• 대한조선학회논문집
• /
• 제61권2호
• /
• pp.135-142
• /
• 2024

There is a lot of concern around the world about air pollution from ships. The majority of air pollution from ships comes from fuel combustion. The combustion process produces various air pollutants such as carbon monoxide (CO), carbon dioxide (CO₂), nitrogen oxides (NOx), sulfur oxides (SOx), and particulate matter (PM), each of which has adverse effects on people and is a major environmental problem. To prevent this, the International Maritime Organization (IMO) has strengthened the regulation of pollutant emissions through the Convention for the Prevention of Marine Pollution. This paper discusses the types of air pollutants emitted by ships, their current status, and the latest technologies to reduce emissions of NOx and SOx.

• Journal of Electrochemical Science and Technology
• /
• 제11권4호
• /
• pp.421-429
• /
• 2020

This report describes the simultaneous detection of the two dyes most commonly used in food, tartrazine (TZ) and sunset yellow (SY), based on a microcomposite of carbon paste decorated with La₂O₃ and TiO₂. Anodic currents for SY-TZ were observed at 0.89-1.21 V by cyclic voltammetry (CV) separated with a ΔV of 0.32 V. The increased anodic peak currents compared to that of the unmodified carbon paste electrode were almost 50 and 41% for SY-TZ, respectively. The detection limits with the optimal amount of La₂O₃-TiO₂ were 0.02 and 0.03 µmol/L, respectively. The relative standard deviation (RSD) based on fifty measurements was less than 3%. The versatility and novelty of the sensor were tested with food samples containing these substances and other substances.

• Carbon letters
• /
• 제3권4호
• /
• pp.219-225
• /
• 2002

The two-step surface modifications of activated carbon was carried out to improve the adsorption capacity of toxic heavy metal ions in liquid phase. Physical and chemical properties of the as-received activated carbon (AC) and two kinds of surface-modified activated carbons ($1^{st}AC$ and $2^{nd}AC$) were evaluated through the BET analysis, surface acidity, and oxides measurements. Specific surface area and pore volume did not significantly change, but surface oxide-group remarkably increased by the surface modification. Equilibrium and batch adsorptions of the various metals, such as Pb, Cd, and Cr, using AC, $1^{st}AC$, and $2^{nd}AC$ were performed at initial pH 5. The adsorption capacity and rate of $2^{nd}AC$ were higher than those of AC and $1^{st}AC$. The carboxylic/sodium carboxylate complex groups were developed from the two-step surface modification of activated carbon, which strongly affected the adsorption of metal ions.

• Corrosion Science and Technology
• /
• 제21권6호
• /
• pp.514-524
• /
• 2022

Carbon emissions from fuel consumption have been pointed by scientists as the cause of global warming. In particular, fossil fuels are known to emit more carbon when burned than other types of fuels. In this regard, International Maritime Organization has announced a regulation plan to reduce carbon dioxide emissions. Therefore, recently, Liquefied Natural Gas propulsion ships are responding to such carbon reduction regulation. However, from a long-term perspective, it is necessary to use carbon-free fuels such as hydrogen and ammonia. Nitrogen oxides might be generated during ammonia combustion. There is a possibility that incompletely burned ammonia is discharged. Therefore, rather than being used as a direct fuel, Ammonia is only used to reduce NO_X such as urea solution in diesel vehicle Selective Catalyst Reduction. Currently, LPG vehicle fuel feed system studies have evaluated the durability of combustion injectors and fuel tanks in ammonia environment. However, few studies have been conducted to apply ammonia as a ship fuel. Therefore, this study aims to evaluate corrosion damage that might occur when ammonia is used as a propulsion fuel on ships.

• 공업화학
• /
• 제21권3호
• /
• pp.243-251
• /
• 2010

연소배가스에 존재하는 질소산화물의 제거를 위해서는 촉매 환원, 흡수, 흡착 등 화학적 기술이 적용되고 있는데, 장기적으로는 환경친화적이고 에너지 소모가 적은 생물학적 공정의 개발 및 이용이 필요하다. 본 논문에서는 연소 배가스에 존재하는 질소산화물을 제거하기 위한 생물학적 공정의 기술동향을 살펴보고 각각의 장단점을 고찰하였다. 질산화와 탈질 기작을 이용하는 박테리아 시스템과 광합성 미세조류를 이용하는 시스템으로 구분하여 기술의 원리와 현재의 기술 수준을 논하였다. 두 경우 모두 처리속도를 높이기 위해서는 불용성의 일산화질소를 일단 적절한 흡수제에 고농도로 포집시킨 후 미생물에 의하여 분해 또는 고정하는 방향이 바람직하며, 배가스 중 $CO_2$와 NOx를 동시에 고정이 가능하고 별도의 탄소원이 요구되지 않는 미세조류의 활용이 기대된다.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2013년 춘계학술대회
• /
• pp.655-668
• /
• 2013

