• 제목/요약/키워드: carbon-reduction

검색결과 2,329건 처리시간 0.111초

알칼리 수용액에서 Bis-Cobalt Phenylporphyrin 유도체들에 의한 산소의 전극 촉매적 환원 (The Electrocatalytic Reduction of Dioxygen by Bis-Cobalt Phenylporphyrins in Alkaline Solution)

  • 최용국;문현주;전승원;조기형
    • 대한화학회지
    • /
    • 제37권4호
    • /
    • pp.462-469
    • /
    • 1993
  • Cofacial bis-cobalt tetraphenylporphyrin 유도체 화합물들이 수식된 유리질 탄소 전극과 microelectrode에서 순환 전압 전류법 및 시간 전류법에 의해 산소의 환원 반응을 조사하였다. Microelectrode를 사용하여 시간-전류법에 의해 얻은 전자수 n값들은 유리질 탄소 전극을 사용하여 순환 전압 전류법들에 의해 얻은 결과들과 다소 다른 값으로 나타났다. 알카리성 용액에서 monomer인 cobalt tetraphenylporphyrin 화합물이 수식된 전극에서 산소의 호나원 반응 경로는 중간 생성물인 $H_2O_2$로 가는 2 전자반응으로 진행되었고, dimer인 cofacial bis-cobalt tetraphenylporphyrin 유도체 화합물들이 수식된 전극에서는 최종 생성물인 $H_2O$로 가는 4 전자 반응으로 진행되었다. 이와 같은 산소의 환원 반응은 전체적으로 비가역적으로 확산 지배적인 반응으로 주어졌다.

  • PDF

마이크로웨이브 가열(加熱)을 이용(利用)한 제철(製鐵) 슬래그 중 철(鐵) 회수(回收)에 관한 실험적(實驗的) 연구(硏究) (An Experimental Study on Iron Recovery from Steelmaking Slag by Microwave Heating)

  • 김태영;김은주;신민수;이준호
    • 자원리싸이클링
    • /
    • 제19권1호
    • /
    • pp.21-26
    • /
    • 2010
  • 본 연구에서는 마이크로웨이브 열탄소환원에 의한 제철 슬래그의 Fe 회수를 위한 기초연구로서, CaO-$SiO_2$-FeO계 슬래그의 열탄소환원 반응에 미치는 가스 분위기(질소 및 대기분위기) 및 탄소 첨가량의 영향을 살펴보았다. 실험결과, 질소 분위기에 비하여 대기 분위기에서 반응 시 최고 도달 온도 및 환원률이 증가하고, 대기 분위기에서는 탄소 당량 증가에 따라 최고 도달 온도 및 환원률이 증가하는 경향을 나타내었다. 대기 중 탄소 당량($C_{eq}$)이 5인 조건에서 최고 온도는 1800K에 도달하였으며 약 90%의 철회수율을 얻을 수 있었고, 탄소 당량이 5 이상 증가할 경우 최고 온도 및 환원율의 변화는 크지 않음을 알 수 있었다.

열처리 방법으로 탄소나노튜브에 백금 나노입자의 담지 (Platinum nanoparticles loading on carbon nanotube by impregnation and direct heating method)

  • 이창호;김희연;유승곤
    • 대한공업교육학회지
    • /
    • 제32권2호
    • /
    • pp.188-198
    • /
    • 2007
  • 이 연구의 목적은 열처리 방법으로 탄소나노튜브에 백금나노 입자를 담지하는 것이다. 이 목적을 달성하기 위해서 염화백금산 수용액으로부터 hexachloro platinate(IV)를 탄소나노튜브에 흡착시킨 후 환원제를 사용하지 않고 질소분위기에서 $400^{\circ}C$로 열처리 하여 백금 나노입자를 담지 시켰다. 탄소나노튜브에 흡착된 hexachloro platinate(IV)의 함량은 UV-visible spectrophotometer를 사용하여 정량하였고, 탄소나노튜브에 담지된 백금 나노입자 존재와 분산을 확인하기 위해서 열중량분석, X-ray 회절분석, 투과전자현미경 관찰을 수행하였다. hexachloro platinate(IV)를 흡착시킨 탄소나노튜브를 환원제를 사용하지 않고 질소분위기에서 $400^{\circ}C$에서 열처리하면 2 nm 이하의 백금 나노입자가 균일하게 분포되었다. 한편, $800^{\circ}C$에서 열처리한 경우에는 백금입자들이 상호 응집현상이 발생하여 백금 입자의 크기가 커지고 분산이 균일하지 못했다. 따라서 hexachloro platinate(IV)를 탄소나노튜브에 흡착시킨 후 질소분위기에서 $400^{\circ}C$의 간단한 열처리를 통해서 백금 나노입자를 담지시킬 수 있었다.

