Browse > Article
http://dx.doi.org/10.7234/kscm.2009.22.1.015

Compressive Characteristics of Composites According to the Micro-structure and Stacking angle  

Yoo, Seong-Hwan (중앙대학교 기계공학부)
Park, Seok-Won (중앙대학교 기계공학부)
Chang, Seung-Hwan (중앙대학교 기계공학부)
Publication Information
Composites Research / v.22, no.1, 2009 , pp. 15-21 More about this Journal
Abstract
In this paper, static compressive test and compression-compression fatigue test of carbon/epoxy composites which have different micro-structures were carried out with respect to the bias angle. In order to find out the effect of the micro-structure of the fabric composite on compressive characteristics the specimens made of UD carbon/epoxy composite comprising the same fiber and matrix system as the fabric composite were also prepared. The compressive strength and modulus were measured and these values were used to develop a semi-empirical formula for predicting compressive strength of the fabric composite with bias angles. The fatigue behavior of the fabric composite with respect to the bias angle variation was also investigated.
Keywords
Fabric composites; Bias angle; Static compressive test; Fatigue test;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 권종오, 이재규, 김효철, 김재성, "새로운 생산 시스템을 이용한 복합재료 선박의 시험 건조와 성능에 관한 연구," 대한조선학회 추계학술대회 논문집 2001, pp. 100-103
2 ASTM D 3410/3410M - 03, "Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading."
3 김영익, 최상민, "국내개방 항공기의 복합재료 적용사례," 한국복합재료학회지, Vol. 16, No. 1, 2003, pp. 68-74   과학기술학회마을
4 홍건호, 한복규, 김기수, "섬유 복합재료의 건설구조물 적용 기술," 한국복합재료학회지, Vol. 18, No. 5, 2005, pp. 40-46   과학기술학회마을
5 ASTM D695 -02a, "Standard Test Method for Compressive Properties of Rigìd Plastics."
6 Haberle, J. G. and Matthews, F. L., "The Influence of Test Method on the Compressive Strength of Several Fiber-reinforced Plastics," Journal of Advanced Materials, Vol. 25, No. 1, 1993, pp. 35-45
7 Fleck, N. A., "Compressive Failure of Fiber Composites," Advances in Applied Mechanics, Vol. 33, 1997, pp. 43-117   DOI
8 Chang, S. H., Sutchliffe, M. P. F. and Sharma, S. B., "Microscopic Investigation of Tow Geometry Changes ina Woven Prepreg Material during Draping and Consolidation," Composites Science and Technology, Vol. 64, 2004, pp. 1701-1707   DOI   ScienceOn
9 Hosur, M. V., Adya, M., Vaidya, U. K., Mayer, A. and Jeelani, S., "Effect of stitching and weave architecture on the high strain rate compression response of affordable woven carbon/epoxy composites," Composite Structures, Vol. 59, 2003, pp. 507-523   DOI   ScienceOn
10 Tan, S. C., " Stress Analysis and the Testing of Celanese and IITRI Compression Specimens," Composite Science and Technology, Vol. 44, No. 1, 1992, pp. 57-70   DOI   ScienceOn
11 Reifsnider, K. L. and Mirzadeh, F., "Compressive strength and mode of failure of 8H Celion 3000/PMRI5 woven composite material," Journal of Composites Technology & Research, Vol. 10, No. 4, 1998, pp. 156-164   DOI   ScienceOn
12 김성집, 장승환, "편향각과 전단각이 탄소섬유/에폭시 평직 복합재료의 압축특성에 미치는 영향," 대한기계학회논문집(A), Vol. 30, No.7, 2006, pp. 68-74   과학기술학회마을   DOI   ScienceOn
13 Cornelia E. Demers, " Fatigue strength degradation of E-glass FRP composites and carbon FRP composites," Construction and Building Materials Vol. 23, 1998, pp. 311-318   DOI   ScienceOn
14 Daniel, I. M., Hsiao, H. W. and Wooh, S. C., "Failure mechanisms in thick composites under compressive loading," Composites Part B: Engineering, Vol. 27, No. 6, 1996, pp. 543-552   DOI   ScienceOn
15 Marie-Laetitia Pastor, Xavier Balandraud, Michel Gre'diac, Jean-Louis Robert, "On the fatigue response of aluminium specimens reinforced with carbon epoxy patches," Composite Structures Vol. 83, 2008, pp. 237-246   DOI   ScienceOn
16 Jen, M. H. R. and Lee, C. H., "Strength and life in thermoplastic composite laminates under static and fatigue loads. Part 1: Experimental," International journal of fatigue, Vol. 20, No. 9, 1998, pp. 605-615   DOI   ScienceOn
17 이상진, 정종철, 오경원, 조세현, 목재균, "복합재료를 적용한 도시형 연료전지 고무차륜 Tram 시스템 및 차체 제작기술 개발," 한국복합재료학회지, Vol. 18, No. 2, 2005, pp. 59-64   과학기술학회마을