• 한국화재소방학회논문지
• /
• 제26권3호
• /
• pp.35-39
• /
• 2012

본 논문에서는 정수기의 외부 및 내부에서 인위적으로 착화시켰을 때의 연소 확산 패턴을 분석하고, 소손된 정수기의 화재원인 규명을 위한 자료를 제공하는데 있다. 정수기의 연소 확산 속도는 외부에서 착화시켰을 때보다 내부에서 착화시켰을 때 화염의 진행은 빠른 것으로 분석되었다. 외부에서 착화되어 정수기가 반소 이상 되는데 소요되는 시간은 360 sec 정도이었고, 내부에서 착화시켰을 때는 180 sec 정도가 소요되었다. 즉, 내부에서 착화되면 발생된 열이 내부에 축적되었다가 일순간에 방사되기 때문에 연소가 빠른 것으로 판단된다. 외부에서 착화시켜 소손된 것은 균일한 탄화 패턴을 보이며, 바닥면에 탄화물은 순차적으로 퇴적되었다. 내부에서 착화시켜 소손된 것은 탄화면의 경계가 비교적 선명하였으며, 발화점을 기준으로 브이패턴을 형성하였다. 따라서 연소 패턴의 차이를 통해서 어느 쪽에서 화재가 진행되었는지를 판단할 수 있는 객관적 근거가 제시되었다. 정수기가 화염의 공격을 받아 반소될 때까지 내장된 퓨즈의 용단 및 전원 보호 장치의 작동 등은 발생하지 않았다. 또한 일반화염을 공격 받아 소손된 퓨즈는 금속 홀더 부분에서 탄화가 발생하는 것이 확인됨에 따라 사고원인 판정의 근거로 활용할 수 있을 것으로 판단된다.

• 청정기술
• /
• 제29권2호
• /
• pp.102-108
• /
• 2023

본 연구는 열수가압탄화공법(HTC)을 적용하여 하수슬러지를 탄화시켜 폐기물관리법에 따른 재활용 제품 기준을 만족하고, 응용 블록으로서의 재활용 가능성을 판단하였다. HTC 최적 반응온도와 시간을 통해 생성된 탄화 슬러지에 시멘트를 배합비 별로 배합하여 응용 블록의 공시체를 제작하였고, 중금속 용출 가능성과 성능분석을 진행하였다. 실험 결과 모든 응용 블록에서 중금속이 검출되지 않았으며, 성능분석의 비중과 흡수율의 경우 1.7 미만, 10% 이하의 해당 기준치를 만족하였다. 압축강도의 경우 28일 재령 기준으로 시멘트 5%, 7%의 배합비 경우 A, B, C종 블록 기준치에 만족하였으나, 시멘트 3%의 배합비 경우 A type 블록 기준에 미치지 못하였다. 이후 추가적인 재령을 진행한 결과 42일 차 재령 강도에서 A종 블록 기준을 만족하였다. 따라서 본 연구의 탄화 슬러지와 시멘트의 최적 배합비는 3% 이상 5% 이내로 판단하였으며 향후 응용 블록을 골재로서의 재활용 가능성을 확인하였다.

