• 한국환경과학회지
• /
• 제29권7호
• /
• pp.703-713
• /
• 2020

In this study, carbon dioxide concentration and air temperature at different elevations were observed and analyzed in the upper atmosphere of mud flat and reed beds at low tide in Suncheon Bay. The carbon dioxide concentration and air temperature sensors were mounted on the drone, and the carbon dioxide concentration and air temperature by altitude (5 m, 10 m, 20 m, 40 m) at five points in the tidal flat and reed beds were observed in the morning and afternoon. The carbon dioxide concentrations in the upper atmosphere of the tidal flat ranged from 453.0 to 460.2 ppm in the morning and 441.6 to 449.7 ppm in the afternoon. The carbon dioxide concentrations in the upper atmosphere of the reed beds ranged from 448.9 to 452.4 ppm in the morning and 446.0 to 454.4 ppm in the afternoon. The carbon dioxide concentrations in the upper atmosphere of the tidal flat was higher in the morning than in the afternoon, and the carbon dioxide concentration decreased as the altitude increased. The carbon dioxide concentration in the upper atmosphere of the reed beds was similar in the morning and afternoon at all altitudes, and the carbon dioxide concentration decreased as the altitude increased. The correlation coefficient between carbon dioxide concentration and air temperature observed in the tidal flat in the morning was -0.54 ~ -0.77, and the correlation coefficient between carbon dioxide concentration and air temperature observed in the afternoon was 0.56 ~ 0.80. The correlation coefficient between carbon dioxide concentration and temperature observed in the morning in the reed field was low, below 0.3, and the correlation coefficient between carbon dioxide concentration and air temperature observed in the afternoon was 0.35 ~ 0.77. In the upper atmosphere of the tidal flats and reed beds, the linear function was suitable for the change of carbon dioxide concentration as a air temperature, and the coefficient of determination of the estimated linear function was higher in the afternoon than in the morning. Through this study, it was confirmed that the carbon dioxide concentration in the upper atmosphere of the tidal flat and the reed beds was different, and the increase rate of carbon dioxide concentration in the upper atmosphere of the tidal flat and the reed beds was higher in the afternoon than in the morning.

• 생물환경조절학회지
• /
• 제30권4호
• /
• pp.312-319
• /
• 2021

본 연구는 CO₂ 상승 처리에 따른 복숭아 '미홍' 품종의 수체생육 및 생리반응에 미치는 영향을 알아보고자 수행하였다. CO₂ 농도는 기후변화 시나리오 RCP8.5를 기반하여 400µmol·mol^-1(현재), CO₂ 상승구 700µmol·mol^-1(21C 중반기), 940µmol·mol^-1(21C 후반기)으로 4월 22일부터 7월 6일까지 처리하였다. 5월 22일부터 7월 2일까지의 최대광합성률 평균값은 700µmol·mol^-1 처리구에서 16.06µmol·CO₂·m^-2·s^-1으로 대조구 14.45µmol·CO₂·m^-2·s^-1와 940µmol·mol^-1 처리구의 15.96µmol·CO₂·m^-2·s^-1보다 높았다. 그러나 기공전도도는 대조구보다 700µmol·mol^-1 및 940µmol·mol^-1 처리구에서 낮았다. 또한 모든 처리구에서 CO₂ 포화점은 생육 초기 1,200µmol·mol^-1에서 생육 후기 600-800µmol·mol^-1으로 낮아졌다. 기공 밀도는 CO₂가 상승할수록 감소하였다. 수체생육 중 직경증가량, 엽면적, 신초 수는 통계적 유의차가 없었지만, 신초 길이는 CO₂가 상승할수록 짧아졌다. 과중은 700µmol·mol^-1(152.5g), 940µmol·mol^-1(147.4g), 400µmol·mol^-1(141.8g) 처리구 순으로 높았다. 가용성 고형물 함량은 대조구인 400µmol·mol^-1 처리구보다 CO₂ 상승 처리구에서 유의적으로 증가하였다. 이상의 결과들을 종합하면 700µmol·mol^-1 까지의 CO₂ 상승은 복숭아 '미홍'의 수량과 가용성 고형물 함량 등 과실 품질에 긍정적인 영향을 주는 반면, 940µmol·mol^-1 이상의 CO₂ 상승은 조기 노화 및 착과 부위 감소 등 복숭아 생산성에 부정적인 영향을 미치는 것으로 판단된다.

