Kubo, Takemi;Kubo, Yoshinobu
    • Structural Engineering and Mechanics
    • /
    • 제19권2호
    • /
    • pp.173-184
    • /
    • 2005
  • For reducing construction cost, two-plate-girder bridges are getting popular in Japan. This type of bridge employs a PC slab, which is often cast-in-place. In such a case, concrete is not usually cast over the whole slab at one time: some portions are constructed earlier than the rest. Therefore, a construction joint is inevitably created. Due to the drying shrinkage of concrete, tension stress may occur in concrete slab. High tensile stress can be expected near the construction joint where concretes with different ages meet. Moreover, prestressing is not applied over the whole length of slab at one time. This may also serve as a source of tensile stress in the slab. Thus there is a chance that cast-in-place PC slab, especially near the construction joint, may be subjected to tensile cracking. In the present study, stress states near the construction joint in the cast-in-place PC slab of a two-plate-girder bridge are investigated numerically. The finite element method is employed and the three-dimensional analysis is conducted to see the influence of dry shrinkage and prestressing. The stress states in the PC slab thus obtained are discussed. The simplified model of a plate girder for this class of analysis is also proposed.

하프 PC판과 후타설콘크리트 접합면의 면내전단강도에 관한 실험적 연구 (An Experimental Study on In-Plane Shear Strength of the Interface between Half PC Plate and Cast-in-Place Concrete Plate)

  • 신동원;고만영;이동우;김용부
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
    • /
    • pp.513-518
    • /
    • 1998
  • In Half Precast Concrete Method, such as composite slab and composite wall, Interface between half PC plate and cast-in-place concrete is occurred. And this interface endure lastly in-plane shear which is occurred by external force. Therefore, test was executed to study in-plane shear strength of interface between half PC plate and cast-in-place concrete. In this test, Experimental parameters are finishing condition of the interface, cohesion of concrete, existence and nonexistence of re-bar truss, and angle and direction of lattice of re-bar truss. Comparing and analyzing experimental results, conclusions are obtained as follows. (1) In-plane shear strength of wide interface in composite plate is more affected by the roughness of interface than re-bar truss. And cohesion of concrete contribute to increasing in-plane shear strength. Therefore it seems that the interface should be roughen and kept clean to improve in-plane shear strength. (2) It seems that shear friction equation in ACI code can be sagely available for design of in-plane shear of composite plate.

  • PDF

프리캐스트 콘크리트 트리플 리브 슬래브의 전단성능 (Shear Capacity of Precast Concrete Triple Ribs Slab)

  • 황승범;서수연;이강철;이석현
    • 콘크리트학회논문집
    • /
    • 제28권4호
    • /
    • pp.489-496
    • /
    • 2016
  • 최근, 건물의 자중을 저감시킴으로서 시공성을 향상시키기 위한 방안으로 중공 PC슬래브에 대한 관심이 높아지고 있다. 국내에서 생산되는 대표적인 중공 PC슬래브인 HCS는 생산방식 특성상 전단보강근의 배근이 어렵기 때문에 안전성 및 사용성 측면에서 문제가 제기되고 있다. 이와 같은 측면에서, 최근 새로운 형태의 부분 PC 슬래브 시스템인 Tripple Ribs Slab (TRS)가 개발되었다. TRS는 전단보강근의 배근이 가능한 하프PC형 중공슬래브이다. 본 연구에서는 TRS의 전단성능을 검토하기 위해 전단실험을 진행하였다. 시공단계별로 형성되는 단면조건에 대하여 비대칭 1점 가력으로 실험하였으며 실험결과 강도를 기준 식들과 비교하였다. 실험에서의 변수는 CIP 유무와 래티스바의 유무 또는 래티스바의 종류이다. 실험으로부터, TRS는 설계하중을 충분히 지지할 수 있는 전단성능을 가지고 있으며 실험체의 강도는 국내콘크리트구조기준에서 제시하는 일반식으로 적절하게 예측될 수 있는 것으로 나타났다. CIP가 타설되지 않은 시공단계에서는 래티스바의 기여도가 현저히 낮기 때문에 래티스바의 전단강도를 제외하고 설계하는 것이 바람직하다고 판단된다.