녹색물류를 위한 탄소저감정책 평가항목 우선순위에 관한 연구 - 항만 및 물류거점을 중심으로 - (A Study on Selection of and Priority on Assessment Indicators in Green Logistics : Focused on Ports and Inland Hub Terminals)

  • 임미순;박종흠;안승범
    • 한국항만경제학회지
    • /
    • 제25권4호
    • /
    • pp.1-20
    • /
    • 2009
  • 녹색물류는 21세기 지구촌시대의 번영을 위해 피할 수 없는 과제로서 역물류의 활성화, 화석에너지 사용 절감을 통한 이산화탄소 배출 감소, 공동화 등을 통한 시설이용효율화를 들 수 있다. 본 연구의 목적은 녹색물류에 따른 탄소저감 관련 정책을 수립하여 시행해 오고 있는 일본, 미국, 유럽 등의 정책 내용과 선진 사례를 광범위하게 고찰함으로써 우리나라의 친환경 물류정책을 수립, 평가하는데 있어 근거자료를 제공하고자 하는 것이다. 이러한 연구목적을 달성하기 위해 국내 외 항만 및 물류센터에서의 탄소저감사업의 주요 내용과 동향에 대해 고찰하고 그에 따른 예비평가항목 및 예비평가지표를 선정하여 설문조사를 진행하였으며 설문결과에 근거하여 구성항목들의 중요도를 분석하였다. 분석결과, 수송수단 이용에 대한 제한 및 전환과 대체연료의 사용에 대한 평가지표의 가중치에서, 대체연료의 사용의 중요도가 상대적으로 높았으며, 시설 장비의 개선, 탄소배출량의 제한/감축, 물류체계의 개선, 대기시간 단축 평가지표의 상호 중요도를 분석한 결과, 물류체계의 개선의 가중치가 가장 높은 것으로 나타났다. 또한, 저감시스템 구축, 오염원 배출 저감, 친환경소재의 이용 평가지표에서는 저감시스템 구축항목이 가장 중요한 것으로 나타났다. 본 연구는 탄소저감정책 관련 각 예비평가항목 및 예비평가지표들에 대한 상호중요도를 분석함으로써 향후 우리나라에서 녹색물류 관련 정책입안자나 관련 기업담당자에게 탄소저감 사업추진에 있어 핵심이 되는 항목을 선정하는데 가이드라인을 제시해 줄 것이다.

  • PDF

공간 단위 탄소중립 기술적용 시나리오 모형(CATAS) 연구 (A Study on the Carbon Neutrality Scenario Model for Technology Application in Units of Space)

  • 박신영;최유영;이민아
    • 대한토목학회논문집
    • /
    • 제43권1호
    • /
    • pp.63-69
    • /
    • 2023
  • '탄소중립 기술적용 시나리오 모형 (CATAS; Carbon-neutrality Assessment based on Technology Application Scenario)'은 공간 단위에서 에너지전환, 수송, 건물 등 분야에 탄소중립 기술을 적용했을 경우 온실가스 감축 효과성 분석을 제공한다. 모형의 개발범위는 온실가스 배출원은 온실가스 직접배출량 대상으로 분석하며, 공간적 범위는 직접·간접배출의 경계를 공간적 범위로 설정하였다. 그리고 기술적 범위는 2050 탄소중립 시나리오에서 온실가스 배출량이 가장 큰 전환부문의 9개 기술과 산림 흡수원을 포함하였다. 탄소중립률 평가 방법론은 ①온실가스 배출현황 분석, ②기술도입에 따른 에너지생산량 예측, ③온실가스 감축량 산정, ④탄소중립률 산정까지 4단계로 이루어져있다. 웹기반 CATAS-BASIC을 개발 한 후 서울시의 「2050 온실가스 감축추진계획」상 제시된 신재생에너지 보급목표를 적용하여 분석을 실시하였다. 태양광·수소연료전지·수열을 적용한 결과, 서울시의 전환부문 배출량인 1.49백만 tCO2eq 중 기술도입으로 0.43백만 tCO2eq 감축하여 전환부문 탄소중립률은 28.94 %로 분석되었다.

MODELLING STUDY OF THE EFFECT OF CHEMICAL ADDITIVES ON SOOT PRECURSORS REDUCTION

  • Park, J.K.
    • International Journal of Automotive Technology
    • /
    • 제7권4호
    • /
    • pp.501-508
    • /
    • 2006
  • The effect of chemical additives, such as dimethyl ether(DME), ethanol, carbon disulfide on the soot formation were examined numerically. ill this study, the Frenklach soot mechanism was used as a base mechanism to predict the soot formation in the ethane flame. The combination of Westbrook's DME mechanism, Marinov's ethanol mechanism, and chemical kinetic mechanism for hydrogen sulfide and carbon disulfide flames was made with the base mechanism because the DME, ethanol, $CS_2$ additives are added into the ethane fuel. CHEMKIN code was used as a numerical analysis software to simulate the effect of chemical additives on reduction of the polycyclic aromatic hydrocarbons(PAH's) which are soot precursors. From the numerical results it is observed that addition of DME, ethanol and $CS_2$ into ethane fuel can reduce PAH species significantly. That means theses additives can reduce soot formation significantly. Results also strongly suggest suppression of soot formation by these additives to be mainly a chemical effect. Hand OH radicals may be the key species to the reduction of PAH species for additives.

