• 대한통합의학회지
• /
• 제7권2호
• /
• pp.141-151
• /
• 2019

Purpose : Hypochlorous acid (HOCl), a major inorganic bactericidal compound of innate immunity, is effective against a broad range of microorganisms. In particular, HOCl is well-known as a non-antibiotic antimicrobial substance. However, effects of HOCl as an antimicrobial agent are still needed to study these functions against various specific type of microorganisms. In this study, we investigated the antimicrobial effect of hypochlorous acid (HOCl) in S. mutans and A. actinomycetemcomitans to cause dental caries and periodontal disease. Experiments were conducted to observe whether HOCl become effective replacement of disinfectant. Methods : To observe antimicrobial effect of HOCl, stabilized HOCl is prepared in the form of a physiologically balanced solution in pre-conditioned and post-conditioned HOCl solution. As a control, commercially available disinfectant MAXCLEAN was used as positive control. Moreover, S. mutans and A. actinomycetemcomitans distribution in gagrin, filtered tap water, and culture media. Cell viability were measured by viable cell count methods and disk diffusion test. Results : Our results showed that treatment of HOCl have no effect against antimicrobial effect compare to control group especially gagrin in disk diffusion test. HOCl tended to reduced viability against S. mutans in group of post-conditioned than pre-conditioned of HOCl solution however, there was no significant difference as well as no effect in A. actinomycetemcomitans. Conclusion : HOCl showed tendency to reduce viability against S. mutans in group of post-conditioned of HOCl solution and no effect of antimicrobial effect. Although HOCl is well known as effective against a broad range of microorganisms, HOCl seems to have diversity following type of species to be used as antimicrobial drug following our results. Therefore, it is necessary to be rigidly controlled and regulated in using HOCl solution clinically.

• 대한통합의학회지
• /
• 제10권4호
• /
• pp.103-111
• /
• 2022

Purpose : In recent years, essential oils have been produced using natural extracts for various uses. Their functionality is currently being tested not only for cosmetics and perfumes but also for other categories of products. Therefore, this study verified their antibacterial effects on S. mutans, P. gingivalis, and L. gasseri which are the representative strains that cause oral diseases. Methods : Eighteen types of natural essential oils were made at a concentration of 50 % (v/v) using Tween 20, and their antibacterial effects were verified by applying S. mutans, P. gingivalis, and L. gasseri. The antibacterial effects were measured with the disc diffusion method. All the experiments were repeated three times, and the mean value of three measurement values for each variable was used for data analysis. A one-way analysis of variance was conducted using these mean values. Results : Of the eighteen types of essential oils tested, sixteen types showed antibacterial effects on S. mutans, and sixteen and fifteen types exhibited antibacterial effects on P. gingivalis and L. gasseri respectively. The types of essential oils with high-level antibacterial activities were geranium, may chang, and bergamot for S. mutans, lemongrass, bergamot, and eucalyptus for P. gingivalis, and lemongrass, machan, and geranium for L. gasseri in order of antibacterial effect. This result was statistically significant (p<.001). In addition, in the case of mandarin oil, it was found that there was no antibacterial activity in all three strains. Conclusion : This study proved the antibacterial activities of essential oils, which are used for various purposes in daily life, against dental caries and periodontal diseases. The study results will likely be applied to different prevention programs for oral health and broadly used to develop products such as oral care items and dentifrices.

• Restorative Dentistry and Endodontics
• /
• 제46권1호
• /
• pp.9.1-9.9
• /
• 2021

Objectives: This randomized clinical trial aimed to assess the effectiveness of buccal infiltration with piroxicam on the anesthetic efficacy of inferior alveolar nerve block (IANB) with buccal infiltration in irreversible pulpitis, with pain assessed using the Heft-Parker visual analogue scale (HP-VAS). Materials and Methods: This study included 56 patients with irreversible pulpitis in mandibular molars, randomly distributed between 2 groups (n = 28). After evaluating the initial pain score with the HP-VAS, each patient received IANB followed by buccal infiltration of 2% lignocaine with adrenaline (1:80,000). Five minutes later, the patients in groups 1 and 2 were given buccal infiltration with 40 mg/2 mL of piroxicam or normal saline, respectively. An access opening procedure (AOP) was performed 15 minutes post-IANB once the individual showed signs of lip numbness as well as 2 negative responses to electric pulp testing. The HP-VAS was used to grade the patient's pain during caries removal (CR), AOP, and working length measurement (WLM). Successful anesthesia was identified either by the absence of pain or slight pain through CR, AOP, and WLM, with no requirement of a further anesthetic dose. A statistical analysis was done using the Shapiro-Wilk and Mann-Whitney U tests. Results: The piroxicam group presented a significantly lower (p < 0.05) mean pain score than the saline group during AOP. Conclusions: Buccal infiltration with piroxicam enhanced the efficacy of anesthesia with IANB and buccal infiltration with lignocaine in patients with irreversible pulpitis.

