• Title/Summary/Keyword: carbonate region

Search Result 76, Processing Time 0.033 seconds

Strength Properties of Cementless Permeable Block Based on Blast-Furnace Slag with Alkali Stimulant Additional Ratio (알칼리 자극제 첨가율에 따른 고로슬래그 기반 무시멘트 투수블록의 강도 특성)

  • Ji, Bong-Su;Lee, Sang-Soo
    • Proceedings of the Korean Institute of Building Construction Conference
    • /
    • 2019.11a
    • /
    • pp.168-169
    • /
    • 2019
  • Recently, the flooding of rivers caused by rainy season and heavy rains in Korea causes economic and environmental problems such as flood damage and urban flooding. Therefore, in order to solve these problems, local governments use landscaping methods and drainage facilities to prevent them, but they are not perfect solutions. Domestic awareness also lacks awareness to worry about flooding only during rainy seasons and heavy rains, and to worry about or prevent flooding in the region. In order to solve this problem, we recognize the importance of permeable blocks nationwide and replace or install permeable paving materials on most sidewalks. However, since existing permeable blocks used cement as the main material, calcium carbonate is produced when reacted with water. Efflorescence occurs, and the resulting calcium carbonate blocks the pores of the permeation block, causing a decrease in permeability.

  • PDF

Influence of Temperature and PAA(PolyAcrylic Acid) Solution in the Formation of Calcium Carbonate Crystal (탄산칼슘결정 생성에서 온도와 PAA 영향)

  • Han, Hyun Kak;Kim, Bo-Mi;Kim, Jin-a
    • Korean Chemical Engineering Research
    • /
    • v.46 no.6
    • /
    • pp.1052-1056
    • /
    • 2008
  • Crystal mean size and shape change of calcium carbonate crystal was investigated by the temperature change and addition of PAA solution in the soda process. At low temperature($30^{\circ}C$, $60^{\circ}C$), calcite particles were made by. But at high temperature($80^{\circ}C$), aragonite particles were made by. At $30^{\circ}C$ and $80^{\circ}C$, Crystal shape were not changed by adding PAA solution. At moderate temperature($60^{\circ}C$), aragonite was obtained by adding PAA aqueous solution. Crystal shape was changed by adding PAA molecules. The higher concentration of PAA solution is, the more aragonite particles were observed. Incase of calcite and aragonite, mean size of calcium carbonate crystals were increased by higher molecule weight and higher concentration of PAA solution. But in the shape change region, the molecule weight of PAA was the main parameter of increasing mean crystal size.

Synthesis and Crystal Structure of Amorphous Calcium Carbonate by Gas-Liquid Reaction of System CaO-$C_2 H_5 OH$-$CO_2$ (CaO-$C_2 H_5 OH$-$CO_2$계의 기.액반응에 의한 비정질 탄산칼슘의 합성 및 결정구조)

  • Im, Jae-Seok;Im, Goeng
    • The Journal of Engineering Research
    • /
    • v.6 no.1
    • /
    • pp.97-109
    • /
    • 2004
  • The synthesis and crystal structure of amorphous calcium carbonate obtained from gas-liquid reaction of CaO-$C_2 H_5 OH$-$CO_2$ system according to change of added amount of calcium oxide by blowing $CO_2$ gas and reaction time using ethanol and ethylene glycol were investigated by electric conductivity, X-ray diffraction, and scanning electron microscope. The powdery or gelatinous phases were prepared by passing $CO_2$ gas at a flow rate of 1$\ell$/min into the suspensions containing 10~40g of CaO in mixing solutions 900ml of $C_2 H_5 OH$- and 100ml of ethylene glycol. By rapid filtration and drying the both phases at $60^{\circ}C$ under reduced pressure, the phases converted to the spherical vaterite and amorphous phase. The stable phase of amorphous calcium carbonate(ACC) was formed in the region pH 7-9 but the formation regions of amorphous phase were remarkably affected by pH in the mother liquor. It seems that a part of ACC changed into chain calcite as an intermediate products. The initial reactants prior to the formation of precipitated calcium carbonate is ACC. And ACC is unstable in the aqueous solution and crystallizes finally to calcite by the through-solution reaction. Especially ACC was produced or gelatinous phase which precipitated from the reaction of CaO-$C_2 H_5 OH$-$CO_2$ system.

