• Journal of the Semiconductor & Display Technology
• /
• v.19 no.4
• /
• pp.94-98
• /
• 2020

The core/shell of nanowires (NWs) with Cu-doped CdSe quantum dots were fabricated as an electron transport layer (ETL) for perovskite solar cells, based on ZnO/TiO2 arrays. We presented CdSe with Cu2+ dopants that were synthesized by a colloidal process. An improvement of the recombination barrier, due to shell supplementation with Cu-doped CdSe quantum dots. The enhanced cell steady state was attributable to TiO2 with Cu-doped CdSe QD supplementation. The mechanism of the recombination and electron transport in the perovskite solar cells becoming the basis of ZnO/TiO2 arrays was investigated to represent the merit of core/shell as an electron transport layer in effective devices.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.152-152
• /
• 2010

이종접합 태양전지에서 Intrinsic a-Si:H의 역할은 상당히 중요하다. Passivation 효과와 높은 Voc에 이르는 핵심적인 Layer이다. 본 연구는 Intrinsic a-Si:H Layer의 증착조건을 가변하여 최적의 Passivation 효과를 얻는데 목적이 있다. 웨이퍼는 n-Type $500\;{\mu}m$두께에를 사용하였다. Intrinsic a-Si:H Layer는 $SiH_4$ 가스와 $H_2$ 가스를 혼합하여 증착하게 되는데 혼합비는 1:5로 고정하였다. 증착두께는 이종접합 태양전지에서 필요한 5nm로 고정하였으며 증착장비는 PECVD를 이용하였다. PECVD는 VHF(60MHz)를 이용하였고 증착온도는 $200^{\circ}C$로 고정하여 진행하였다. 가변내용은 전극거리와 파워, 압력이다. 전극거리는 20mm에서 80mm까지 가변하였고 압력은 100mTorr에서 500mTorr까지 가변하였다. 파워는 플라즈마의 방정특성을 알아본 후 최소파워를 이용하여 증착하였다. 이는 증착 시 플라즈마에 의한 박막 손상을 최소화하기 위함이다. 측정은 QSSPC 방식으로 Carrier Lifetime과 Implied Voc를 측정하였으며 두께는 Ellipsometry를 이용하여 측정하였다. 전극거리 60mm에서 증착압력은 400mTorr이고 파워는 $14mW/cm^2$에서 가장 높은 Carrier Lifetime 과 Implied Voc를 나타내었다. Carrier Lifetime은 2.2ms이고 Implied Voc는 709mV를 달성 하였다. Carrier Lifetime이 높으면 Surface Recombination이 낮다는 의미이며 이는 고효율 이종접합 태양전지 제작에 있어서 직렬저항을 줄일 수 있는 필수적인 요소이다. Implied Voc는 이종접합 태양전지의 Voc에 직결된 인자로 이종접합 태양전지의 Voc를 예상할 수 있는 중요한 요소이다.

• Korean Journal of Materials Research
• /
• v.30 no.10
• /
• pp.509-514
• /
• 2020

The two key variables of an Si solar cell, i.e., emitter (n-type window layer) and base (p-type substrate) doping levels or concentrations, are studied using Medici, a 2-dimensional semiconductor device simulation tool. The substrate is p-type and 150 ㎛ thick, the pn junction is 2 ㎛ from the front surface, and the cell is lit on the front surface. The doping concentration ranges from 1 × 10¹⁰ cm^-3 to 1 × 10²⁰ cm^-3 for both emitter and base, resulting in a matrix of 11 by 11 or a total of 121 data points. With respect to increasing donor concentration (Nd) in the emitter, the open-circuit voltage (Voc) is little affected throughout, and the short-circuit current (Isc) is affected only at a very high levels of Nd, exceeding 1 × 10¹⁹ cm^-3, dropping abruptly by about 12%, i.e., from Isc = 6.05 × 10^-9 A·㎛^-1, at Nd = 1 × 10¹⁹ cm^-3 to Isc = 5.35 × 10^-9 A·㎛^-1 at Nd = 1 × 10²⁰ cm^-3, likely due to minority-carrier, or hole, recombination at the very high doping level. With respect to increasing acceptor concentration (Na) in the base, Isc is little affected throughout, but Voc increases steadily, i.e, from Voc = 0.29 V at Na = 1 × 10¹² cm^-3 to 0.69 V at Na = 1 × 10¹⁸ cm^-3. On average, with an order increase in Na, Voc increases by about 0.07 V, likely due to narrowing of the depletion layer and lowering of the carrier recombination at the pn junction. At the maximum output power (Pmax), a peak value of 3.25 × 10^-2 W·cm^-2 or 32.5 mW·cm^-2 is observed at the doping combination of Nd = 1 × 10¹⁹ cm^-3, a level at which Si is degenerate (being metal-like), and Na = 1 × 10¹⁷ cm^-3, and minimum values of near zero are observed at very low levels of Nd ≤ 1 × 10¹³ cm^-3. This wide variation in Pmax, even within a given kind of solar cell, indicates that selecting an optimal combination of donor and acceptor doping concentrations is likely most important in solar cell engineering.