• 상하수도학회지
• /
• 제22권3호
• /
• pp.379-387
• /
• 2008

The pH & alkalinity adjustment method by lime and carbon dioxide($CO_2$) for corrosion control in water distribution system was investigated to evaluate the corrosion characteristics of metal pipes, such as galvanized iron, copper, stainless steel, and carbon steel. When the pH in sand filtered and ozone+GAC treated water was increased with lime and $CO_2$ from 7.5 to 8.0, the concentration of residual chlorine decreased at higher pH and longer reaction time; the concentration of trihalomethane increased. The corrosion rate of coupons with corrosion control using lime and carbon dioxide was showed much smaller than those without corrosion control using pilot-scale simulated distribution system. The galvanized iron was corroded much faster than carbon steel, copper, and stainless steel. Especially, copper and stainless steel coupons were hardly corroded. The galvanized iron and carbon steel coupons with corrosion control were produced the corrosion products less than those without corrosion control by the results of environmental scanning electron microscope(ESEM) and energy dispersive x-ray spectroscopy(EDS) analyses. The galvanized iron coupon with pH and alkalinity adjustment by lime and carbon dioxide was detected about 30 percent of zinc, when the carbon steel was detected about 30 percent of calcium by calcium carbonate products formation. For the results of X-ray diffraction(XRD) analyses, the goethite(${\alpha}$-FeOOH) was identified as primary corrosion product of galvanized iron without corrosion control, while the Zinc oxide(ZnO) was found on corrosion products of galvanized iron coupon with corrosion control as the results of EDS analyses. However, the carbon steel corrosion products regardless of corrosion control were composed predominantly of maghemite(${\gamma}-Fe_2O_3$) and hematite(${\alpha}-Fe_2O_3$).

• KSBB Journal
• /
• 제16권1호
• /
• pp.95-98
• /
• 2001

순수한 초임계 이산화탄소로는 대두박으로 부터 daidzein을 추출할 수 없었다. 보조용매로서 에탄올을 사용하면 daidzein을 추출이 가능하였다. 에탄올을 보조용매로 사용한 경우 온도가 증가할수록 daidzein의 추출 효율도 증가하였고, 압력이 증가할수록 추출 효율 역시 증가하였다. 에탄올을 보조용매로 사용하는 경우에 보조용매의 농도가 증가할수록 추출 효율도 비레하여 증가하였고 19% 이상에서는 추출 효율이 완만하게 증가하였다. 보조용매 농도가 15% 이상부터는 보조용매 농도가 증가할수록 daidzein함량은 감소하는 경향을 나타내었다. 보조용매 농도가 15%에서 93% 추출 효율을 나타냈다. 추출시간에 따른 추출 효율의 변화를 연구한 결과, 초기에는 추출 효율이 급격하게 증가하다가 후반부터는 완만하게 증가하는 즉, 포화현상을 나타내었다. 추출시간에 따른 추출된 daidzein함량의 변화는 뚜렷한 경향은 없지만, 대체적으로 추출시간이 증가할수록 감소하는 경향을 나타내었다.

• 융합보안논문지
• /
• 제14권4호
• /
• pp.101-108
• /
• 2014

최근 클라우드 컴퓨팅 기술은 전 세계적으로 중요한 이슈로 부각되고 있으며, 이산화탄소 배출을 경감하는 것으로도 많은 주목을 받고 있다. 그러나 클라우드 컴퓨팅의 탄소배출은 긍정적인 측면과는 달리, 여러 취약점들로 인해, 경감정도에 차이를 갖고 있다. 따라서 본 논문은 클라우드 컴퓨팅의 이산화탄소 배출과 관련한 보안 시스템의 배출량 측정 실험과 클라우드 이산화탄소 배출 관련 사례연구를 통해 배출 요인을 분석함으로써, 향후, 클라우드 컴퓨팅의 보안 설계와 성능 향상을 위한 자료로 활용될 것으로 기대한다.

• 한국대기환경학회지
• /
• 제29권1호
• /
• pp.56-63
• /
• 2013

This study was aimed at developing and evaluating a diffusive sampling method using a barium hydroxide solution as an absorbent for measuring carbon dioxide ($CO_2$) in ambient air. The collected $CO_2$ concentration was calculated by the change of conductivity resulted in the reaction of $CO_3{^{2-}}$ and $Ba^{2+}$ in aqueous solution. The sampling rate for the diffusive sampler was determined 0.218 mL/min, as obtained from the slope of the linear correlation between the $CO_2$ mass collected by the diffusive sampler and the time-weighted $CO_2$ concentration with the active sampling method. The unexposed blank sampler sealed in aluminium foil-polyethylene laminated packets has remained stable during at least one-month storage period. A good correlation was observed between the diffusive sampler and active sampler with a coefficient of determination of 0.956. This diffusive sampler would be suitable for the indoor $CO_2$ concentration monitoring.

