• Carbon letters
• /
• 제9권4호
• /
• pp.308-315
• /
• 2008

In the present study, fast isothermal stabilization processes for rayon precursor fabrics were performed at $350^{\circ}C$ and $400^{\circ}C$ within 3 minutes and the chemical and physical characteristics of the stabilized fabrics were investigated. In addition, rayon precursor fabrics were pre-treated with three different phosphorous-based flame retardants and then stabilized. The effect of flame retardants on the chemical composition, thermal shrinkage, weight change, thermal stability and XRD results was examined, comparing with those of the precursor fabrics. The result showed that the stabilization of rayon fabrics was most effective as the stabilization temperature was $350^{\circ}C$, the stabilization time was 3 min, and the pre-treatment with phosphoric acid of 1 vol%. The carbon contents of stabilized rayon fabrics were increased with increasing stabilization temperature and time, whereas the oxygen contents were decreased. Also, it is likely that the pre-treatment with phosphoric acid plays a role in retarding the change of chemical structure of rayon fabric. The XRD result was quite consistent with the result showing the effect of phosphoric acid on the chemical composition, thermal shrinkage and weight reduction of rayon fabric.

• 소성∙가공
• /
• 제25권6호
• /
• pp.402-408
• /
• 2016

A manufacturing technology of carbon fiber composites with thermoplastic polymer pellets and continuous woven fiber was investigated using a compression molding process. To secure the impregnation of resin into the porosity of fabric the composite specimens were prepared with general injection-molding grade polypropylene pellets and low viscosity polycarbonate pellets. Tensile tests of polypropylene and polycarbonate composites were performed. Polycarbonate composites showed higher fracture strength than that of polypropylene composites because of the difference of matrix properties. However, the increase rate of strength was lower than that of polypropylene composites due to the difference of coherence between matrix and reinforcement. To investigate the effect of carbon fiber volume fraction on the fracture strength variation polypropylene composites with different volume fraction were compression molded and tensile tests were performed together. It was shown that the fracture strength of the polypropylene composites increased by 3.2, 5.4 and 6.9 times with the increase of carbon fabric volume fraction of 0.256, 0.367, and 0.480, respectively.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2007년도 학술발표회 논문집
• /
• pp.545-546
• /
• 2007

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.178-181
• /
• 2004

In this work, the carbon fabric reinforced phenolic composite is applied for heavy-duty journal bearings. The through thickness compressive strength (TTCS), which is one of the most important characteristics for the bearing material, is measured and analyzed with respect to the stacking sequence and composite thickness. Also, the coefficient of thermal expansion (CTE) and thermal conductivity of the composite in the thickness direction were measured with respect to stacking sequence.

• Composites Research
• /
• 제22권1호
• /
• pp.15-21
• /
• 2009

본 논문에서는 편향각을 갖는 직물 복합재료 시편을 제작하여 정적 압축실험과 피로실험을 수행하고 그 결과를 비교하였다. 직물구조의 차이에 따른 압축거동을 평가하기 위해 동일한 섬유와 기지로 구성된 일방향 복합재료와 평직 복합재료의 적층순서를 동일하게 조절한 시편을 준비하였다. 정적 압축실험을 통해 편향각을 갖는 시편의 강성과 강도를 측정하였고, 측정된 강도를 바탕으로 압축강도 예측식을 제안하였다. 피로실험을 통해 복합재료의 직물 구조의 차이에 의한 피로수명의 변화를 관찰하였으며, 편향각의 변화와 하중조건에 따른 피로수명의 차이를 비교하였다.

• 한국염색가공학회지
• /
• 제10권6호
• /
• pp.55-66
• /
• 1998

In order to investigate the detergency effects of various detergents to stained polyester & cotton fabric with solid soils such as carbon black, liquid paraffin and fat, the optimum washing conditions according to the types of washing agent, the assesment of detergency effect by the measurement of reflectance after and before washing were studied. The detergency effect of various detergents to stained polyester and cotton fabric increased by using the mixtures of bleaching and enzyme detergent. In order to obtain the excellent detergency effect, 2-step treatment, the pre-washing with bleaching agent and bleaching-enzyme mixture detergent treatment is preferred. In comparison of the detergency to polyester and cotton fabric, it is assumed that the detergency to polyester stained fabric was superior than that to cotton stained fabric because of the difference of adhesive force between soil material and fabric in preparing solid stained fabric.