• 보존과학연구
• /
• 통권22호
• /
• pp.115-132
• /
• 2001

No. 3 Tomb of Bogam-ri, in Naju City, Chollanam-do Province, was a site excavated and inspected from 1996 to 1998 and had a various grave forms, including jar-coffins, stone-chambers and stone-cists. Although most of the metal artifacts excavated from it were severely corroded, we could implement microstructure investigation by collecting samples from the iron axes, iron coffin-nails and iron clamps in which the metal parts were remained. The metal structures were inspected by using metallographic microscope and SEM, and fine components analysis was implemented by ICP. To examine the hardness differences in accordance with the structure distribution, we measured the hardness by structures with Vickers hardness testing machine. As a result of the metal structure inspection, most of them were pure iron, ferrite, and also pearlite, cementite and widmannstaten structures were displayed. We could confirm carbonization was formed on the surface of the iron axes-B, iron coffin-nails-B, and iron clamps-A. There was no carbonization in the rest of the artifacts, and it is not certain that whether the carbonized parts were peeled off through extreme corrosion or they were not carbonized when they were made. In the particular part of a blade, the quality of the material was strengthened through processing. Due to the processing re-grain was caused and fine grain particles were formed. As a result of the ICP component analysis, there were no addition atoms because pure irons were used as materials. In the mean time, No. 17 jar-coffin where the iron axes-A are excavated, is chronologically ordered as from the late-fourth century to the mid-fifth century, and No. 1 and No. 2 stone chambers, where the rest of the artifacts were excavated, as the early-sixth century. It was difficult to relate the periodic differences with the manufacture technique artifacts which we inspected because there were no distinct characteristics of the manufacture technique of the metal structures and it is impossible to conclude the artifacts and sites are at the same period although their periods are different.

• 한국재료학회지
• /
• 제28권4호
• /
• pp.208-213
• /
• 2018

Epitaxial ($11{\bar{2}}0$) a-plane GaN films were grown on a ($1{\bar{1}}02$) R-plane sapphire substrate with photoresist (PR) masks using metal organic chemical vapor deposition (MOCVD). The PR mask with striped patterns was prepared using an ex-situ lithography process, whereas carbonization and heat treatment of the PR mask were carried out using an in-situ MOCVD. The heat treatment of the PR mask was continuously conducted in ambient $H_2/NH_3$ mixture gas at $1140^{\circ}C$ after carbonization by the pyrolysis in ambient $H_2$ at $1100^{\circ}C$. As the time of the heat treatment progressed, the striped patterns of the carbonized PR mask shrank. The heat treatment of the carbonized PR mask facilitated epitaxial lateral overgrowth (ELO) of a-plane GaN films without carbon contamination on the R-plane sapphire substrate. Thhe surface morphology of a-plane GaN films was investigated by scanning electron microscopy and atomic force microscopy. The structural characteristics of a-plane GaN films on an R-plane sapphire substrate were evaluated by ${\omega}-2{\theta}$ high-resolution X-ray diffraction. The a-plane GaN films were characterized by X-ray photoelectron spectroscopy (XPS) to determine carbon contamination from carbonized PR masks in the GaN film bulk. After $Ar^+$ ion etching, XPS spectra indicated that carbon contamination exists only in the surface region. Finally, the heat treatment of carbonized PR masks was used to grow high-quality a-plane GaN films without carbon contamination. This approach showed the promising potential of the ELO process by using a PR mask.

• Carbon letters
• /
• 제15권1호
• /
• pp.25-31
• /
• 2014

A microstructure analysis is carried out to optimize the process parameters of a randomly oriented discrete length hybrid carbon fiber reinforced carbon matrix composite. The composite is fabricated by moulding of a slurry into a preform, followed by hot-pressing and carbonization. Heating rates of 0.1, 0.2, 0.3, 0.5, 1, and $3.3^{\circ}C/min$ and pressures of 5, 10, 15, and 20 MPa are applied during hot-pressing. Matrix precursor to reinforcement weight ratios of 70:30, 50:50, and 30:70 are also considered. A microstructure analysis of the carbon/carbon compacts is performed for each variant. Higher heating rates give bloated compacts whereas low heating rates give bloating-free, fine microstructure compacts. The compacts fabricated at higher pressure have displayed side oozing of molten pitch and discrete length carbon fibers. The microstructure of the compacts fabricated at low pressure shows a lack of densification. The compacts with low matrix precursor to reinforcement weight ratios have insufficient bonding agent to bind the reinforcement whereas the higher matrix precursor to reinforcement weight ratio results in a plaster-like structure. Based on the microstructure analysis, a heating rate of $0.2^{\circ}C/min$, pressure of 15 MPa, and a matrix precursor to reinforcement ratio of 50:50 are found to be optimum w.r.t attaining bloating-free densification and processing time.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2022년도 춘계학술대회
• /
• pp.346-348
• /
• 2022

