• Journal of Korean Society of Transportation
• /
• v.20 no.5
• /
• pp.113-130
• /
• 2002

In this paper, we developed DNL(Dynamic Network Loading) model based on Moving cell theory to analyze the dynamic characteristics of traffic flow in congested network. In this paper vehicles entered into link at same interval would construct one cell, and the cells moved according to Cell following rule. In the past researches relating to DNL model a continuous single link is separated into two sections such as running section and queuing section to describe physical queue so that various dynamic states generated in real link are only simplified by running and queuing state. However, the approach has some difficulties in simulating various dynamic flow characteristics. To overcome these problems, we present Moving cell theory which is developed by combining Car following theory and Lagrangian method mainly using for the analysis of air pollutants dispersion. In Moving cell theory platoons are represented by cells and each cell is processed by Cell following theory. This type of simulation model is firstly presented by Cremer et al(1999). However they did not develop merging and diverging model because their model was applied to basic freeway section. Moreover they set the number of vehicles which can be included in one cell in one interval so this formulation cant apply to signalized intersection in urban network. To solve these difficulties we develop new approach using Moving cell theory and simulate traffic flow dynamics continuously by movement and state transition of the cells. The developed model are played on simple network including merging and diverging section and it shows improved abilities to describe flow dynamics comparing past DNL models.

• Journal of The Korean Association For Science Education
• /
• v.33 no.3
• /
• pp.581-596
• /
• 2013

The aim of this study was to identify students' views on the orientation of science and to investigate the relationship between their views and decision-making on socio-scientific issues (SSI). In this study, 27 university students attending a science course were asked to discuss four controversial issues: the Toyota recall, the green car, the global warming and swine influenza (influenza A (H1N1)). The study was comprised of two stages. At the first stage, we examined students' views on the nature of science and on the orientation of science with the open-ended questionnaire based on VNOS and VOSTS. While they held relatively similar views on the nature of science, their views on the orientation of science were distinct as pragmatic, intrinsic, communal and ethical views. At the second stage, to examine the role of their views on the orientation of science in decision-making, we selected four students who had similar views on NOS but different views on the orientation of science. The four students were selected from each group of views on the orientation of science and their decision-making processes were analyzed following grounded theory. Across SSIs, they relied upon their views on the orientation of science as the strategies for decision, though considered different perception, and causal and contextual conditions. This study indicates that understanding students' views on the orientation of science would be helpful for achieving scientific literacy for informed decision.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.3 no.1
• /
• pp.31-46
• /
• 1978

Consider a time interval during which the demand for trips is fixed (e.g. the rush hour period). The traveller has a choice between various public modes, whose travel times and fares are fixed, and the automobile mode, for which travel time and cost depend on the volume of traffic flow on those roads, which are subject to congestion. We consider the equilibrium in terms of a representative travellerm, who choses for any trip the mode and route with the least combined money and time cost. When several (parallel) model or routes are chosen, then the combined cost of money and time must be equal among these. Our problem is first, to find the optimal flows of cars and of public mode carriers on the various links of their networks and second the optimal fares for trips by the variousmodes. The object is to minimize the total operating costs of the carriers and car plus the total time costs to travellers. The optimal fares are related to, but not identical with the dual variables of the underlying Nonlinear Program. They are equal to these dual variables only in the case, when congestion tolls on trips or on the use of specific roads are collected from automobile users. When such tolls are not collected, they must be passed on as subsidies to travellers using competing modes. The optimal fares of public modes are then reduced by the amounts of these subsidies. Note that subsidies are not a flat payment to public carriers, but are calculated on the basis of tickets sold. Fares and subsidies depend in general on tile period considered. They will be higher during periods of higher demand. When the assumption of fixed trip demand is relaxed, this tare system is no longer best, but only second best since too much traffic will, in general, be generated. The Free Rider Theorem states the following : Suppose road tolls can be charged, so that a best pricing system for public modes is posssible. Then there may exist free rides on some routes and modes, but never on a complete round trip.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.10
• /
• pp.693-698
• /
• 2017

The 18650 battery cell is known to be reliable and cost effective, but it has a design limitation and low electric capacity compared to pouch-type cells. Because its economy is superior, an 18650-cell-type battery pack is chosen. A reliable temperature is very important in automobile battery packs. Therefore, in this study, the temperature stability of the battery pack is predicted using CFD simulation. Following 3C discharge tests, the results for the heat generation of the battery cell are compared to the simulation results. Based on these results, a natural convection condition, forced convection condition, direct cell-cooling condition, cooling condition on the upper and lower surfaces of the battery pack, and cooling condition using air channels are all simulated. The results indicate that the efficiency and the performance of the air-channel-type cooling system is good.

• Tribology and Lubricants
• /
• v.30 no.3
• /
• pp.189-198
• /
• 2014

This paper presents the results of an experimental investigation of the correlation between the lubrication characteristics of an engine and its fuel economy. Improving the lubrication characteristics of the engine oil is one of the most efficient ways to improve a car's fuel economy. The methods to accomplish this include lowering the viscosity, adding a friction modifier and optimizing the shear stability index of a viscosity index improver. In addition, it is necessary to use different methods to reduce the friction to individual lubrication areas, because different lubrication regimes are used for different engine parts. The experimental investigation in this study is based on design of experiments ; this paper presents the results of a modified Sequence VID test, which is an ASTM standard test used to measure the effects of automotive engine oils on the fuel economy of passenger cars. The results demonstrate the effects of the following lubrication factors on the fuel economy : the low temperature cranking viscosity, high-temperature high shear (HTHS) viscosity, friction modifier, polymer type and shear stability index of the viscosity index improver. Moreover, this study involves an analysis of variance based on design of experiments. The test results show that the HTHS viscosity, friction modifier and shear stability index of the viscosity index improver are more effective than the other factors. Therefore, lowering the viscosity, adding a friction modifier and optimizing the shear stability index of a viscosity index improver should be considered to improve fuel economy.

