• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.301-301
• /
• 2008

Ion beam (IB)-induced alignment of inorganic materials has been investigated intensively as it provides controllability in a nonstop process for producing high-resolution displays[1][2]. LC orientation via ion-beam (IB) irradiation on the nitrogen doped diamond like carbon (NDLC) thin film deposited by physical deposition method-sputtering was embodied. The NDLC thin film that was deposited by sputter showed uniform LC alignment at the 1200eV of the ion beam intensity. The pretilt angle of LC on NDLC thin films was measured with various IB exposure time and angle. The maximum pretilt angle were showed with IB irradiation angle of $45^{\circ}$ and exposure time of 62.5 sec, respectively. To show NDLC thin film stability in high temperature, thermal stability test was proceeded. The uppermost of the thermal stability of NDLC thin film was $200^{\circ}C$. In this investigation, the electro-optical (EO) characteristics of LC on NDLC thin film were measured.

• 공업화학
• /
• 제9권1호
• /
• pp.28-32
• /
• 1998

두 종류의 유기인계 살충제인 디클로로보스와 클로로피리포스를 UV조사, UV 조사와 $TiO_2$분말 그리고 UV조사와 sea sand를 저압수은 램프를 이용하여 분해실험을 하였다. 이 화합물의 확인은 가스크로마토그래프, 총유기탄소 그리고 이온크로마토그래프를 사용하였다. 두 물질 모두, UV조사와 sea sand가 UV 조사와 UV조사와 $TiO_2$분말보다 분해가 더 잘 되었다. 반응 최종생성물은 디클로르보스에서는 $Cl^-$, 클로로피리포스에서는 $Cl^-$ $SO_4{^{2-}}$등이 생성되었다.

• Journal of Information Display
• /
• 제6권4호
• /
• pp.45-48
• /
• 2005

By applying a critical field treatment instead of the conventional surface treatments such as soft rubber roller, ion beam irradiation, adhesive taping, and laser irradiation, electron emission properties of screen-printed carbon nanotubes (CNTs) were enhanced and investigated based on the emission current-voltage characteristics through scanning electron microscopy. After nanotube emitters were activated at the applied electric-field of 2.5 V/um, the electron emission current density with good uniform emission sites reached the value of 2.13 mA/$cm^2$ , which is 400 times higher than that of the untreated sample, and the turn-on voltage decreased markedly from 700 to 460 V. In addition, enhancement of the alignment of CNTs to the vertical direction was observed.

• 공업화학
• /
• 제10권1호
• /
• pp.30-34
• /
• 1999

클로로타노닐과 엔도슬판을 UV 조사, pH 3.0에서의 UV조사, 그리고 3.5% 염수에서 UV조사를 하여 광분해 거동을 연구하였다. 농약의 광분해과정은 가스크로마토그래프, 총유기탄소, 그리고 이온크로마토그래프를 사용하였다. Low pressure mercury multilamp($8W{\times}6$)를 반응기에 잠수시켜 실험을 하였으며, 초기농도는 10 ppm으로 하였다. 클로로타노닐은 UV 조사, pH 3.0조건에서 UV조사, 그리고 3.5% 염수조건에서 UV조사 조건에서 반응시간 30분에 거의 광분해되었다. 자외선조사에서 엔도슬판-${\alpha}$는 38%, 엔도슬판-${\beta}$는 25% 분해되었다. 엔도슬판-${\alpha}$(83%)는 자외선조사에서 65%, pH 3.0의 자외선조사에서 70%, 35% 염수의 자외선조사에서는 75% 분해되었다. 엔도슬판(16%)는 자외선조사에서 80%, pH 3.0의 자외선조사에서는 98%, 3.5% 염수의 자외선조사에서는 90% 분해되었다.

• 한국전기전자재료학회논문지
• /
• 제20권5호
• /
• pp.456-461
• /
• 2007

In this study, a surface treatment method using accelerated Ar ions was experimented for exposing the carbon nanotubes (CNT) from the screen-printed CNT paste. After making a cathode electrode on the glass substrate, photo sensitive CNT paste was screen-printed, and then back-side was exposed by UV light. Then, the exposed CNT paste was selectively remained by development. After post-baking, the remained CNT paste was bombarded by accelerated Ar ions for removing some binders and exposing only CNTs. As results, the field emission characteristics were strongly depended on the accelerating energy, bombardment time, and the power of RF plasma ion source. When Ar ions accelerated with 100 eV energy from the 100 W RF plasma source are bombarded on the CNT paste surface for 10 min, the emission level and the uniformity were best.