적재폐기물에서 발생하는 발효열의 발화요인 분석 자료를 기반으로 발생 원인을 규명하는 모니터링 시스템을 구성하였다. 화재 조기경보 유형별 시나리오의 구성과 신속성을 위해 실시간 런타임 환경을 제공하기 위한 유니버설미들웨어를 활용하였다. 적재폐기물의 적재 높이와 압력, 대표적인 구성폐기물인 목재, 건전지, 플라스틱 폐기물의 건조, 표면의 탄화변화를 동적으로 인지해야 한다. 따라서, 저온발화 화재 가능성 데이터 분석을 위한 IoT 상황인지 플랫폼을 동적으로 구성하여 제시하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.29-30
• /
• 2023

Wood is a construction material that has the advantages of carbon dioxide storage ability, noise reflection, and eco-friendliness. In order to use wood for a long time, you must use wood-specific paint, which is called oil stain. Oil stain improves water resistance and moisture resistance, but has the disadvantage of being weak against fire. This is because the oil contained in the oil stain causes a chemical reaction, and this chemical reaction causes the oil stain to spontaneously ignite, igniting nearby combustible materials and causing frequent fires. To improve this, in this study, different flame retardants were mixed and added to oil stain to produce functional oil stain. In addition, we would like to apply it to wood to check glow time and carbonization area. As a result of the experiment, it shows the best performance when mixed at 30(15 + 15)(%) and added to oil stain. The remaining burn time is satisfied from 10% for all samples, and the carbonized area is satisfied when it is 30%.

• 환경위생공학
• /
• 제17권2호
• /
• pp.48-54
• /
• 2002

In this study, the physical properties of coal-based(bituminous, anthracite·bituminous) activated carbon were compared with those of four different commercial activated carbon used for water treatment. In case of bituminous coal and blend coal, the results of SEM analysis indicated that more pore was extended and shaped in activation process than carbonization process. The results of BET analysis indicated that specific surface area of P Co. activated carbon was larger than the others, and C Co. activated carbon, S Co. activated carbon and anthracite + bituminous was similar. Therefore, adsorption capacities and breakthrough time of anthracite + bituminous regarded similar to C Co. activated carbon.

• Environmental Engineering Research
• /
• 제22권4호
• /
• pp.384-392
• /
• 2017

Mango shell (MS) and mango shell activated carbon (MSAC) was used to adsorb crude oil from water at various experimental conditions. The MSAC was prepared by carbonization at $450^{\circ}C$ and chemical activation using strong $H_3PO_4$ acid. The adsorbents were characterized with Fourier Transform Infrared spectroscopy. Investigations carried out included the effects of parametric variations of different adsorbate dose, adsorbent dose, time, temperature, pH and mixing speed on the adsorption of crude oil. The equilibrium isotherm for the adsorption process was determined using Langmuir, Freundlich, Temkin and Dubinin Radushkevich isotherm models. Temkin isotherm was found to fit the equilibrium data reasonably well than others. The result demonstrated that MSAC was more effective for crude oil adsorption than raw mango shell. Optimum conditions were also presented. The enhanced effect from activation was justified statistically using Analysis of Variance and Bonferroni-Holm Posthoc significance test. The pseudo first order kinetics gave a better fit for crude oil adsorption with both MS and MSAC.

• 농업과학연구
• /
• 제36권1호
• /
• pp.19-25
• /
• 2009

This study was carried for recycling laminated PB and MDF of disused furniture. PB and MDF particles taken from disused furniture were heat-treated at $250^{\circ}C$ and four levels of treatment time, 2, 4, 6 and 8 hours. The recycled boards were made with heat-treated particles after milling and screening with 100 mesh. The bending strength of the recycled boards were lower than that of virgin boards while their anti-swelling efficiency were much improved. Their formaldehyde emissivity were very low. Thus it was concluded that the recylcled boards are prospective environment-friendly material for interial consturction.