• The Journal of Engineering Research
• /
• v.4 no.1
• /
• pp.93-107
• /
• 2002

The active carbon waste which was used in water purification plant was investigated for the improvement of capillary after microwave treatment. The variation of surface area was measured with the various kinds and amounts of active carbon. The water vapor as the activator was verified to improve the capillary but it reacted with the water contained in waste active carbon. In contrast to the water vapor, the $CO_2$ gas improved the surface area about 10-20 % compared to as received one. The best results was observed at the intensity of 2.75 kw microwave. The more effective recovery of active carbon waste was observed at the microwave treatment compared to the rotary kiln treatment. However, the mass production is so difficult in the microwave process.

• Journal of Environmental Science International
• /
• v.10 no.5
• /
• pp.373-380
• /
• 2001

In recent years, the demand of activated carbon has been increasing steadily because of the environmental problems. Among them waste and water treatment and removal of poisonous gas were invorved. Therefore, in this study, activated carbon was made from the waste chinese cabbage and measured the iodine adsorption ability, carbonization yield, and activation yield of the produced activated carbon. The result showed that the carbonization yield was decreased when carbonization temperature was increaed and that the optimal carbonization temperature was $600{\circ}C$. The optimal concentration of NaOH for removing ash in the raw sample was 1~2N. The range of iodine adsorption number of activated carbon using chinese cabbage at $600{\circ}C$. carbonization was 610.82mg/g to 1019.58mg/g. The activation result of carbonization sample showed that the optimal activation condition was the carbonization at $400\circ}C$ and the activation at$700{\circ}C$. So the production of activated carbon using chinese cabbage was possible in the aspect of reuse of resource and decrease of environmental pollution compared to the commercial activated carbon.

• Carbon letters
• /
• v.7 no.3
• /
• pp.180-187
• /
• 2006

The treatment of piggery wastes was carried out at pilot scale using a multilayered metal-activated carbon system followed by carbon bed filtration. The physicochemical properties were obtained from treated samples with aqueous solutions containing metallic ions such as $Ag^+$, $Cu^{2+}$, $Na^+$, $K^+$ and $Mn^{2+}$, which main obsevations are subjected to inspect surface properties, color removal properties by Uv/Vis and EDX. Multilayered metal-activated carbons were contacted with waste water to investigation of the simultaneous catalytic effect for the COD, BOD, T-N and T-P removal. The removal results for the piggery waste using multilayered metal-activated carbon bed was achieved the satisfactory removal performance under permitted values of Ministry of Environment of Korea. The high efficiency of the multilayered metal-activated carbon bed was determined by the performance of this material for trapping, catalytic effect and adsorption of organic solid particles.

• KSBB Journal
• /
• v.13 no.5
• /
• pp.615-620
• /
• 1998

The readily fermentable carbon sources in swine were acetic acid, propionic acid and butyric acid at the average concentrations of 7.2 g/L, 2.2 g/L and 2.7 g/L, respectively. The swine waste also contained excess nitrogen and other mineral sources. In shake flask experiments, the optimal range of cell growth for Azotobacter vinelandii UWD were 1.0∼3.5 g/L of acetic acid, 0.7∼2.0 g/L of propionic acid and 0.5∼2.0 g/L of butyric acid. A mixture of these three acids simulating two times diluted swine waste supported the best cell growth but the amount of carbon sources was limited. In shake flask and fermentor experiments, an addition of 30 g/L of glucose increased the final cell dry weight 8 times while the final poly (3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) concentration increased 86 times compared with using acid mixture only. A. vinelandii UWD preferred organic acids in the sequence of acetic acid, propionic acid, butyric acid, and valeric acid.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.29 no.3
• /
• pp.15-24
• /
• 2006

As Gyoto Agreement, the Climate Change Agreement, has become effective, total weight restriction on waste has started in each country and environment issue becomes one of the most important global issues. Therefore, environmental logistics became important matter, and industries need to establish production system for environmental conscious products and services. In this paper, we compare and analyze environmental conscious logistics activity(ECLA) that affect Carbon Dioxide Discharge(CDD) and packaging waste caused by logistics activity in Korea and Japan. We also propose the optimal alternative to the problem by this comparison and analysis.