  • PDF

A Study on Poisoning of the Reforming Catalysts on the Position of Anode in the Direct Internal Reforming Molten Carbonate Fuel Cell (직접 내부개질형 용융탄산염 연료전지의 음극판 위치에 따른 개질 촉매 피독에 관한 연구)

  • Wee, Jung Ho;Chun, Hai Soo
    • Applied Chemistry for Engineering
    • /
    • v.10 no.5
    • /
    • pp.652-659
    • /
    • 1999
  • The trend of poisoning of reforming catalyst along with the position of anodic catalyst bed was studied. Keeping the conditions that steam to carbon ratio was 2.5, operating voltage was 0.75 V, current density was $140mA/cm^2$, the unit cell was operated during 24 hrs at a steady state. And then the cell was stopped, the catalysts packed in the position of inlet, middle and outlet were sampled individually and then the amount of carbon, Li and K poisoned were analysed. After 100 hrs operated, the catalysts at the same positions were analysed at the same manner. The result of this experiment was as followings. After 24 hrs operated, the poisoning amounts of Li and K in the catalyst were 0.27 wt% at inlet, 0.23 wt% at middle and the highest value 1.59 wt% at outlet. After 100 hrs, the amount of poisoning is the highest in the catalyst packed at the inlet of unit cell. The performance simulation of unit cell explained these trends of poisoning catalysts. The simulation told that the catalyst in the region of the inlet of unit cell treated the 90% of initial methane flow rate and the highest electrochemical reaction happened in this region. So the catalysts of this region were the most poisoned with carbon, Li and K and also the rate of poisoning is faster than that of the catalyst at other regions. The temperature at the region of outlet of unit cell was $30^{\circ}C$ higher than that of other regions, so more Li, and K vaporized than at other regions and little reforming reaction at this region made the catalysts poisoning rate low.

  • PDF

Aminolysis of Benzyl 4-Pyridyl Carbonate in Acetonitrile: Effect of Modification of Leaving Group from 2-Pyridyloxide to 4-Pyridyloxide on Reactivity and Reaction Mechanism

  • Bae, Ae-Ri;Um, Ik-Hwan
    • Bulletin of the Korean Chemical Society
    • /
    • v.33 no.8
    • /
    • pp.2719-2723
    • /
    • 2012
  • A kinetic study is reported for nucleophilic substitution reactions of benzyl 4-pyridyl carbonate 6 with a series of alicyclic secondary amines in MeCN. The plot of pseudo-first-order rate constant ($k_{obsd}$) vs. [amine] curves upward, which is typical for reactions reported previously to proceed through a stepwise mechanism with two intermediates (i.e., a zwitterionic tetrahedral intermediate $T^{\pm}$ and its deprotonated form $T^-$). Dissection of $k_{obsd}$ into the second- and third-order rate constants (i.e., $Kk_2$ and $Kk_3$, respectively) reveals that $Kk_3$ is significantly larger than $Kk_2$, indicating that the reactions proceed mainly through the deprotonation pathway (i.e., the $k_3$ process) in a high [amine] region. This contrasts to the recent report that the corresponding aminolysis of benzyl 2-pyridyl carbonate 5 proceeds through a forced concerted mechanism. An intramolecular H-bonding interaction was suggested to force the reactions of 5 to proceed through a concerted mechanism, since it could accelerate the rate of leaving-group expulsion (i.e., an increase in $k_2$). However, such H-bonding interaction, which could increase $k_2$, is structurally impossible for the reactions of 6. Thus, presence or absence of an intramolecular H-bonding interaction has been suggested to be responsible for the contrasting reaction mechanisms (i.e., a forced concerted mechanism for the reaction of 5 vs. a stepwise mechanism with $T^{\pm}$ and $T^-$ as intermediates for that of 6).