• 대한소아치과학회지
• /
• 제35권1호
• /
• pp.1-10
• /
• 2008

치아 우식증과 침식증의 진단과 예방에 있어 구강 내 환경, 특히 산도를 정밀하게 평가하는 것은 매우 중요한 일이다. 본 연구는 구강 내의 산도측정을 위한 기존 방법들의 단점을 보완하고자 구강 내 무선 pH 원격측정 방법을 개발하고, 실제로 측정시의 효율성을 얻기 위해 시행되었다. 구강 외로 부착되는 부가적인 장치 없이 구강 내에만 장착하여 24시간 이상 수소이온농도지수(이하 pH)를 측정할 수 있는 무선 원격측정장치를 개발하고, 정확한 산도의 측정이 가능한지를 검증하였다. 그리고 이 장치를 실제 구강 내에 장착하여 피검자로 하여금 24시간 동안의 시간별 상세한 섭식과 활동 내용, 수면 상태를 기록하도록 하고 24시간 후 구강으로부터 수거하여 지난 24시간 동안의 pH의 변화를 획득하고 분석하였다. 그 결과, 구강 내 장치와 구강 외 장치로 이루어진 구강 내 무선 pH 원격측정방법의 개발에 성공하였으며 24시간 동안 피검자의 구강 내 pH 변화를 측정한 결과, 피검자가 실제 섭취하였던 시간과 음식 종류에 일치하게 측정치를 얻을 수 있었다. 본 연구를 통하여 장시간 무선 pH 원격측정방법을 이용하여 구강 내 pH를 측정할 수 있게 됨으로써, 기존의 유선 pH 원격측정방법이 가진 한계점을 극복할 수 있게 되어 구강 내 환경이나 우식학과 관련된 보다 광범위한 연구가 가능하게 될 것이다.

• The Journal of Advanced Prosthodontics
• /
• 제2권2호
• /
• pp.33-38
• /
• 2010

PURPOSE. Marginal fit is a very important factor considering the restoration's long-term success. However, adding porcelain to copings can cause distortion and lead to an inadequate fit which exposes more luting material to the oral environment and causes secondary caries. The purpose of this study was to compare the marginal fit of 2 different all-ceramic crown systems before and after porcelain veneering. This study was also intended to verify the marginal fit of crowns originated from green machining of partially sintered blocks of zirconia (Lava CAD/CAM system) and that of crowns obtained through machining of fully sintered blocks of zirconia (Digident CAD/CAM system). MATERIALS AND METHODS. 20 crowns were made per each system and the marginal fit was evaluated through a light microscope with image processing (Accura 2000) at 50 points that were randomly selected. Each crown was measured twice: the first measurement was done after obtaining a 0.5 mm coping and the second measurement was done after porcelain veneering. The means and standard deviations were calculated and statistical inferences among the 2 groups were made using independent t-test and within the same group through paired t-test. RESULTS. The means and standard deviations of the marginal fit were $61.52{\pm}2.88{\mu}m$ for the Digident CAD/CAM zirconia ceramic crowns before porcelain veneering and $83.15{\pm}3.51{\mu}m$ after porcelain veneering. Lava CAD/CAM zirconia ceramic crowns showed means and standard deviations of $62.22{\pm}1.78{\mu}m$ before porcelain veneering and $82.03{\pm}1.85{\mu}m$ after porcelain veneering. Both groups showed significant differences when analyzing the marginal gaps before and after porcelain veneering within each group. However, no significant differences were found when comparing the marginal gaps of each group before porcelain veneering and after porcelain veneering as well. CONCLUSION. The 2 all-ceramic crown systems showed marginal gaps that were within a reported clinically acceptable range of marginal discrepancy.

