• Mycobiology
• /
• 제38권4호
• /
• pp.274-281
• /
• 2010

Cordyceps cardinalis was reported in Japan and the USA in 2004, and its fruiting bodies have recently been cultured in Korea. Herbarium specimens preserved at the Cordyceps Research Institute, Mushtech, Korea were revised and identified as C. cardinalis, based on morphological characters and conidial structures. Most of the C. cardinalis specimens were collected from Mt. Halla in Jeju-do. The effects of various nutritional sources and environmental conditions such as temperature and pH on mycelial growth of C. cardinalis were studied. Oatmeal agar, Martin's peptone dextrose agar, and Schizophyllum (mushroom) genetics complete medium plus yeast extract resulted in the best mycelial growth. Among carbon sources, cereals, and nitrogen sources, maltose, oatmeal, and peptone resulted in the best mycelial growth respectively. Mineral salts helped to increase growth rate but only resulted in thin mycelial density, similar to water agar. A temperature of $25^{\circ}C$ and a pH of 7 resulted in the highest mycelial growth. Based on these results, a Cordyceps cardinalis composite medium (CCM) was formulated with 1% maltose, 2% oatmeal, 1% peptone, and 2% agar. Use of the CCM resulted in slightly better mycelial growth than that of other commonly used agar media. Only organic nitrogen sources imparted a reddish pigmentation to the agar media, but this character diminished after several subcultures. A 7 day culture duration resulted in the best mycelial growth.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2009년 춘계학술발표대회 논문집
• /
• pp.222-225
• /
• 2009

The apartment housing in Korea has been rapidly constructed by adapting the most suitable construction methods as like wall structure, wet and united construction. But most of short-lived equipments usually filled in the structure which has longer life, and it causes not only to make difficult coping with the deterioration of equipments but also to let buildings remained deteriorate themselves. The buildings can be remodelled to slow down the terms of deterioration or reconstructed to give a new life of themselves, although the disposal of wastes or the lack of natural resources still be problems and unsolved that can occurred in pulling down and reconstructing the buildings. Furthermore, it is the time to need keeping with worldwide trends and movements as like sustainability or 'green growth' movements based on low carbon emissions. The researches for Long-Life Housing apartments which has durability and variation have been advanced up to now. Long-Life Housing apartments can separate their structures from equipments and interior or exterior materials of buildings. Therefore equipments or materials of buildings can be easily repaired and replaced with new ones, even if they are deteriorated themselves. Also, the construction process of Long-Life Housing apartments can be independent from the matter of proprietary rights, terms of durability, decision rights and so on. 'The law of Possession and Management of Collective Building' and the 'Regulation of Management of Collective Building' established by each local governments are already legislated for declaring the rights of using and ownership, responsibilities of each parts of apartment buildings. These laws and regulations classify the ownership of each parts of apartment buildings, and divide the ownership with public possession and exclusive possession. Therefore, this study will conduct comparative analysis between 'The law of Possession and Management of Collective Building' and 'the Regulation of Management of Collective Building' and find problems which can be occurred in future construction of Long-Life Housing apartments. It will be helpful to revise laws and regulations.

• 콘크리트학회논문집
• /
• 제16권2호
• /
• pp.175-184
• /
• 2004

횡방향철근에 의하여 구속된 기존의 철근콘크리트 부재를 섬유에 의하여 보수$\cdot$보강할 경우에 그 부재는 철근과 섬유에 의하여 동시에 구속된다. 이렇게 두 가지 재료에 의하여 복합구속된 콘크리트의 거동은 구속재료의 응력-변형률 곡선 및 구속압에 따라서 달라진다. 이 논문에서는 나선형철근과 섬유에 의하여 동시에 구속된 24개의 실린더 실험을 통하여 복합재료에 의하여 구속된 콘크리트의 거동을 분석하였다. 실험에 의하면 복합재료에 의하여 구속된 콘크리트의 거동은 한 가지 재료만에 의하여 구속된 콘크리트의 거동과 큰 차이를 나타냈다.