A Case of Urinary Tract Infection in Calf with Hypospadias (요도하열 송아지에서 요로감염증례)

  • Park, Yong-Sang;Yang, Hyoung-Seok;Ko, Min-Hee;Ko, Jin-Seok;Cho, Sang-Rae;Kim, Nam-Young;Kang, Tae-Young
    • Journal of Veterinary Clinics
    • /
    • v.29 no.4
    • /
    • pp.352-355
    • /
    • 2012
  • Hypospadias is a rare congenital malformation of the urethra reported in cattle. The urethral lumen of male indigenous Korean calf is open along the ventral aspect of the penis in the perineal region. Renal abscess and renal stone formation causing urinary tact infection has not been reported in hypospadia calves. The objective of this study was investigation for renal abscess and renal stone formation through autopsy. Histopathological examination and laboratory tests were performed. At autopsy, the pustules were formed on the right renal cortex, and the renal medulla abscess were formed on right and left part of the renal pelvis. Histopathological finding, this case was diagnosed as severe acute suppurative and necrotizing pyelonephritis, and severe chronic interstitial nephritis with fibrosis and moderate multifocal acute cystitis with edema. Milky exudate of the kidney has been identified as Actinomyces meyeri using the VITEK-2 system for identification of bacteria, and the stone has been identified as carbonate apatite using FT-IR system for quantification analysis. This case report describe the hypospadias complicated with urinary tract infection due to carbonate apatite stones and Actinomyces meyeri.

Amphiphilic graft copolymers: Effect of graft chain length and content on colloid gel

  • Nitta, Kyohei;Kimoto, Atsushi;Watanabe, Junji;Ikeda, Yoshiyuki
    • Biomaterials and Biomechanics in Bioengineering
    • /
    • v.2 no.2
    • /
    • pp.97-109
    • /
    • 2015
  • A series of amphiphilic graft copolymers were synthesized by varying the number of graft chains and graft chain lengths. The polarity of the hydrophobic graft chain on the copolymers was varied their solution properties. The glass transition temperature of the copolymers was in the low-temperature region, because of the amorphous nature of poly (trimethylene carbonate) (PTMC). The surface morphology of the lyophilized colloid gel had a bundle structure, which was derived from the combination of poly(N-hydroxyethylacrylamide)( poly(HEAA)) and PTMC. The solution properties were evaluated using dynamic light scattering and fluorescence measurements. The particle size of the graft copolymers was about 30-300 nm. The graft copolymers with a higher number of repeating units attributed to the TMC (trimethylene carbonate) component and with a lower macromonomer ratio showed high thermal stability. The critical association concentration was estimated to be between $2.2{\times}10^{-3}$ and $8.9{\times}10^{-2}mg/mL$, using the pyrene-based fluorescence probe technique. These results showed that the hydrophobic chain of the graft copolymer having a long PTMC segment had a low polarity, dependent on the number of repeating units of TMC and the macromonomer composition ratio. These results demonstrated that a higher number of repeating units of TMC, with a lower macromonomer composition, was preferable for molecular encapsulation.

Effect of degumming conditions on the fluorescence intensity of fluorescent silk cocoons: A combined experimental and molecular dynamics study

  • Chan Yeong, Yu;Ezekiel Edward, Nettey-Oppong;Elijah, Effah;Su Min, Han;Seong-Wan, Kim;Seung Ho, Choi
    • International Journal of Industrial Entomology and Biomaterials
    • /
    • v.45 no.2
    • /
    • pp.56-69
    • /
    • 2022
  • Silk is a unique natural biopolymer with outstanding biocompatibility, high mechanical strength, and superior optical transparency. Due to its excellent properties, silk has been widely reported as an ideal biomaterial for several biomedical applications. Recently, fluorescent silk protein, a variant of native silk, has been reported as a biophotonic material with the potential for bioimaging and biosensing. Despite the realization of fluorescent silk, the traditional degumming process of fluorescence silk is crude and often results in fluorescence loss. The loss of fluorescent properties is attributed to the sensitivity of silk fibroin to temperature and solvent concentration during degumming. However, there is no comprehensive information on the influence of these processing parameters on fluorescence evolution and decay during fluorescent silk processing. Therefore, we conducted a spectroscopic study on fluorescence decay as a function of temperature, concentration, and duration for fluorescent silk cocoon degumming. Sodium carbonate solution was tested for degumming the fluorescent silk cocoons with different concentrations and temperatures; also, sodium carbonate solution is combined with Alcalase enzyme and triton x-100 to find optimal degumming conditions. Additionally, we conducted a molecular dynamics study to investigate the fundamental effect of temperature on the stability of the fluorescent protein. We observed degumming temperature as the prime source of fluorescent intensity reduction. From the MD study, fluorescence degradation originated from the thermal agitation of fluorescent protein Cα atoms and fluctuations of amino acid residues located in the chromophore region. Overall, degumming fluorescent silk with sodium carbonate and Alcalase enzyme solution at 25 ℃ preserved fluorescence.