• 전자공학회논문지 IE
• /
• 제44권2호
• /
• pp.26-31
• /
• 2007

카본나노튜브 전계 방출 어레이(carbon nanotube field emission array, CNT FEA)를 유리기판 상에 형성시키기 위하여 CNT 페이스트를 스크린 프린팅 후 표면처리를 수행하였다. 본 실험에서는 효과적인 표면처리 방법으로서 이온 빔을 조사(expose)시키는 방법을 연구하였다. 먼저, 유리 기판상에 감광성 CNT 페이스트를 스크린 프린팅하고 UV 후면노광 및 현상공정에 의해 선택적으로 CNT 페이스트를 남겼다. 다시 고온에서 소성후 CNT들은 바인더 성분들에 의해 문히게 된다. 본 실험에서는 소성된 CNT 페이스트의 표면상에 Ar 이온빔을 가속시켜 페이스트의 바인더(binder)를 선택적으로 제거함으로써 전계방출 특성을 향상시킬 수 있었다. 표면처리를 위한 이온 빔 가속시 이온빔의 가속에너지에 따라 특성이 크게 변화되었는데, 본 연구에서는 100 V의 낮은 가속 전압에서 가장 높은 전계방출 특성을 나타내었으며 가속 전압이 너무 높으면 바인더 성분 외에도 CNT 자체가 제거됨으로써 오히려 특정이 저하됨을 알 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2004년도 제26회 학술발표회 초록집
• /
• pp.102-102
• /
• 2004

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.203-203
• /
• 2012

The SWCNTs network are formed on various plastic substrates such as poly(ethylene terephthalate) (PET), polyimide (PI) and soda lime glass using roll-to-roll printing and spray process. Selective patterning of carbon nanotubes film on transparent substrates was performed using a femtosecond laser. This process has many advantages because it is performed without chemicals and is easily applied to large-area patterning. It could also control the transparency and conductivity of CNT film by selective removal of CNTs. Furthermore, selective cutting of carbon nanotube using a femtosecond laser does not cause any phase change in the CNTs, as usually shown in focused ion beam irradiation of the CNTs. The patterned SWCNT films on transparent substrate can be used electrode layer for touch panels of flexible or flat panel display instead indium tin oxide (ITO) film.

• 한국염색가공학회지
• /
• 제13권5호
• /
• pp.10-10
• /
• 2001

The Purpose of this study was to investigate spectrophotometric characteristics of Korean knotweed extracts. The properties were evaluated by it′s extracting solvent, effect of metallic ion, variations of pH values and effect of light exposure. The results were as following; The highest absorbance was found in methanol extract of Korean knotweed, while the lowest absorbance was carbon tetrachloride extract. The UV-vis. spectra of Korean knotweed colors in several solvents showed hypsochromic shift of n-π/sup ＊/ transition with the polarity of solvent. Absorbance and peak of UV-vis. spectra of Korean knotweed colors became lower and broader by addition of metallic ion. The light stability in irradiation with xenon ]amp of the color solution with Cu were higher than those of Al and Fe. The UV-vis. spectra of Korean knotweed extracts in various pH values showed bathochromic shift under alkaline condition, and their peaks disappeared after 5 hours exposure.

• 한국염색가공학회지
• /
• 제13권5호
• /
• pp.298-305
• /
• 2001

The Purpose of this study was to investigate spectrophotometric characteristics of Korean knotweed extracts. The properties were evaluated by it's extracting solvent, effect of metallic ion, variations of pH values and effect of light exposure. The results were as following; The highest absorbance was found in methanol extract of Korean knotweed, while the lowest absorbance was carbon tetrachloride extract. The UV-vis. spectra of Korean knotweed colors in several solvents showed hypsochromic shift of $n->\pi^*$ transition with the polarity of solvent. Absorbance and peak of UV-vis. spectra of Korean knotweed colors became lower and broader by addition of metallic ion. The light stability in irradiation with xenon ]amp of the color solution with Cu were higher than those of Al and Fe. The UV-vis. spectra of Korean knotweed extracts in various pH values showed bathochromic shift under alkaline condition, and their Peaks disappeared after 5 hours exposure.