• Journal of Practical Agriculture & Fisheries Research
• /
• 제17권1호
• /
• pp.93-100
• /
• 2015

This study was performed to examine the high temperature adaptability with CO₂ treatment for tomato under the condition of greenhouse cultivation during summer season. The indoor condition of CO₂ concentrations were controlled as control, 500 ppm, and 1,000 ppm for the greenhouse with the maximum air temperature of 44℃. With the observation of VPD (vapor pressure deficit) and CWSI (crop water stress index) by leaf-air temperature difference according to CO₂ treatment concentration, the plants with the CO₂ concentration of 1,000 ppm performed less water stress than those with the CO₂ concentrations of control and 500 ppm. The plants without CO₂ treatment performed the severest degree of water stress.

• Transactions of the Korean hydrogen and new energy society
• /
• 제17권4호
• /
• pp.425-433
• /
• 2006

Sepiolite was selected as a mineral carbonation candidate ore for carbon dioxide sequestration. Carbonation salt formation from alkaline earth metal ingredient needs to dehydroxylation of sepiolite at high temperature. An evident dehydroxylation was observed over $800^{\circ}C$ and the variations of sepiolite characteristics after high temperature treatment was synthetically evaluated. Remarkable weight loss were measured after high temperature thermochemical reaction then crystallographic and spectroscopic changes were analyzed. The resulted alkaline earth metal oxides could explained by dehydroxylation based on thermochemical reaction.

• Transactions of the Korean hydrogen and new energy society
• /
• 제18권3호
• /
• pp.301-308
• /
• 2007

Silicate mineral serpentine with magnesium and calcium was selected as a mineral carbonation mediators for carbon dioxide storage. Serpentine has various metallic elements as an oxides form of magnesium, iron, calcium, aluminium etc. Magnesium and calcium could be carbonation salt preferentially than other metal component within serpentine. Systemic thermochemical treatment for serpentine could change physicochemical properties like a surface area and pore dimensions. Due to the rapid chemical reaction rate depended on dimensional values, carbonation formation could determined by surface property change of thermochemical treated serpentine.

• Journal of Acupuncture Research
• /
• 제32권4호
• /
• pp.195-201
• /
• 2015

Objectives : The purpose of this study is to report on the improvement of respiratory function of a fascioscapulohumeral muscular dystrophy patient after receiving Korean medical treatment. Methods : This study was carried out on a 60 year-old male patient who suffered from fascioscapulohumeral muscular dystrophy. While we carried out Korean medical treatment, we observed $EtCO_2$ (end-tidal carbon dioxide), Vte (exhaled tidal volume) and PIP (peak inspiratory pressure). Results : $EtCO_2$ count decreased from 34 mmHg to 24 mmHg during the treatment period, and PIP count became stable. Vte count also did not worsen in this study. Conclusions : Based on this study, we concluded that Korean medical treatment could be effective in treating fascioscapulohumeral muscular dystrophy patients with respiratory failure.

• Journal of Sensor Science and Technology
• /
• 제15권1호
• /
• pp.13-19
• /
• 2006

The micro-gas sensor based on carbon nanotubes (CNTs) was fabricated and its gas sensing characteristics on nitrogen dioxide ($NO_{2}$) have been investigated. The sensor consists of a heater, an insulating layer, a pair of contact electrodes, and CNT-sensing film on a micromachined diaphragm. The heater plays a role in the temperature change to modify sensor operation. Gas sensor responses of CNT-film to $NO_{2}$ at room temperature are reported. The sensor exhibits a reversible response with a time constant of a few minutes at thermal treatment temperature of $130^{\circ}C$.