• 대한기계학회논문집A
• /
• 제34권6호
• /
• pp.757-762
• /
• 2010

탄소섬유강화 복합재료는 금속재료에 비하여 높은 비강성과 비강도 등의 우수한 기계적 성질을 나타내고 있으며, 이러한 이유로 최근 경량화가 요구되는 항공기용 재료와 자동차용 재료 등으로 그 사용이 급격히 증가하여 금속재를 대체하고 있다. 그러나 대부분의 기계구조물에서는 반복하중에 의한 피로 파손이 주로 발생하고 있다. 그러므로 섬유강화 복합재를 사용한 기계구조물의 내구성을 확보하기 위해서는 이에 대한 피로 해석 및 내구성 평가가 필요하다. 따라서 피로 손상 모델을 이용하여 피로 시험으로부터 구한 손상량을 이용하여 피로손상 누적곡선을 획득하고 해석하였다.

• Smart Structures and Systems
• /
• 제19권3호
• /
• pp.309-322
• /
• 2017

In this paper, the buckling, and free vibration analysis of tapered functionally graded carbon nanotube reinforced composite (FG-CNTRC) micro Reddy beam under longitudinal magnetic field using finite element method (FEM) is investigated. It is noted that the material properties of matrix is considered as Poly methyl methacrylate (PMMA). Using Hamilton's principle, the governing equations of motion are derived by applying a modified strain gradient theory and the rule of mixture approach for micro-composite beam. Micro-composite beam are subjected to longitudinal magnetic field. Then, using the FEM, the critical buckling load, and natural frequency of micro-composite Reddy beam is solved. Also, the influences of various parameters including ${\alpha}$ and ${\beta}$ (the constant coefficients to control the thickness), three material length scale parameters, aspect ratio, different boundary conditions, and various distributions of CNT such as uniform distribution (UD), unsymmetrical functionally graded distribution of CNT (USFG) and symmetrically linear distribution of CNT (SFG) on the critical buckling load and non-dimensional natural frequency are obtained. It can be seen that the non-dimensional natural frequency and critical buckling load decreases with increasing of ${\beta}$ for UD, USFG and SFG micro-composite beam and vice versa for ${\alpha}$. Also, it is shown that at the specified value of ${\alpha}$ and ${\beta}$, the dimensionless natural frequency and critical buckling load for SGT beam is more than for the other state. Moreover, it can be observed from the results that employing magnetic field in longitudinal direction of the micro-composite beam increases the natural frequency and critical buckling load. On the other hands, by increasing the imposed magnetic field significantly increases the stability of the system that can behave as an actuator.

• 한국소음진동공학회논문집
• /
• 제24권3호
• /
• pp.247-252
• /
• 2014

This paper presents a novel impact sensor which can be fabricated with smart paint made of grapheme. This smart nano paint can be easily installed on structures using a spray-on technique and that can make the sensor low cost and practical. The graphene effectively improves the piezoresistivity of the smart paint and that is available to achieve sensitive impact sensor with high gauge factor. The nano smart-paint can detect sufficient impact to cover the damaged energy range of the composite around 1~3J. The voltage outputs from the sprayed paints show fairly linear responses after signal processing. The impact makes deformation of the structure and it brings change of piezoresistivity of the paint and those converts into voltage output consequently by means of a simple signal processing system. The nano smart paint is lightweight and easily applied to the structural surface, and there is no stress concentration. The nano smart paint is expected to be a cost effective and sensitive multi-functional sensor for composites and other damage monitoring applications in the field of structural health monitoring.

• International Journal of Concrete Structures and Materials
• /
• 제8권3호
• /
• pp.213-228
• /
• 2014

Alkali-activated binder (AAB) is recently being considered as a sustainable alternative to portland cement (PC) due to its low carbon dioxide emission and diversion of industrial wastes and by-products such as fly ash and slag from landfills. In order to comprehend the behavior of AAB, detailed knowledge on relations between microstructure and mechanical properties are important. To address the issue, a new approach to characterize hardened pastes of AAB containing fly ash as well as those containing fly ash and slag was adopted using scanning electron microscopy (SEM) and energy dispersive X-ray spectra microanalyses. The volume stoichiometries of the alkali activation reactions were used to estimate the quantities of the sodium aluminosilicate (N-A-S-H) and calcium silicate hydrate (CSH) produced by these reactions. The 3D plots of Si/Al, Na/Al and Ca/Si atom ratios given by the microanalyses were compared with the estimated quantities of CSH(S) to successfully determine the unique chemical compositions of the N-A-S-H and CSH(S) for ten different AAB at three different curing temperatures using a constrained nonlinear least squares optimization formulation by general algebraic modeling system. The results show that the theoretical and experimental quantities of N-A-S-H and CSH(S) were in close agreement with each other. The $R^2$ values were 0.99 for both alkali-activated fly ash and alkali-activated slag binders.