• 대한치과보철학회지
• /
• 제37권2호
• /
• pp.242-255
• /
• 1999

The purpose of this study was to estimate the morphology and the size of permanent mandibular molar in Korean Adult. The 100 dental college students with a normal dentition and without any dental prosthesis and severe caries were selected for this study The subjects were taken impression to make study model. On the study model, the 5 dentists measured those sizes and estimated morphological structures with a calipers, a Boley gauge and a protractor. The results were as follows; 1. The clinical crown height, width, thickness and the other anatomical structures had symmetrical relationship between the left and right mandibular molar. 2. In the clinical crown height aspect, the buccal crown heights always were higher than the lingual crown height. The heights of the each surface, the buccal or lingual surface, were gradually decreased from the 1st molar to the 2nd molar and the difference on the buccal surface was higher than that on the lingual surface. 3. In the clinical crown width aspect, the mesiodistal measurement of the mandibular 1st molar was higher than that of the mandibular 2st molar. 4. In the clinical crown thickness aspect, the mesial buccolingual measurement was highest on the mandibular 1st molar and the distal buccolingual distance was lowest on the mandibular 2nd molar. This distal thickness of the mandibular molar always was higher than that of the mesial half. 5. The well-developed mesiobuccal groove of the 1st molar was observed more often than that of the 2nd molar. The buccal pit was also observed more frequently at the 1st molar, but the frequency(35%) was not high. 6. The occlusal type according to the number of cusp was almost 5-cusp(98%) in the 1st molar and was also 5-cusp(63%) in the 2nd molar. The frequency of the 6th cusp was 31% in the 1st molar and was 22% in the 2nd molar. The frequency of the 7th cusp was below 2of in the both teeth. 7. In the buccolingual intercuspal distance aspect of the mesial and distal half, the intercuspal distance of distal half was higher than that of the mesial half on the 1st and 2nd molar, but the difference on the 1st molar was higher than that on the 2nd molar. 8. The difference between the widths of the buccal and lingual half was 1.5mm in the 1st molar and 0.8mm in the 2nd molar. Therefore the lingual convergency of the occlusal surface was more higher in the 1st molar. 9. On the mandibular 1st and 2nd molar, the distobuccal external angle was more acute than the mesiobuccal external angle. But the mesiobuccal internal angle was more acute than the distobuccal internal angle. 10. When the mandibular molar was a 5-cusp type, the development of the distal cusp on the 1st molar was better than that on the 2nd molar. The difference between the cusps was around 0.4mm.

• Journal of Periodontal and Implant Science
• /
• 제27권4호
• /
• pp.819-828
• /
• 1997

The purpose of this study was to evaluate the abrasion-resistance of root surface after NaF iontophoresis, Nd:YAG laser irradiation and combined treatment 50 anterior teeth with flat interproximal root surface that had been extracted due to periodontal destruction were selected. All teeth were treated by the same procedure as conventional periodontal root treatment, such as scaling and root planing, root conditioning with tetracycline HCI(lOOmg/ml, 5min). The pre-treatment weight of each tooth was measured by a dial scale(SHIMADEU Co, LIBROR EB-220HU, capacity 220.000 g, Japan). All teeth were divided into 5 groups as follows: Nd:YAG laser irradiation(group 1, 1 W, 100 mJ, 10Hz, fiberoptic-root surface distance=5mm, $10\;sec.{\times}6times$, EL.EN.EN060, Italy): NaF iontophoresis(group 2, $150{\mu}A$, 4 min}: Nd:YAG laser irradiation following NaF iontophoresis(group 3): NaF iontophoresis following Nd:YAG laser irradiation(group 4): No treatment(control group). Electric toothbrushing (Oral-B, Brown Co, Germany) was conducted during 1 hour($lO\;min.{\times}6\;times$). Subsequently post-treatment weight was remeasured by the same method as pre-treatment weight measurement. The difference of abrasion rate among all groups was statistically analyzed by ANOVA(SAS program). Following results were obtained: 1. The abrasion rate was significantly lower in Nd:YAG laser irradiation group than NaF iontophoresis group(p < 0.001). 2. The abrasion rate was significantly lower in combined groups of Nd:YAG laser irradiation and NaF iontophoresis than either Nd:YAG laser irradiation group or NaF iontophoresis group(p < 0.001). 3. There was no significant difference in abrasion rate according to application order in the combined groups(p > 0.05). 4. The abrasion rate was significantly lower in all experimental groups than control group(p < 0.001). The results suggest that combined treatment of Nd:YAG laser irradiation and NaF iontophoresis on exposed root surface after periodontal therapy can enhance the abrasion-resistance of root surface and may inhibit the root caries development.