• 자원리싸이클링
• /
• 제23권4호
• /
• pp.37-46
• /
• 2014

건설 분야 중 건설 재료와 건자재 산업에서 발생하는 $CO_2$는 약 6,700만톤으로 건설 분야에서 발생하는 $CO_2$의 약 30 %를 점유하고 있다. 건설 분야에서 $CO_2$ 저감은 건자재 산업에서 $CO_2$를 발생시키는 2차, 3차 양생을 줄여 소비되는 화석연료 사용과 배출가스 저감의 조절이 필수적이다. 따라서 본 연구는 시멘트 결합재를 기초로 하여 결합재를 40 % 까지 대체하여 모르타르를 제조한 후 양생방법을 달리하여 응결 및 강도 특성을 분석하였다. 결합재 치환율에 따른 강도 특성 결과 증기양생 후 고로슬래그와 CSA 15%, CAMC 5%를 치환한 시험체의 강도 증진이 활발하였다. 특히 고로슬래그 50%, CSA 15%, CAMC 5%를 치환한 시험체가 가장 높게 강도가 증진되었다. 하지만 CAMC 10%의 경우 열팽창에 의한 균열과 온도차에 의한 건조수축, 과도하게 생성된 에트린가이트에 의해 강도가 저하되는 결과를 가져왔다.

• 센서학회지
• /
• 제31권5호
• /
• pp.343-347
• /
• 2022

Recently, the problem of global warming caused by greenhouse gases is getting serious due to the development of industry and the increase in transportation means. Accordingly, the need for a technology to reduce carbon dioxide, which accounts for most of the greenhouse gas, is increasing. Among them, a catalyst for converting carbon dioxide into fuel is being actively studied. Catalysts for reducing carbon dioxide are classified into thermal catalysts and photocatalysts. In particular, the photocatalyst has the advantage that carbon dioxide can be reduced only by irradiating ultraviolet rays at room temperature without high temperature or additional gas. TiO₂ is widely used as a photocatalyst because it is non-toxic and has high stability, but has a disadvantage of low carbon dioxide reduction efficiency. To increase the reduction efficiency, 1-propanol was used in the synthesis process. This prevents agglomeration of the catalyst and increases the specific surface area and pores of TiO₂, thereby increasing the surface area in contact with carbon dioxide. As a result of measuring the CO₂ reduction efficiency, it was confirmed that the efficiency of TiO₂ with 1-propanol and TiO₂ without 1-propanol was 19% and 12.3%, respectively, and the former showed a 1.5 times improved efficiency.

• 한국환경과학회지
• /
• 제28권9호
• /
• pp.785-795
• /
• 2019

In order to analyze the sensitivity of carbon dioxide flux by soil temperature in the grassplot, carbon dioxide flux and soil temperature were observed 24 times from March, 2010 to March, 2011 at nine sites in the grassplot. The average of $CO_2$ in the grassplot is $2.2{\sim}36.7^{\circ}C$, the highest in August, the lowest in January, and the average of carbon dioxide flux is $12{\sim}1479mgCO_2{\cdot}m^{-2}{\cdot}hr^{-1}$, and the carbon dioxide emission from the grassplot to the atmosphere was 10 times higher in summer than in winter. The temperature response coefficient estimated by the exponential function of carbon dioxide flux according to soil temperature was ranged from 0.1065 to 0.1274, and the increase tendency of $CO_2$ flux with soil temperature was linear at $0{\sim}20^{\circ}C$ and exponential at $20{\sim}40^{\circ}C$. The $Q_{10}$ values for each of nine observation sites on the grassplot was in the range of 2.901 ~ 3.575, and the $Q_{10}$ value using the total data observed in the lawn was estimated to be 3.374. In the homogeneous grassplot area, the average of $Q_{10}$ values by observation point and the $Q_{10}$ value by the total data were estimated similarly.

• 한국해양공학회지
• /
• 제22권6호
• /
• pp.88-94
• /
• 2008

The concentration of atmospheric carbon dioxide (CO2), which is one of the major greenhouse gases, continues to rise with the increase in fossil fuel consumption. In order to mitigate global warming the amount of CO2 discharge to the atmosphere must be reduced. Carbon dioxide capture and storage (CCS) technology is now regarded as one of the most promising options. To complete the carbon cycle in a CCS system, a huge amount of captured CO2 from major point sources such as power plantsshould be transported for storage into the marine or ground geological structures. Since 2005, we have developed technologies for marine geological storage of CO2,including possible storage site surveys and basic design of CO2 transport and storage process. In this paper, the design parameters which will be useful to construct on-shore and off-shore CO2 transport systems are deduced and analyzed. To carry out this parametric study, we suggested variations in thedesign parameters such as flow rate, diameter, temperature and pressure, based on a hypothetical scenario. We also studied the fluid flow behavior and thermal characteristics in a pipeline transport system.