• Steel and Composite Structures
• /
• 제7권6호
• /
• pp.457-468
• /
• 2007

Analytical and experimental investigation on dynamic properties of extra lightweight concrete sandwich beams reinforced with various lay ups of carbon reinforced epoxy polymer composites (CFRP) are discussed. The lightweight concrete used in the core of the sandwich beams was made up of extra lightweight aggregate, Lica. The density of concrete was half of that of the ordinary concrete and its compressive strength was about $100Kg/cm^2$. Two extra lightweight unreinforced (control) beams and six extra lightweight sandwich beams with various lay ups of CFRP were clamped in one end and tested under an impact load. The dimension of the beams without considering any reinforcement was 20 cm ${\times}$ 10 cm ${\times}$ 1.4 m. These were selected to ensure that the effect of shear during the bending test would be minimized. Three other beams, made up of ordinary concrete reinforced with steel bars, were tested in the same conditions. For measuring the damping capacity of sandwich beams three methods, Logarithmic Decrement Analysis (LDA), Hilbert Transform Analysis (HTA) and Moving Block Analysis (MBA) were applied. The first two methods are in time domain and the last one is in frequency domain. A comparison between the damping capacity of the beams obtained from all three methods, shows that the damping capacity of the extra lightweight concrete decreases by adding the composite reinforced layers to the upper and lower sides of the beams, and becomes most similar to the damping of the ordinary beams. Also the results show that the stiffness of the extra lightweight concrete beams increases by adding the composite reinforced layer to their both sides and become similar to the ordinary beams.

• Composites Research
• /
• 제27권3호
• /
• pp.103-108
• /
• 2014

섬유강화복합재는 단위중량당 강도와 강성이 뛰어나고, 단위중량이 작으며, 내부식성이 뛰어난 점 등의 다양한 재료성질의 장점이 있는 재료로서 건설분야에 적용이 점차 증가하고 있으며, 섬유강화복합재의 건설분야에 활용한 예로 수상 부유식 태양광발전 구조물이 있다. 수상 부유식 태양광발전 구조물은 최근 저탄소 녹색성장의 대표적인 사례로 각광받고 있으며, 안전성 및 경제성을 확보하기 위한 연구가 다수 진행되었다. 또한 수상 부유식 태양광발전 구조물은 최근 국내에 상용화 단지가 시공되었다. 본 논문에서는 상용화 과정에서 경제성 및 시공성을 위해 개발된 수상 부유식 태양광발전 구조물의 요소기술의 연구 개발 내용을 제시하였다.

• Composites Research
• /
• 제30권1호
• /
• pp.65-70
• /
• 2017

일방향 탄소섬유 복합재료는 복잡한 성형 공정과 낮은 드레이핑능을 보여 비교적 단순한 형태의 구조물 제작에 제한적으로 사용되어 왔으나, 최근 이를 해결하고자 성형성과 생산효율이 우수한 장섬유 복합재료(Long Fiber Prepreg Sheet; LFPS)가 제안되었다. 본 연구에서는 단순한 성형 공정과 높은 성형 정밀도를 갖는 LFPS를 활용하여 전자 기기용 커버 플레이트 설계를 수행하였다. 설계에 앞서 리브 구조가 적용되는 대상 구조물을 8-inch 태블릿 PC 제품의 뒷 커버로 선정하였다. 해당 구조물에 평판에 적용되는 대표적인 하중 조건을 선정하여 유한요소해석에 적용하였고, 이를 활용하여 리브 구조물의 패턴과 리브 형상 변화에 따른 구조물의 구조 강성을 확인하였다. 해석 결과 제한된 부피 내에서 최적의 리브 패턴과 형상을 확보하였으며, 리브 폭이 균일하지 않은 경우가 균일한 경우에 비해 6~10% 처짐량이 감소함을 확인하였다.