In this study, a combination of the plasma discharge in the reactor by the reaction surface discharge reactor complex catalytic reactor and air pollutants, hazardous gas SOx, change in frequency, residence time, and the thickness of the electrode, the addition of simulated composite catalyst composed of a variety of gases, including decomposition experiments were performed by varying the process parameters. 20W power consumption 10kHz frequency decomposition removal rate of 99% in the decomposition of sulfur oxides removal experiment that is attached to the titanium dioxide catalyst reactor experimental results than if you had more than 5% increase. If added to methane gas was added, the removal efficiency increased decomposition, the oxygen concentration increased with increasing degradation rate in the case of adding carbon dioxide decreased.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권6호
• /
• pp.774-779
• /
• 2012

MILD(Moderate and Intense Low Oxygen Dilution) 연소는 연소 가스의 재순환을 이용하여 고온 형성을 최대한 억제하고 질소산화물의 발생을 저감하는 동시에 연소로의 내부 온도 균일화를 통한 열 이용 효율을 향상시킬 수 있는 연소기술이다. 본 연구에서는 원추형 연소로에서 연료 유량은 고정하고 공기 유량으로 당량비(${\Phi}$)를 조절하고 배기가스를 측정하여 MILD 연소특성을 도출하였다.

• 한국재료학회지
• /
• 제16권1호
• /
• pp.50-57
• /
• 2006

Phase mixtures of Titanium boride, nitride, and carbide powder were produced by the reduction of a mixture of titanium and boron oxides with carbon via a gas-solid phase reaction. Boron oxides produce a vapour phase or decompose to a metal sub-oxide gaseous species when reduced at elevated temperature. The mechanism of BO sub-oxide gas formation from $B_2O_3$ and its subsequent reduction to titanium diboride for the production of uniform size hexagonal platelets is explained. These gaseous phases are critical for the formation of boride, nitride and carbide ceramics. For the production of ceramic phase composite microstructures, the nitrogen partial pressure was the most critical factor. Some calculated equilibrium phase fields has been verified experimentally. The theoretical approach therefore identifies conditions for the formation of phase mixtures. The thermodynamic and kinetic factors that govern the phase constituents are also discussed.

• Applied Science and Convergence Technology
• /
• 제27권4호
• /
• pp.61-64
• /
• 2018

The basic principle and concept for hydrogen production via water-splitting process are introduced. In particular, recent research activities and their progress in the photoelectrochemical water-splitting process are investigated. The material perspectives of semiconducting photocatalysts are considered from metal oxides, including titanium oxides, to carbon compounds and perovskites. Various structural configurations, from conventional photoanodes with metal cathodes to tandem and nanostructures, are also studied. The pros and cons of each are described in terms of light absorption, charge separation/photoexcited electron-hole pair recombinations and further solar-to-hydrogen efficiency. In this research, we attempt to provide a broad view of up-to-date research and development as well as, possibly, future directions in the photoelectrochemical water-splitting field.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권8호
• /
• pp.838-842
• /
• 2015

The Li-air battery is a promising candidate for the most energy-dense electrochemical power source because it has 5 to 10 times greater energy storage capacity than that of Li-ion batteries. However, the Li-air cell performance falls short of the theoretical estimate, primarily because the discharge terminates well before the pore volume of the air electrode is completely filled with lithium oxides. Therefore, the structure of carbon used in the air electrode is a critical factor that affects the performance of Li-air batteries. In a previous study, we reported a new class of carbon nanomaterial, named carbon nanoballs (CNBs), consisting of highly mesoporous spheres. Structural characterization revealed that the synthesized CNBs have excellent a meso-macro hierarchical pore structure, with an average diameter greater than 10 nm and a total pore volume more than $1.00cm^3g^{-1}$. In this study, CNBs are applied in an actual Li-air battery to evaluate the electrochemical performance. The formation mechanism and electrochemical performance of the CNBs are discussed in detail.