• 대한기계학회논문집B
• /
• 제26권3호
• /
• pp.410-416
• /
• 2002

The fluid flow, heat transfer and the local mass fraction of chemical species in the chemical vapor deposition(CVD) manufacturing process are studied numerically. Flow with a dilute precursor concentration of silane in hydrogen as the carrier gas enters to the reactor and deposits silicon onto the heated surface. The silicon deposition rate using silane is calculated in the horizontal or vertical, axisymmetric reactor. The effects of inlet carrier gas velocity, mass fraction of silane, susceptor angle and rotation of surface on the deposition rate are described.

• Transactions on Electrical and Electronic Materials
• /
• 제6권6호
• /
• pp.280-283
• /
• 2005

The moving photocarrier grating (MPG) technique for the determination of the carrier mobilities and the recombination lifetime of $\alpha$-Se:As films has been studied. The electron and hole drift mobility and the recombination lifetime of $\alpha$-Se films with arsenic (As) additions have been obtained from measurement of the short circuit current density $j_{sc}$ as a function of grating velocity and spatial period. The hole mobility decreases due to defect density of hole traps when x exceeds 0.003, whereas the hole mobility increases for the case of low As addition (x$\le$0.003). We have found an increase in hole drift mobility and recombination lifetime, especially when As with (x = 0.003) is added into the $\alpha$-Se film.

• Journal of Plant Biology
• /
• 제21권1_4호
• /
• pp.33-38
• /
• 1978

Phosphate absorption from a Na2H32PO4 solution by Oryza sativa L. was studied in order to elucidate kinetic mechanisms of ion transport. The rates of phosphate absorption from different concentraitons indicated the presence of dual mechanisms in root tips, one in the low (1$\times$10-6 to 8$\times$10-5M) and the other in the high (1$\times$10-4 to 8$\times$10-3M). A phosphate compensation point of phosphate transport was revealed with a 1$\times$10-6M solution of Na2H32PO4. The kinetic model that ion transport involves an exchange reaction of absorption and desorptin is prosposed as follows: where C represents an ionic-specific organic carrier in the membrane; M, Mo and Mi are the mineral ions, M-outside and M-inside; MC is a carrier-ion complex; and the K's represent rate constants. In this model, the Mi velocity, v, is given by: {{{{v= {dMi} over {dt}= {(K1K3Mo-K2K4Mi) Ct} over {(K2＋K3)＋K1Mo＋K4Mi} }} where Ct is equal to C＋MC, and t is time.

• 대한조선학회논문집
• /
• 제40권2호
• /
• pp.1-10
• /
• 2003

It is important to understand the flow characteristics such as wave and wake development around a ship for the design of the hull forms with better resistance and propulsive performance. The experimental results explicating the local flow characteristics are also invaluable for validation of the physical and numerical modeling of CFD codes, which are recently gaining acknowledgements as efficient tools for hull form evaluation This paper describes velocity and wave profiles measured in the towing tank for the KRISO 138K LNG Carrier (KLNG) model with propeller and rudder. The results contained in this paper can provide the valuable information on the effect of propeller and rudder on stern flow characteristics of the modern commercial hull form, furthermore, the present experimental data will provide important database for CFO validation.

• 대한전자공학회논문지
• /
• 제14권3호
• /
• pp.6-11
• /
• 1977

GaAs Schottky Barrier Gate 전계효과트랜지스터의 잡음동작을 잡음등가회로를 사용하여 연구하였으며, 부가구인 잡음근원은 pinch-off영역에서 GaAs FET bias에 의하여 구현되었다. 이것이 바로 intervalley 산란잡음과 hot electron에 의한 잡음이었다. 본 논문의 잡음등가회로에서는 carrier의 포화속도와 기생저항의 영향을 고려한 parameter를 정하였다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권4호
• /
• pp.187-191
• /
• 2004

In this work, we used the PCID simulator for simulation of solar cell and examined the effect of front-back surface recombination velocity, minority carrier diffusion length, junction depth and emitter sheet-resistance. As the effect of base thickness, the efficiency decreased by the increase in series resistance with the increase of the thickness and found decrease in efficiency by decrease of the current as the effect of the recombination. Also, as the effect of base resistivity, the efficiency increased somewhat with the decrease in resistivity, but when the resistivity exceeded certain value, the efficiency decreased as a increase in the recombination ratio. The optimum efficiency was obtained at the resistivity 0.5 $\Omega$-cm, and thickness $100\mu\textrm{m}$. We have successfully achieved 10.8% and 13.7% efficiency large area($103mm{\times}103mm$) mono-crystalline silicon solar cells without and with PECVD silicon nitride antireflection coating.