• Journal of Electrochemical Science and Technology
• /
• 제14권2호
• /
• pp.131-138
• /
• 2023

The carbon felt is usually hired as electrodes for vanadium redox flow battery (VRFB). In the study, surface modification of carbon felt under CO₂ atmosphere with variables of operating various temperature ranges between 700℃ and 900℃. The qualitative and quantitative analysis were carried out such as scanning electron microscope (SEM) and X-ray photoelectron spectroscopy (XPS) to observe degree of surface modification. Result of XPS analysis confirmed increase of carbon and oxidation functional group on the surface with increase of temperature. SEM image was discovered similar phenomena. Electrochemical characteristics such as cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) revealed the improved electrode performance with increase of temperature. However, the electrochemical performance under treatments temperature of 900℃ was less than that of under treatment temperature of 850℃ due to weight loss at the treatment temperature of 900℃. From the CV and EIS results, the best electrochemical characteristics was at the temperature of 850℃. That of at the temperature of 900℃ was decreased due to weight loss. The energy efficiencies (EE) obtained from full cell test were 69.37, 80.76, 82.45, and 75.47%, at the temperature of 700, 800, 850, and 900℃, respectively.

• Journal of Climate Change Research
• /
• 제6권4호
• /
• pp.367-377
• /
• 2015

This study analyzed the effectiveness of China's policy to reduce of sulfur dioxide. China's $12^{th}$ Five-year plan on national economic and social development emphasized environmental protection and low-carbon economic development. Sulfur dioxide was one of the major gases to affect air pollution and climate change and its control became a key policy agenda in the environment and energy sector. As the absolute amount of sulfur dioxide emissions in China came from the industrial sector, the control of the coal-based energy was especially urgent. This study analyzed the factors that influenced the sulfur dioxide emissions and the policy effects to reduce sulfur dioxide in China from 2003 to 2012 based on regional data. The air pollution treatment investments showed the biggest impact together with energy conservation policy in reducing sulfur dioxide emissions. However, pollutant emissions charge did not show a relevant policy effectiveness in all regions as the amount of charge would be smaller than economic benefit from non-compliance. Rationalizing pollutant emissions charge is, therefore, a key policy task for further reduction of sulfur dioxide emissions.

• Journal of Korean Society of Water and Wastewater
• /
• 제22권3호
• /
• pp.373-378
• /
• 2008

The pH & alkalinity adjustment method by lime and carbon dioxide($CO_2$) for corrosion control in water distribution system was investigated to determine the optimum operational condition in lime adding process in water treatment plant(WTP). The mixing time at dissolution tank and sedimentation time at saturator for maintaining optimal turbidity condition of lime supernatant were 60~75 minutes and 75~95 minutes, respectively. There was no difference according to $CO_2$ adding methods such as $CO_2$ saturated water or $CO_2$ gas. But, $CO_2$ saturated water could be convenience at WTP in terms of pH control and quantitative dosing. To minimize generation of calcium carbonate products, the short time interval between adding of lime and $CO_2$ is most important. The lime should be added below 32 mg/l for preventing pH rising and generation of calcium carbonate products at the heating condition.

• Journal of Veterinary Science
• /
• 제21권2호
• /
• pp.37.1-37.5
• /
• 2020

Poultry red mites (PRMs), Dermanyssus gallinae, are one of the most harmful ectoparasites of laying hens. Because of their public health impact, safe, effective methods to eradicate PRMs are greatly needed. Carbon dioxide (CO₂) was shown to eradicate phytophagous mites; however, there is no evidence that PRMs can be eradicated by CO₂. Thus, the efficacy of CO₂, applied by direct-spraying and dry ice-generated exposure, for eradicating PRMs was investigated. Both treatments eradicated > 85% of PRMs within 24 h and 100% of PRMs by 120 h of post-treatment. Therefore, these novel approaches may be useful for eradicating PRMs in clinical settings.

• Journal of Environmental Science International
• /
• 제12권9호
• /
• pp.1005-1010
• /
• 2003

For the purpose of surveying any possibility of anchoring titanium dioxide on activated carbons to promote their activities as catalysts and/or adsorbents, two activated carbons were oxidized with ammonium peroxydisulfate and followed by anchoring titanium dioxide. The anchoring of titanium dioxide on the oxidized activated carbons were performed via the adsorption of tetrabutyltitanate, hydrolysis with deionized water, and calcination. The effect of oxidizing and anchoring treatment on the surface element composition, surface area, and pore texture were analyzed by XPS, BET and TPD. The oxidation of activated carbons with ammonium peroxydisulfate introduced carboxyl groups on the surface of activated carbons and these carboxyl groups promoted the anchoring of titanium oxide on the activated carbons. However, the treatments affected the surface area and the porosity of activated carbons.