• Journal of the Semiconductor & Display Technology
• /
• v.2 no.1
• /
• pp.21-24
• /
• 2003

Sludged silicon powders that are generated during silicon ingot slicing process have potential usage as silicon source in fabricating silicon carbide powders by adding carbon. A thermodynamic calculation is performed to consider a plausible formation condition for the silicon carbide powders. A thin silicon oxide layer around silicon powder is sufficient to supply equilibrium oxygen partial pressure at the formation temperature($1400^{\circ}C$) of the silicon carbide in the Si-C-O ternary system. Formation of silicon carbide by using the sludged silicon powders is more efficient than by using silicon oxide powders.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.6
• /
• pp.1060-1062
• /
• 2007

• Carbon letters
• /
• v.14 no.2
• /
• pp.89-93
• /
• 2013

Size-sorted graphene nanoplatelets are highly desired for fundamental research and technological applications of graphene. Here we show a facile approach for fabricating size-sorted graphene oxide (GO) nanoplatelets by a simple centrifugal method using different dispersion solvents. We found that the small-sized GO nanoplatelets were more effectively separated when dispersed in water or dimethylformamide (DMF) than in an alkali aqueous solution. After several iterations of the centrifugation, the sizes of GO in the supernatant solution were mostly several micrometers. We found that the GO area was not strongly correlated with the C-O content of the GO dispersed in water. However, the size-sorted GO nanoplatelets in DMF showed different C-O content, since DMF can reduce GO nanoplatelets during exfoliation and centrifugation processes.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.8
• /
• pp.2304-2308
• /
• 2010

A $LiNi_{0.8}Co_{0.15}Al_{0.05}O_2$ (LNCAO/C) active material composite cathode was coated with carbon. The conductive carbon coating was obtained by addition of surfactant during synthesis. The addition of surfactant led to the formation of an amorphous carbon coating layer on the pristine LNCAO surface. The layer of carbon coating was clearly detected by FE-TEM analysis. In electrochemical performance, although the LNCAO/C showed similar capacity at low C-rate conditions, the rate capability was improved by the form of the carbon coating at high current discharge state. After 40 cycles of charge-discharge processes, the capacity retention of LNCAO/C was better than that of LNCAO. The carbon coating is effectively protected the surface structure of the pristine LNCAO during Li insertion-extraction.

• Toxicological Research
• /
• v.26 no.4
• /
• pp.267-273
• /
• 2010

As the use of carbon fullerene increases in the chemical industry, the concern over its biological and toxicological effects is also increasing. In this study, the suspension of carbon fullerene (C60) in phosphate buffered saline was prepared and toxicity was investigated using cultured RAW 264.7 and in intraperitoneally injected mice, respectively. The average size of carbon fullerene in the suspension was $53.7{\pm}26.5nm$ when determined by particle size analyzer. Cell viability was significantly decreased by the exposure of carbon fullerene ($0.25\sim2.00\;{\mu}g/ml$) for 96 hrs in the cultured RAW 264.7 cells. Intracellular reduced glutathione (GSH) level was also decreased compared to the level of the non-treated control group during the exposure period, while the level of nitric oxide was increased. When mice were intraperitoneally injected with carbon fullerene, serum cytokine levels of IL-1 and IL-6 were increased with the increased expression of inflammatory genes in peritoneal macrophage and T cell distribution in blood lymphocytes. The results suggested inflammatory responses were induced by carbon fullerene.

• Journal of information and communication convergence engineering
• /
• v.11 no.4
• /
• pp.288-292
• /
• 2013

In this paper, a carbon implant is investigated in detail from the perspectives of performance advantages and side effects for the thick n-type metal-oxide-semiconductor field-effect transistor (n-MOSFET). Threshold voltage ($V_{th}$) adjustment using a carbon implant significantly improves the $V_{th}$ mismatch performance in a thick (3.3-V) n-MOS transistor. It has been reported that a bad mismatch occurs particularly in the case of 0.11-${\mu}m$ $V_{th}$ node technology. This paper investigates a carbon implant process as a promising candidate for the optimal $V_{th}$ roll-off curve. The carbon implant makes the $V_{th}$ roll-off curve perfectly flat, which is explained in detail. Further, the mechanism of hot carrier injection lifetime degradation by the carbon implant is investigated, and new process integration involving the addition of a nitrogen implant in the lightly doped drain process is offered as its solution. This paper presents the critical side effects, such as Isub increases and device performance shifts caused by the carbon implant and suggests an efficient method to avoid these issues.