Contamination of Heavy Metals from Dongmyeong Au-Ag Mine Area (동명 금-은 광산 주변의 중금속 오염)

  • 이광춘;김세현;이승호;서용찬
    • Economic and Environmental Geology
    • /
    • v.36 no.1
    • /
    • pp.17-25
    • /
    • 2003
  • Researches were carried out to investigate the characteristics and concentration of heavy metal elements of stream water through Dongmyoung abandoned metal mine and soil adjacent to the mine. The pH range of water was 5.9∼7.1 that implies the water environment was acidic to neutral. The contents and distribution aspects of heavy metals in water samples varied with geochemical characteristics of element, but the concentration of heavy metals has the tendency of increase closer to the mine in general. The results of soil analysis show that total heavy metal concentration of agricultural soil near mine was far lower than those of ore tailing and dumping site. Therefore, the effects of the abandoned mine on stream water and agricultural products were supposed to be insignificant, particularly because the portion of absorbed carbonates and reducible fractions among total heavy metal concentration was relatively lower than the other. Since, however total heavy metal concentrations of mining site were relatively higher than those of adjacent region, there is a possibility of heavy metal difussion when the chemical environment of the site changes due to migration of surface and underground water. It is suggested that the preventive measures for water and soil pollution by the heavy metals would be considered around the region.

Characterization of Zinc-Solubilizing Bacillus Isolates and their Potential to Influence Zinc Assimilation in Soybean Seeds

  • Sharma, Sushil K.;Sharma, Mahaveer P.;Ramesh, Aketi;Joshi, Om P.
    • Journal of Microbiology and Biotechnology
    • /
    • v.22 no.3
    • /
    • pp.352-359
    • /
    • 2012
  • One hundred thirty-four putative Bacillus isolates were recovered from soybean rhizosphere soils of Nimar region to select effective zinc solubilizers for increased assimilation of zinc (Zn) in soybean seeds. These isolates were screened in vitro for zinc-solubilization ability on Tris-minimal agar medium supplemented separately with 0.1% zinc in the form of zinc oxide, zinc phosphate, and zinc carbonate. Of all, 9 isolates and a reference Bacillus cereus ATCC 13061 were characterized and identified as Bacillus species based on Gram-positive reaction, endospore-forming cells, and the presence of iso-$C_{15:0}$ and anteiso-$C_{15:0}$ as predominant fatty acids. On plate assay, two isolates KHBD-6 and KHBAR-1 showed a greater diameter of solubilization halo and colony diameter on all the three zinc compounds. The isolates KHBD-6, KHBAR-1, BDSD-2-2C, and KHTH-4-1 and the reference strain ATCC 13061 had higher soluble zinc concentration in liquid medium supplemented with zinc phosphate and zinc carbonate compounds as compared with the other isolates and uninoculated control. Evaluation under microcosm conditions showed that inoculation of isolates KHBD-6 (57.34 ${\mu}g/g$), KHBAR-1 (55.67 ${\mu}g/g$), and strain ATCC 13061 (53.10 ${\mu}g/g$) significantly increased the Zn concentration in soybean seeds as compared with the other isolates and uninoculated control (47.14 ${\mu}g/g$). This study suggests the occurrence of zinc-solubilizing Bacillus in soils of Nimar region and isolates KHBD-6 and KHBAR-1 were found to be promising zinc solubilizers for increased assimilation of Zn in soybean seeds.