• 대한소아치과학회지
• /
• 제48권1호
• /
• pp.21-30
• /
• 2021

이 연구의 목적은 indocyanine green (ICG)과 근적외선 diode 레이저의 사용이 다종 우식원성 바이오필름에 미치는 항균 효과를 조사하는 것이다. Streptococcus mutans, Lactobacillus casei, Candida albicans를 포함하는 다종 바이오필름이 ICG와 808 nm 근적외선 diode 레이저를 사용하여 서로 다른 조사 시간에 따라 처리되었다. Colony-forming unit (CFU)을 측정하였고, 바이오필름의 정성적 평가를 위해 공초점 레이저 주사 현미경(Confocal laser scanning microscopy, CLSM) 관찰을 시행하였다. 또한 광열 치료의 효과를 평가하기 위해 온도 측정이 시행되었다. ICG와 근적외선 diode 레이저를 사용한 군에서 CFU의 감소량이 통계적으로 유의하였으나, L. casei와 C. albicans에서는 시간에 따른 항균 효과의 유의한 차이는 관찰되지 않았다. CLSM 관찰에서도 유사한 세균 감소를 확인할 수 있었다. ICG와 근적외선 diode 레이저를 사용한 군은 ICG 없이 광조사를 시행한 군보다 더 높은 온도 상승을 보였으며, 측정된 온도는 열 치료의 온도 범위와 유사하였다. 결론적으로, ICG와 근적외선 diode 레이저는 다종 우식원성 바이오필름에 항균 효과를 보였다. 우식 예방을 위한 보조 수단으로 사용될 가능성을 가지나, 임상적인 적용을 위해서는 적용 프로토콜에 관한 연구가 필요하다.

• 구강회복응용과학지
• /
• 제29권1호
• /
• pp.45-58
• /
• 2013

교합접촉 분석에 이용되는 T-Scan $III^{(R)}$ (Tekscan, South Boston, MA, USA)의 정확도 및 신뢰도를 Add picture 방법을 통해 평가하였다. 두 방법에서 공통적인 교합접촉점의 분포 및 교합접촉면적을 비교하여 교합진단 및 조정 술식에서 T-Scan 방법의 적용 시 고려점을 밝히고자 하였다. Angle I급 교합관계, 정상치열자 한 사람의 구강을 대상으로 부가중합형 실리콘인상재를 이용하여 상하악치열궁을 10회 인상채득하였으며, 10쌍의 초경석고 모형을 제작하였다. 자체제작한 하중장치에 모형을 자석과 경석고를 이용하여 부착한 후 최대감합위와 최대교합력을 재현하기 위해 78.9kg의 하중을 가하였다. T-Scan 측정 시에는 상하악 모형과 T-Scan 센서의 위치가 변하지 않는 상태에서 2번 반복 측정하였다. Add Picture의 경우 상하악모형을 동일한 하중을 가하여 최대감합위에서 폴리이써 교합인기재를 이용하여 교합을 인기하였다. 교합접촉 양상은 접촉점 수와 총 교합면적에 대한 접촉면적 백분율을 측정하여 비교하였다. T-Scan 방법은 포토샵 프로그램 상에서 픽셀수를 계산하여 색상에 따른 면적을, Add picture 방법은 빛 투과 정도에 따라 인상재 두께를 $0{\sim}10{\mu}m$, $0{\sim}30{\mu}m$, $0{\sim}60{\mu}m$의 3가지로 나누고, 이에 따른 면적을 실측하여 계산하였다. 총 교합면면적은 접촉면을 표시한 모형의 촬영상에서 픽셀수를 계산하여 함께 촬영된 격자를 기준으로 제곱미터값으로 변환하였다. 대응표본 t-검정을 이용하여 통계분석하였다. T-Scan 방법에서 분홍색상 및 붉은 색상으로 표시된 면적의 일부가 Add picture 방법에서 $0{\sim}10{\mu}m$, $0{\sim}30{\mu}m$, $0{\sim}60{\mu}m$의 상하악 치아 간 거리에 해당하는 면적에 상응하였다. 교합접촉점 분포 비교 시 T-Scan 방법과 Add picture 방법은 유사하였다. 교합접촉면적 비교 시 T-Scan 방법에서 확대된 결과가 관찰되었으며, 전체교합면적에 대한 접촉면적 백분율 비교에서도 T-Scan 방법과 Add picture 방법의 백분율값은 유의한 차이를 보였다(P<.05). T-Scan에서 분홍색상 및 붉은 색상으로 표시된 부위의 면적값은 Add picture의 $0{\sim}10{\mu}m$, $0{\sim}30{\mu}m$ 부위의 면적값보다 크고(P<.05), $0{\sim}60{\mu}m$ 부위와는 유사한 값을 보였다(P>.05). T-Scan에서의 교합접촉상은 실제보다 확대되어 나타났으며, 따라서 교합접촉에 대한 진단 및 조정 술식에서 보조적인 수단으로 활용하는 것이 추천된다.