A Non-Pt Catalyst for Improved Oxygen Reduction Reaction in Microbial Fuel Cells

  • Kim, Jy-Yeon;Han, Sang-Beom;Oh, Sang-Eun;Park, Kyung-Won
    • 전기화학회지
    • /
    • 제14권2호
    • /
    • pp.71-76
    • /
    • 2011
  • Fe-tetramethoxyphenylporphyrin on carbon black (Fe-TMPP/C) is examined and compared with carbon (C) and Pt-coated carbon (Pt/C) for oxygen reduction reaction in a two chambered microbial fuel cell (MFC). The Fe-TMPP/C is prepared by heat treatment and characterized using SEM, TEM, and XPS. The electrochemical properties of catalysts are characterized by voltammerty and single cell measurements. It is found that the power generation in the MFC with Fe-TMPP/C as the cathode is higher than that with Pt/C. The maximum power of the Fe-TMPP/C is 0.12 mW compared with 0.10 mW (Pt/C) and 0.02 mW (C). This high output with the Fe-TMPP/C indicates that MFCs are promising in further practical applications with low cost macrocycles catalysts.

Electrochemical Oxidations of Alcohols on Platinum/Carbon Nanotube Composites

  • Kim, Jungsoo;Nam, Dae-Geun;Oh, Weontae
    • Transactions on Electrical and Electronic Materials
    • /
    • 제14권3호
    • /
    • pp.125-129
    • /
    • 2013
  • Composites of platinum and multiwalled carbon nanotubes (MWNTs) were prepared in various reduction conditions and characterized using cyclic voltammetry. The MWNTs were functionalized with carboxylic acid and/or hydroxyl groups in acidic solutions prior to the formation of MWNT-Pt composites. Platinum nanoparticles were deposited onto the chemically-oxidized MWNTs in 1-propanol and 1,3-propanediol. The reduction of Pt precursors in other solutions could induce differences in their morphologies in composite thin films. The morphologies of MWNTs with Pt deposited were dependent on the reduction solutions, and the electrocatalytic activities on alcohols changed accordingly. The electrochemical activities of the as-prepared MWNT-Pt thin films on common alcohols such as methanol and ethanol were investigated.

인삼에 대한 제초제 Quinclorac의 약해 경감 연구 (Studies on Reduction of Quinclorac Phytotoxicity in Ginseng Growth)

  • 이일호;김명수
    • Journal of Ginseng Research
    • /
    • 제20권1호
    • /
    • pp.101-105
    • /
    • 1996
  • Several attempts have been made to protect crops against injury from herbicide quinclorac residue in soil. In this experiment, a selection of suitable crops for bioassay of the residue and a reduction of phytotoxicity by treatment with active carbon were carried out to prevent or to counteract the phytotoxicity. Cucumber (Cuumts satims) and kidney bean (Phaseolus Mgaris) were the suitable indicator plant in points of a sensitivity to the herbicide residue and an easy cultivation. The phytotoxicity was able to be observed at 20 and 30 days after seeding on kidney bean and cucumber respectively. In pot trials, application of the active carbon at 50 kg/10a protected effectively the 2-year-old ginseng plant from the injury in a paddy soil where the herbicide had been treated at 3 g a. i./10a.

  • PDF

과공석 강선에서 미세조직 인자들이 단면감소율에 미치는 영향 (Effects of Microstructural Parameters on the Reduction of Area in Hyper-eutectoid Steel Wires)

  • 안강석;박정훈;배형준;남원종
    • 소성∙가공
    • /
    • 제25권5호
    • /
    • pp.306-312
    • /
    • 2016
  • Effects of manufacturing conditions, such as austenitizing temperature, patenting temperature and carbon content in steels, on mechanical properties, especially on reduction of area (RA), of hyper-eutectoid steel wires were investigated. RA increased and then decreased with transformation temperature. This was attributed to the presence of abnormal structures in steels transformed at low transformation temperatures and the occurrence of shear cracking during tensile testing of steels transformed at high transformation temperatures. The increase of austenitizing temperature resulted in the increased austenite grain size and consequently the decrease of RA. The decrease of RA with increasing the carbon content in steels was attributed to the increased fraction of cleavage fracture in tensile fractured surfaces.