• 한국입자에어로졸학회지
• /
• 제20권2호
• /
• pp.35-45
• /
• 2024

This study demonstrated the applicability of laser-induced breakdown spectroscopy (LIBS) to determine elements (C, H, and O) and their ratios of aerosols, enabling to discriminate various types of carbonaceous aerosols. The elements of carbonaceous aerosols which were collected on Ag membrane filter under Argon environment were successfully detected by using the LIBS. The LIBS responses (emission lines of C, H, and O in the LIBS spectra) to increasing carbonaceous aerosols were evaluated. The sensitivity of emission lines varied with different elements. Limit of detection (LOD) values for C, H, and O elements for aerosols collected on the filter were found to be 3.17 ㎍, 0.15 ㎍, and 2.25 ㎍, respectively. The spectral data (elemental ratios) obtained using LIBS were in reasonable agreements with the nominal atomic ratios (H/C and O/C) of various carbonaceous aerosols. Further, LIBS spectra were investigated by using principal component analysis (PCA) method to identify types of various carbonaceous aerosols. Our results suggested the possibility of the LIBS technique to detect and/or to discriminate various carbonaceous aerosols and to determine their elemental ratios (H/C and O/C).

• Carbon letters
• /
• 제1권3_4호
• /
• pp.129-132
• /
• 2001

Carbonaceous thin films were prepared from acetylene and argon gases by plasma assisted chemical vapor deposition (Plasma CVD) at 873 K. The carbonaceous thin films were characterized by mainly Raman spectroscopy, and their electrochemical properties were studied by cyclic voltammetry and charge-discharge measurements in propylene carbonate (PC) solution. Raman spectra showed that crystallinity of carbonaceous thin films is correlated by the applied RF power. The difference of the applied RF power also affected on the results of cyclic voltammetry and charge-discharge measurements. In PC solution, intercalation and de-intercalation of lithium ion can occur as well as in the mixed solution of EC and DEC.

• 전기화학회지
• /
• 제6권3호
• /
• pp.187-195
• /
• 2003

The present article is concerned with the overview of carbonaceous materials used as anode materials for lithium ion secondary batteries. This article first classified carbonaceous materials into graphite, soft carbon and hard carbon according to their crystal structures, and then summarised the previous works on the characteristics of lithium intercalation/deintercalation into/from the carbonaceous materials. Finally this article reviewed our recent research works on the mechanism of lithium transport through graphite, soft carbon and hard carbon electrodes from the kinetic view point by the analysis of the theoretical and experimental potentiostatic current transients.

• Carbon letters
• /
• 제19권
• /
• pp.107-111
• /
• 2016

• 분석과학
• /
• 제13권3호
• /
• pp.332-337
• /
• 2000

본 연구에서는 페놀레진으로 부터 유도된 탄소질 수분 흡착제의 질소흡착, 표면 특성 및 수분 흡착량을 통하에 물리화학적인 특성을 제시하였다. 탄소질 수분 흡착제의 질소흡착에 관한 연구로부터 각각의 시료에 대하여 Type II의 흡착등온곡선을 얻었다. 이들 시료에 대한 흡착량은 물을 사용하여 세척한 후에 감소함을 나타내었다. BET식을 사용하여 계산된 $S_{BET}$값은 수세 전에 $648.7m^2/g$를 나타내었고, 수세 후에 $189.3m^2/g$를 나타내었다. SEM 모폴로지의 결과로부터 탄소질 수분 흡착제의 표면구조는 수세 전에 침상구조의 성상을 보였고, 수세 후에는 구형입자의 성상을 관찰 할 수 있었다. 최종적으로 수분흡착 효과를 측정한 결과, 수분 흡착량은 25-63%의 흡착량을 나타내었다. 또한 이들의 효과는 낮은 상대습도에서도 좋은 특성을 보였다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2005년도 총회 및 춘계학술발표회
• /
• pp.42-45
• /
• 2005