• Journal of the Korean Society for Heat Treatment
• /
• v.35 no.6
• /
• pp.337-342
• /
• 2022

In metal cutting, water-soluble cutting oil is used for cooling the surface of the workpiece and improving the surface roughness. However, waste cutting oil contains preservatives and surfactants, and if it is discarded as it is, it has an great influence on environmental pollution. For this reason, regulations on the use of cutting oil are being stricter. Hence, the development of eco-friendly treatment technologies is required. In this study, a diamond electrode doped with boron on a niobium substrate was deposited by thermal filament chemical vapor deposition and waste cutting oil was treated using an electrochemical method. Compared to the total amount of organic carbon contained in the waste cutting oil, it was confirmed that the boron-doped diamonds developed from this study showed much better performance than electrodes that has been widely used before.

• Carbon letters
• /
• v.7 no.2
• /
• pp.105-113
• /
• 2006

The electro-chemical removal (ECR) of water pollutants by metal-ACF electrodes from wastewater was investigated over wide range of ECR time. The ECR capacities of metallic ACF electrodes were related to physical properties such as adsorption isotherm, surface area and pore size and to reaction time. Surface morphologies and elemental analysis for the metal supported ACFs after electro-catalytic reaction were investigated by scanning electron microscopy (SEM) and energy disperse X-ray (EDX) to explain the changes in adsorption properties. The IR spectra of metallic ACFs for the investigation of functional groups show that the electro-catalytic treatment is consequently associated with the removal of pollutants with the increasing surface reactivity of the activated carbon fibers. The metal-ACFs were electro-catalytically reacted to waste water to investigate the removal efficiency for the COD, T-N, $NH_4$-N, $NO_3$-N and $NO_2$-N. From these removal results of the piggery waste using metallic ACFs substrate, satisfactory removal performance was achieved. The removal efficiency of the metallic ACFs substrate was mainly determined by the properties of the material for adsorption and trapping of organics, and catalytic effects.

• Journal of Korean Society of Water and Wastewater
• /
• v.21 no.5
• /
• pp.551-558
• /
• 2007

From the view point of biological wastewater treatment, C/N ratio is one of the most important factor in biological nutrient removal process. However, municipal sewage in Korea is characterized by extremely low content of carbon source and relatively higher portion of N source. Accordingly, it is necessary to dose external carbon source in order to obtain higher degree of carbon source within the process. In this study, the effects of pH pretreatment as an alternative plan for increasing carbon source on the cell disruption and COD solubility of waste activated sludge were conducted under well defined experimental conditions. During 5 hours, the value of COD solubilization rate ($S_R$) at pH 11.5 is approximately 4.4 times higher than the value of $S_R$ at pH 9.5. It is expected that the level of SCOD increased due to the result from cell disruption. However, VSS/TSS ratio was not significantly changed after 5 hours. As Alkalinity changes gradually from less than 15, 30 and 60 meq NaOH/L, average RBCOD/SCOD fraction showed 34, 36 and 45%,respectively.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.4
• /
• pp.465-474
• /
• 2022

Research on the recycling of waste concrete has been conducted mainly focusing on the production of high-quality recycled ag g reg ate, and as a result, standards and specifications for recycled ag g reg ate have been established. However, in the case of waste concrete powder, although a lot of research on its utilization has been conducted in Korea, an innovative technology leading to commercialization has not yet been announced. Recently, research on technology using waste concrete powder as a raw material for clinker or cement has been actively conducted in major overseas advanced countries. This study investigated the overseas cases with regard to high value-added recycling technology and commercialization trend of waste concrete powder for carbon neutrality in cement and concrete industries. A number of studies have reported that it is essential to completely separate the aggregate and hydrated cement paste fraction for recycling of waste concrete powder. Also in major foreig n countries such as EU and USA, commercialization and standardization of using waste concrete powder as a raw material for clinker or a additive for cement are now in progress beyond the R&D stage. Therefore, Research and standardization for recycling of waste concrete powder should be urgently carried out from the perspective of carbon neutrality in Korea.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2019.05a
• /
• pp.223-224
• /
• 2019