• 한국태양에너지학회:학술대회논문집
• /
• 2012.03a
• /
• pp.149-152
• /
• 2012

$Cu(In,Ga)Se_2$ (CIGS) is one of the most promising photovoltaic materials because of large conversion efficiency which has been achieved with an optimum Ga/(In+Ga) composition in $CuIn_{1-x}Ga_xSe_2$ (X~0.3). The Ga/(In+Ga) content is important to determine band gap, solar cell performances and carrier behaviors at grain boundary (GB). Effects of Ga/(In+Ga) content on physical properties of the CIGS layers have been extensively studied. In previous research, it is reported that GB is not recombination center of CIGS thin-film solar cells. However, GB recombination and electron-hole pair behavior studies are still lacking, especially influence of with different X on CIGS thin-films. We obtained the GB surface potential, local current and I-V characteristic of different X (00.7 while X~0.3 showed higher potential than 100 mV on GBs. Higher potential on GBs appears positive band bending. It can decrease recombination loss because of carrier separation. Therefore, we suggest recombination and electron-hole behaviors at GBs depending on composition of X.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.7
• /
• pp.38-46
• /
• 1993

Based on the close correlation between the optoelectronic and electrical characteristics of laser diodes, this paper is to present an exact model for electrical characteristics of laser diodes with bulk active layers so that the optoelectronic characteristics may be estimated from the electrical Characteristics. Among the considered models, the most exact model is shown to be one which uses the Fermi-Dirac integral and the bimolecular recombination and takes into account the energy-gap shrinkage with the injected carrier density.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.28-31
• /
• 2003

We have investigated the electrical characteristics of the organic light emitting diodes (OLEDs) using the numerical device simulation. The current-voltage characteristics, the charge carrier concentrations, and the recombination rate profiles are presented. The simulation results of the effects of the various device parameters on the device characteristics are discussed.

• 전기의세계
• /
• v.26 no.5
• /
• pp.83-89
• /
• 1977

This paper described the minority carrier lifetime in Si epitaxial layer, and also the voltage (V) versus current (I) characteristics of high resistivity Si epitaxial layer0substrate junction. The measured lifetime in Si epi-layer was much shorter than in bulk, and the temperature dependence of lifetime was found to agree well with Shockley-Read model of recombination which applies to high resistivity n-type materials. The V-I curve showed; an ohmic region (I.var.V), a sublinear region (I.var.V$^{1}$2/), a space charge limited current region (I.var.V$^{2}$), and finally a negative resistance region. We investigated these phenomena by the theory of the relaxation semiconductor.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.43.2-43.2
• /
• 2011

Minority Carrier recombination should be suppressed for high efficiency solar cells. However, impurities in the silicon bulk region deteriorate the minority carrier lifetimes, causes conversion efficiency drop. In this study, we introduced phosphorus external gettering for silicon heterojunction solar cell substrates. Gettering was undergone at 750, 800, 850 and $900^{\circ}C$ in furnace for 30 minutes. Bulk lifetimes and calculated diffusion length were improved. We applied phosphorus gettering to silicon heterojunction solar cells. Gettered group and ungettered group were used as substrate of silicon heterojunction solar cells. After fabrication, characteristics of solar cells were analyzed. The results were observed to see the enhancement of substrate quality which directly connects with solar cell properties.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.28A no.10
• /
• pp.830-839
• /
• 1991

The correlation between electrical (derivativer) characteristics and electro-optical conversion characteristics of laser diodes has been investigated both theoretically and experimentally with emphasis on the nonideal behavior. Laser diodes are electrically pumped devices with the current resulting from the carrier recombination dynamics, and their junction voltage is given by the separation of the quasi-Fermi levels which are determined by the injected carrier concentration. Thus most of the informaiton related to laser diode operation characteristics is reveraled in the electrical characteristics which are relatively simple to measure with sufficient accuracy. Therefore the measurement of electrical characteristics and their derivatives is a very useful tool of laser diode characteristion.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.7
• /
• pp.45-55
• /
• 1997

Electircal characteristics of HgCdTe photodiodes with a heterostructure to achieve high performance are analyzed numerically. A two-dimensional device simulator which can handle a HgCdTe heterostructure, was developed for this work. The effects of band nonparabolicity, carrier degeneracy, and band-offset of heterointerace are included in a carrier transport model. A unified generation-recombination model includes simultaneously phonon-assisted tunneling and pure tunneling of carriers via traps is newly employed for describing the electric field and temperature dependency of dark current effectively. Furthermore, to accurately predict the effect mole fraction variations on genration rates, ray-trace algorithm is incorporated in the our simulator. Under the various circumstances such as dark, illumination, and surface states, electrical properties of planar heterostructure photodiode are presented and those of homojunction are compared. These results serve as a explanation of cap layer's role on performance.