• International Journal of Aeronautical and Space Sciences
• /
• 제12권3호
• /
• pp.296-304
• /
• 2011

In order to design a shear coaxial injector of solid particles with water, basic experiments on a particle laden jet are necessary. The purpose of the present study is to understand the effect of particle loading ratio on the particle spray characteristics (i.e. spreading angle, distribution of particle number density, velocity profiles, and particle developing region length). Hydro-reactive Al2O3 particles with a primary particle diameter of 35~50 ${\mu}m$ are used in this experiment. An automated particle feeder was designed to supply constant particle mass flowrates. Air is used as the carrier gas. To determine the air velocity at the orifice exit, tracers (aluminum oxide, 0.5~2 ${\mu}m$ primary diameter) are also supplied by a tracer feeder. A plain orifice type injector with 3 mm diameter, and 20 mm length was adopted. Particle image velocimetry is used to measure the mean and fluctuating velocity components along the axial and radial directions.

• 한국항해항만학회지
• /
• 제33권2호
• /
• pp.99-104
• /
• 2009

The Kinematic GPS is well known to provide a quite good accuracy of positioning within an level. Although kinematic GPS assures high precision measurement on the basis of an appreciable distance between a reference station and an observational point, it has measurable distance restriction within 20 km from a reference station on land. Therefore, it is necessary to make out a simple and low-cost method to obtain accurate positioning information without distance restriction In this paper, the velocity integration method to get the precise velocity information of a ship is explained. The experimental results of Zig-zag maneuver and Williamson turn as the ship's maneuvering test, and other experimental results of ship's movement during leaving and entering the port with low speed were shown. From the experimental results, ship's course, speed and position are compared with those obtained by kinematic-GPS, velocity integration method and dead reckoning position using Gyro-compass and Doppler-log.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 Asia Navigation Conference
• /
• pp.49-55
• /
• 2006

Kinematic GPS provides quite good accuracy of position in cm level. Though K-GPS assures high precision measurement in cm level on the basis of an appreciable distance between a station and an observational point, but it has measurable distance restriction within 20 km from a reference station on land. So it is necessary to make out a simple and low-cost method to obtain accurate positioning information without distance restriction. In this paper, the velocity integration method to get the precise velocity information of ship is explained. Next two experimental results (Zig-zag maneuvering test and Williamson turn) as the ship's maneuvering test and also the experimental results of leaving and entering port as slow speed ship's movement were shown. In these experimental results, ship's course, speed and position are compared with those obtained by kinematic-GPS, velocity integration method and dead reckoning position using Gyro-compass and Doppler-log.

• 청정기술
• /
• 제13권2호
• /
• pp.122-126
• /
• 2007

Polyurethane, PVA(polyvinyl alcohol)와 지렁이 분변토를 혼합하여 제작한 bio-carrier를 충전한 바이오필터(biofilter)를 이용하여 $NH_3$ 악취를 제거하였다. SV(Space velocity)가 50 $h^{-1}$인 조건에서 $NH_3$ 농도를 $4\;{\sim}\;454\;ppmv$로 증가시켰을 때 출구로부터 $NH_3$가 검출되지 않았다. 또한 $NH_3$ 가스의 조건을 $50{\sim}400\;h^{-1}$로 설정하여 각각의 조건에서 $NH_3$농도를 점진적으로 증가시켜 $NH_3$ 가스의 제거효율을 알아보았다. 악취가 공급되는 조건 중 SV $50\;h^{-1}$에서 $NH_3$의 최대 유입부하량은 $11.38\;g-NH_3{\cdot}m^{-3}{\cdot}h^{-1}$로 100%의 제거효율을 나타냈으며, SV $100\;h^{-1}$에서는 $34.42\;g-NH_3{\cdot}m^{-3}{\cdot}h^{-1}$에서 100%의 제거효율을 나타냈다. SV 300 $h^{-1}$에서 $NH_3$ 최대 부하량은 $71.28\;g-NH_3{\cdot}m^{-3}{\cdot}h^{-1}$이었으며, 제거효율은 99.85%로 나타났다.