• Korean Chemical Engineering Research
• /
• v.49 no.1
• /
• pp.1-9
• /
• 2011

Platinum catalysts were prepared by impregnating platinum precursor on titania-, vanadia-, zirconia- and ceria-incorporated silicas followed by hydrogen peroxide treatment. The effects of the oxide incorporation and the hydrogen peroxide treatment in the preparation of the platinum catalysts on their platinum dispersion and catalytic activity in carbon monoxide oxidation were investigated. XRD, TEM, EXAFS, XPS and carbon monoxide chemisorption studies confirmed the high dispersion of platinum even on silica by the oxide incorporation and hydrogen peroxide treatment. However, the type of oxides incorporated on silica caused considerable variances in the adsorption and the catalytic activity in the oxidation of carbon monoxide on them. The incorporation of titania, zirconia and ceria on silica and further hydrogen peroxide treatment enhanced the platinum dispersion, resulting in the improved catalytic activities. Among the catalysts supported on the oxide-incorporated silicas, the platinum catalyst supported on zirconia-incorporated silica exhibited the highest activity because of the highest platinum dispersion due to the formation of Pt-O-Zr bonds.

• Clean Technology
• /
• v.28 no.3
• /
• pp.232-237
• /
• 2022

Biorefineries, in which renewable resources are utilized, are an eco-friendly alternative based on biomass feedstocks. Alginic acid, a major component of brown algae, which is a type of marine biomass, is widely used in various industries and can be converted into value-added chemicals such as sugars, sugar alcohols, furans, and organic acids via catalytic hydrothermal decomposition under certain conditions. In this study, ruthenium-supported activated carbon and magnesium oxide were mixed and applied to the depolymerization of alginic acid in a batch reactor. The addition of magnesium oxide as a basic promoter had a strong influence on product distribution. In this heterogeneous catalytic system, the separation and purification processes are also simplified. After the reaction, low molecular weight alcohols and organic acids with 5 or fewer carbons were produced. Specifically, under the optimal reaction conditions of 30 mL of 1 wt% alginic acid aqueous solution, 100 mg of ruthenium-supported activated carbon, 100 mg of magnesium oxide, 210 ℃ of reaction temperature, and 1 h of reaction time, total carbon yields of 29.8% for alcohols and 43.8% for a liquid product were obtained. Hence, it is suggested that this catalytic system results in the enhanced hydrogenolysis of alginic acid to value-added chemicals.

• YAKHAK HOEJI
• /
• v.43 no.2
• /
• pp.198-207
• /
• 1999

The aim of the present investigation was to examine whether YH439, a hepatoprotective agent, exerts protective effect against hepatotoxicity and reduces the production of cytokines and NO in lipopolysaccharide (LPS)-primed rats with carbon tetrachloride ($CCl_4$). Administration of LPS following a single dose of CCl4 injection resulted in remarkable elevations of the serum $TNF{\alpha},{\;}IL-l{\beta$ and IL-6 level. The serum NO level was moderately elevated and severe liver damage was evidenced by increases in serum alanine aminotransferase (ALT) and sorbitol dehydrogenase (SDH) activities. YH439 decreased the levels of TNF, $IL-l{\beta}$, IL-6, ALT, SDH as well as NO in the serum elevated by CCl4+LPS in a dose-dependent manner. Inducible nitric oxide synthase (iNOS) level was decreased in the liver of rats treated with YH439. The increased iNOS activity induced by LPS and $interferon-{\gamma}$ was significantly decreased in RAW 264.7 cells by YH439 treatment. YH439 increased the GSH level decreased by $CCl_4+LPS$ and suppressed the ratio of GSSG/GSH. The reduction of hepatotoxicity by YH439 may associated with the decrease in the production of cytokines as well as suppression of iNOS protein in conjunction with an increase in the GSH level.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.1
• /
• pp.257-260
• /
• 2014