• 한국염색가공학회지
• /
• 제8권1호
• /
• pp.83-89
• /
• 1996

Carbon black has been used as a particulate soil to prepare artificial soiled fabrics for detergent study but it has two major defects. The one is the difficulty of quantitative analysis of carbon black for evaluate the detergency, the other is that there is no reliable correlation between the removal of carbon black and oily soil which is the major component of natural soil. In this study ferric oxinate was used as a particulate soil since it is in black color and can be soiled on fabric by suspension in water or by solution in chloroform and it is easily analysed quantitatively by extracting it from soiled fabric with chloroform to get correct value of soil removal. The characteristics of soil removal of ferric oxinate were compared with that of carbon black and Sudan black, an oil soluble dye, which had been proved that it's detergency correlated with that of oily soil The soil removal of ferric oxinate and Sudan black estimated from quantitative analysis and from K/S value were in good agreement whereas the result calculated by simple reflectance was consistently low. The soil removal of ferric oxinate was exceeded from that of carbon black without regard to surfactants, Triton and Las, but the effect of washing conditions such as temperature and washing time on soil removal of both soils with different suffactants showed no considerable difference. Though the soil removal of Sudan black was little effected by the conditions, the soil removal in Triton exceeded considerably that of in Las, which is the characteristic of oily soil. Thus the soil removal of Sudan black was in good agreement with ferric oxinate in Triton, a non-ionic surfactant, and with carbon black in Las, an artionic surfactant. We concluded that ferric oxinate is a more realistic model particulate soil for artificial soiled cotton fabric washed with non-ionic surfactant than carbon black.

• 한국기계가공학회지
• /
• 제18권1호
• /
• pp.59-64
• /
• 2019

In recent years, the HP-CRTM method, which has the ability to produce carbon fiber-reinforce plastic composites at high speeds, has come into the spotlight in the automotive parts industry, which demands high productivity. Multi-axial carbon fabric, an intermediate material used in this HP-CRTM molding process, consists of layered fibers without crimp, which makes it better in terms of tensile and shear strength than the original woven fabrics. The NCF (non-crimp fabric) can form the layers of the carbon fiber, which have different longitudinal and lateral directions, and ${\pm}{\theta}$ degrees, depending on the product's properties. In this research, preforms were made with carbon fibers of ${\pm}45^{\circ}$ and $0/90^{\circ}$, which were lamination structures under seven different conditions, in order to create the optimal laminated structure for automobile reinforcement center floor tunnels. Carbon fiber composites were created using each of the seven differently laminated preforms, and polyurethane was used as the base material. The specimens were manufactured in accordance with the ASTM D3039 standards, and the effect of the NCF lamination structure on the mechanical properties was confirmed by a tensile test.

• 한국추진공학회지
• /
• 제23권6호
• /
• pp.21-27
• /
• 2019

우주 항공용 노즐에 사용되는 셀룰로오스계 탄소 직물은 낮은 열전도도, 높은 내삭마 특성을 가지고 있다. 그러나 내염화 및 흑연화 공정에서 70~90% 중량이 감소하여 최종 탄소 직물 제조 시 수율이 낮은 단점이 있다. 본 연구에서는 리오셀 직물에 인계난연제로 인산(Phosphoric acid), 가교제로 시트르산(Citric acid)을 사용하여 전처리한 후 FT-IR, XRD, TGA 분석을 통하여 화학적 구조 및 열적 특성 변화를 확인하였다. 또한 리오셀 직물의 내염화 및 흑연화 후 중량을 측정하여 시트르산이리오셀 직물 수율 변화에 미치는 영향에 대하여 확인하였으며, 16 wt% 첨가 시 흑연화 수율이 8.1% 까지 증가하는 것을 확인하였다.

• 한국항공우주학회지
• /
• 제35권1호
• /
• pp.58-65
• /
• 2007

MMF 시험을 적용하여 혼합모우드 비율을 20%～90%의 범위 내에서 변화시키면서 탄소섬유직물/에폭시 복합재의 혼합모우드 층간파괴 거동을 조사하였다. 혼합모우드 층간파괴 거동을 예측하기 위해 NL점과 5% offset점에 근거한 혼합모우드 층간파괴 결정식을 제시하였다. 파단면 양상과 균열진전 거동은 이동식 현미경과 전자현미경을 통해 조사하였다. 연구결과에 따르면 혼합모우드 층간파괴 거동은 NL점에 근거한 경우 매개변수 m=1.5와 n=0.5, 5% offset점에 근거한 경우 매개변수 m=2와 n=3인 혼합모우드 층간파괴 결정식에 의해 잘 예측되어진다. 파단면 양상과 균열진전 거동은 혼합모우드 비율에 매우 민감하게 변하며 MMF 시험은 혼합모우드 층간파괴인성의 평가에 성공적으로 적용됨을 알 수 있었다.