Accurate prediction of the fate and transport of contaminants in soils and sediments is very Important to environmental risk assessment and effective remediation of contaminated soils and sediments. The fate and transport of contaminants in subsurface are affected by geosorbents, especially carbonaceous materials including black carbon. Various physical and chemical treatment methods have been developed to separate different kinds of carbonaceous materials from soils and sediments. However, the effects of these separation methods on the properties of remaining carbonaceous materials including sorption capacity and linearity are unclear. The objective of this study is to determine if the chemical and thermal treatment methods previously used to separate different carbonaceous material fractions affect the properties of carbonaceous materials including longer term sorption capacity of hydrophobic organic contaminants. The results indicate that treatments with hydrochloric acid (HCl)/hydrofluoric acid (HF), trifluoroacetic acid (TFA), sodium hydroxide (NaOH) may not affect the sorption capacity of black carbon reference materials such as char and soot, however, treatments with acid dichromate $(K_2Cr_2O_7/H_2SO_4)$ and heat $(375^{\circ}C)$ for 24 hours in sufficient of oxygen) decrease the sorption capacity of them. The results of longer term sorption isotherm indicate that 2 days might be enough for trichloroethene (TCE) to equilibrate apparently with treated black carbon reference materials. The results suggest that acid dichromate and heat treatments may not appropriate method to investigate sorption properties of black carbon in soils and sediments.

• Asian Journal of Atmospheric Environment
• /
• 제7권2호
• /
• pp.95-104
• /
• 2013

The study of carbonaceous aerosols in the atmosphere is critical to understand the role of aerosols in human health and climate. Using standardized thermal optical transmittance methods, organic carbon (OC), elemental carbon (EC), and water soluble organic carbon (WSOC) were determined using a combustion sampling system for four types of agricultural crop residues (rice straw, red pepper stems, soybean stems, and green perilla stems) and eight types of forest trees (pine stems, pine needles, ginkgo stems, ginkgo leaves, maple stems, maple leaves, cherry stems, and cherry leaves). The aerosol particles between 0.056 and $5.6{\mu}m$ in size were analyzed using a Micro-Orifice Uniform Deposit Impactor (MOUDI). In the current study, the Carbonaceous Thermal Distribution (CTD) by carbon analyzer was discussed in order to understand the carbon fractions from the twelve types of biomass burning. Also, the concentration of OC, EC, WSOC, and water insoluble organic carbon (WIOC) detected in the emissions were described.

• KSTLE International Journal
• /
• 제10권1_2호
• /
• pp.43-47
• /
• 2009

Influences of carbonaceous ingredient as a solid lubricant in automotive friction materials on friction properties were studied. Three types of carbonaceous ingredients such as natural graphite, artificial graphite, and cokes were mixed using a constrained mixture design. A 1/5 scale brake dynamometer was used to obtain tribological properties. Results showed that cokes substantially increased the friction coefficient, and natural graphite effectively reduced stick-slip phenomena. This significant difference was attributed to the formation of the friction film on the brake pad which was shown to be strongly dependent on the graphite types. The different crystal structures of the carbonaceous solid lubricants played a significant role in the formation of friction film at the interface.

• Transactions on Electrical and Electronic Materials
• /
• 제8권2호
• /
• pp.97-102
• /
• 2007

The charging/discharging characteristics of electric double layer capacitors (EDLCs) for an electric power storage device application were investigated. The specific area of the carbonaceous electrode surface by the BET method was in the range of $1800{\sim}2000\;m^2/g$. The charge distributions during charging and discharging were measured by means of a pulsed-electro-acoustic (PEA) method, and the voltage characteristics of EDLCs connected to solar cells were evaluated. The results showed that the distributions of positive and negative charges were spatially uneven, which was due to the mobility of the positive and negative charges in the carbonaceous electrode surface of the EDLCs. The charge accumulation region concentrated on central part of the carbonaceous electrode and the required times for charging and discharging were almost same.

• Bulletin of the Korean Chemical Society
• /
• 제20권5호
• /
• pp.517-524
• /
• 1999

By heating the magnesiumsilicate (Mg2SiO4:forsterite) xerogel in carbon dioxide, carbonaceous component was intentionally introduced into the amorphous solid precursor. Carbon was introduced homogeneously as unidentate carbonate. Upon being heated at 800 。C in carbon dioxide, the xerogel which had homogeneously distributed carbonaceous component in it crystallized into a single phase product of a new crystalline material, which had approximate composition of Mg8Si4Ol8C. The powder X-ray diffraction pattern of the new crystalline material did not match with any known crystalline compound registered in the powder diffraction file. Crystallization from amorphous xeroget to the new crystalline phase occurred in a very narrow range of temperature, from 750 。C to 850 。C in carbon dioxide, or in dty oxygen. Upon being heated above 850 。C, carbonaceous component was expelled from the product, accompanied by irreversible transition from the new crystalline material to forsterite.