• Restorative Dentistry and Endodontics
• /
• 제28권1호
• /
• pp.89-99
• /
• 2003

The purpose of this study was to investigate the bonding of resin- based root canal sealer, AH26 when the sealer was applied as a thin layer between dentine and gutta-percha surface. In this study forty non-caries extracted human molars and resin-based root canal sealer(AH 26, DeTrey/Dentsply, Germany) were used. Disks of gutta-percha, 6mm in diameter.6mm thick (Diadent/Dentsply, Korea) for thermoplastic obturation were used and dentin surfaces were treated with 2% NaOCl(Group 1) or 2%NaOCl+17% EDTA(Group 3). Disks of gutta-Percha, 6mm in diameter.6mm thick (Diadent/Dentsply, Korea) for conventional obturation were used and dentin surface were treated with 2% NaOCl(Group 2) or 2%NaOCl+17% EDTA(Group 4). Enamel was removed by a horizontal section 1mm below the deepest portion of the central occlusal groove by using a watercooled low speed diamond saw. A second horizontal section was done around cementoenamel junction. Exposed dentin surface was cut to approximately $8{\times}8{\;}mm$ rectangular shape and was ground against 320, 400, 600 grade silicon carbide abrasive paper serially. After grinding, the dentine surface were soaked in a solution of 2% NaOCl for 30 minutes and twenty of specimens were treated with 17% EDTA solution for 1 minute. The treated specimens were washed and dried, Root canal sealer, AH26 was prepared according to the manufacture's instructions The Gutta-percha and dentin surface were coated with a thin layer of the freshly mixed seal or. The specimens were left overnight at room temperature. After their initial set, they were transferred to an incubator at $37$^{\circ}C$ for 72 h. After 72 hours, resin blocks were made. The resin block was serially sectioned vertically into stick of $1{\cdot}1mm$. Twenty sticks were prepared from each group. After that, tensile bond strength f3r each stick was measured with Microtensile Tester Failure patterns of the specimens at the interface between gutta-percha and dentin were observed under the SEM(x1000) and Stereomicroscope (LEICA M42O, Meyer Inst., TX U.S.A) at 1.25 x25 magnification. The results were statistically analysed by using a One-way ANOVA and Tukey's test. The results were as follows; 1. Tensile bond strengths($mean{\pm}SD$) were expressed with ascending order as follows: Group 1, $3.09{\pm}$ 1.05Mpa : Group 2, $6.23{\pm}1.16MPa$ : Group 3, $7.12{\pm}1.07MPa$ : Group 4, $10.32{\pm}2.06MPa$. 2. Tensile bond strengths of the group 2 and 4 used disks of gutta-percha for conventional obturation were significantly higher than that of the group 1 and 3 used fir thermoplastic obturation. (p < 0.05). 3. Tensile bond strengths of the group 3 and 4 treated with 2% NaOC1+17% EDTA were significantly higher than that of the group 1 and 2 treated with 2% NaOCl. (p < 0.05). 4. In analysis of failure patterns at the interface between sealer and gutta-percha, there were observed 49 (61%)cases of adhesive failure patterns and 31 (39%) cases of mixed failures patterns.