• Journal of Chest Surgery
• /
• v.41 no.5
• /
• pp.633-635
• /
• 2008

Cardiac rupture after blunt chest trauma is a relatively uncommon diagnosis, and it is associated with a very high mortality rate. A 41-years-old man crashed his car into a guardrail and he was then transported to hospital. Although unstable vital signs are the most common symptoms of cardiac injury, this patient had stable vital signs. The chest CT scan showed pericardial effusion, and echocardiography did not clearly reveal cardiac tamponade, but the right atrium was slightly collapsed. Cardiac injury was suspected, and surgery was commenced for obtaining the diagnosis and treatment. A 2cm laceration at the junction of the left atrium and the lefl inferior pulmonary vein was discovered and this was repaired with $4{\sim}0$ Polypropylne monofilament sutures. We report here on the successful management of a patient with left atrial rupture following blunt chest trauma.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.3
• /
• pp.1-7
• /
• 2010

Recently, the vehicle driving device has been designed for driver's convenience. Especially, the automobile industry develops the vehicle using the joystick instead of steering wheel from the concept car. The biggest strength of using the joystick is that the driver feels less workload and fatigue than when the driver uses steering wheel. However, this kind of study still needs more research and experiments for more accurate result. Therefore, this research evaluated workload according to the driving device by the survey and the measurement of physiological signal. The reason not only using the survey also using the measurement of physiological signal is to support the result of the survey which is not enough to bring the accurate result. There were tow different kinds of methods to carry out this research; SWAT (Subjective Workload Assessment Technique) for the survey and the biopac equipment for the measurement of physiological signal. Furthermore, previously established driving simulator, GPS (Global Positioning System), and Seoul-Cheonan virtual expressway DB were used for the experiment. As the result of the experiment with 13 subjects, it was certain that using joystick device brings less workload and fatigue to the drivers than using steering wheel following both methods-the survey and the measurement of physiological signal. Also, it confirmed the significant result from the SPSS (Statistical Package for the Social Sciences) statistics analysis program.

• Journal of Korean Society of Transportation
• /
• v.18 no.5
• /
• pp.57-67
• /
• 2000

Two fuzzy travel time estimators for interrupted traffic flow were developed based on field survey data and simulation data 7hat is collected from DETSIM, which is microscopic traffic simulation model that car-following theory is applied. One is FETTOS(Fuzzy Estimator of Travel Time using Occupancy and Spot speed) and the other is FETTOS(Fuzzy Estimator of Travel Speed using Volume and Occupancy). Fuzzy logic controller was applied to the estimators to deal with non-linear relationship between traffic variables and travel time. According to results of simulation and field survey. estimation of travel time can be modeled by using percent occupancy better than any other traffic variables. Detector location from storyline and signal timing Plan of intersection are affected to estimate travel time. With a few findings, the estimator was constructed and its performance was tested for observed travel time data and simulated data. FETTOS which needs signal timing plan and detector location estimates travel time with accurate better than FETSVO does. However. FETSVO has excellent transferability because the estimator needs set of input data only; volume and time mean speed.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.5
• /
• pp.188-194
• /
• 2014

The feature extraction mechanism of the CASA(Computational Auditory Scene Analysis) system uses time continuity and frequency channel similarity to compose a correlogram of auditory elements. In segmentation, we compose a binary mask by using cross-correlation function, mask 1(speech) has the same periodicity and synchronization. However, when there is delay between autocorrelation signals with the same periodicity, it is determined as a speech, which is considered to be a drawback. In this paper, we proposed an algorithm to improve discrimination of channel similarity using Weighted Cross-correlation in segmentation. We conducted experiments to evaluate the speech segregation performance of the CASA system in background noise(siren, machine, white, car, crowd) environments by changing SNR 5dB and 0dB. In this paper, we compared the proposed algorithm to the conventional algorithm. The performance of the proposed algorithm has been improved as following: improvement of 2.75dB at SNR 5dB and 4.84dB at SNR 0dB for background noise environment.

• Journal of the Korean Institute of Rural Architecture
• /
• v.17 no.1
• /
• pp.73-81
• /
• 2015

The purpose of this study is to analyze the approach characteristics, relation to other facilities, and current status focusing on 28 total of exhibition-culture facilities in Gangneung. The results are following as. First, 19 facilities are located in urban area and nine are located in country side. With locational characteristics of Gangneung which is mountains in west and sea to east, three are located in high hill side and four are in sea shore among nine facilities. Facilities in urban area converge to Gungpodae and Ojukhuk which are symbol space in Gangneung. Those facilities started to have been increased from 1990s and rapidly increased from 2000s. The reason is that people have been interested in culture and art in society in general. In building structure, buildings related with traditional contents were constructed with wooden structure while buildings have been mainly constructed with modern ways such as steel and reinforced concrete structure. Second, the 28 facilities are classified into three types by function of other space or facilities within same a site or a building. The three types are themselves usage only, multi-function, and park type. The multi-function type is re-classified into two; public type and commercial type. Those functions have changed according to changes of society and times. Finally, for approaching to the exhibition-culture facilities with general transportation, the mean distance from the closest bus stop to those facilities each is 280m and 27 facilities are located within 670m from the closest bus stop. For approaching way using by car creates movement along road-building site-parking space-main entrance of building. When based on main entrance by the movement, parking space located in front side of main entrance is the largest, next is in the side, and the least is in back side. Various factors such as approaching form from road to parking space and space size between main entrance and parking space influence to approaching ways of exhibition-culture facilities in Gangneung.