• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.6
• /
• pp.1429-1434
• /
• 2014

Recently, SUA(Sudden Unintended Acceleration) are increasingly occurred. However, all the responsibilities of SUA are accepted by an innocent driver despite of painful results due to mystery of accurate cause. If a driver raises this kind of trouble to the corresponding manufacturer, the automaker collects EDR installed in that vehicle and provides the result of their analysis as it turns out most of the analysis results were diagnosed "there is nothing wrong with the car". In this trend, the technology to protect drivers' position from SUA should be developed. In this study, the researchers aimed to develop a black box system that collects additional data from throttle valve which is considered as one of major causes of SUA accidents, in order to explain cause of SUA and defend innocent drivers.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2015.07a
• /
• pp.187-190
• /
• 2015

주행 중 차선 이탈 경고 시스템은 사고 발생 예방 차원에서 매우 높은 효과가 인정되어서 차선이탈 경고 장치(LDWS) 제품들이 출시되고 있다. 본 논문은 블랙박스의 영상을 이용하여 차선 검출에 정확도를 향상하기 위한 알고리즘을 연구한 것으로 특히 차량에 장착되어 있는 블랙박스 영상을 영상 변환 없이, 실시간 소프트웨어 만 으로 처리할 수 있는 알고리즘을 연구한다. 차선인식을 위한 최적의 영상 ROI를 결정하고, 차선 인식 정확도를 향상하기 위한 전 처리 과정을 적용하고, 동영상의 연속성을 잘못된 차선인식에 대한 보정, 인식이 되지 않는 차선에 대한 후보 차선 추천 알고리즘과 시점 변환에 의한 야간, 곡선 도로에 대한 오인식율을 최소화 하는 방법을 제안한다. 도로주행의 다양한 환경에 대한 실험을 진행했으며, 각각의 방법 적용에 의한 오인식율의 감소와 많은 인식 알고리즘 적용에 의한 처리 속도 저하를 개선하기 위한 연구를 진행했으며, 본 논문은 블랙박스 영상을 이용하여 주행 차선 인식을 위한 최적 알고리즘을 제안한다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.1
• /
• pp.1-11
• /
• 2021

This paper presents a procedure to extract lane line models using a set of proposed methods. Firstly, an image warping method based on homography is proposed to transform a target image into an image which is efficient to find lane pixels within a certain region in the image. Secondly, a method to use the combination of the results of edge detection and HSL (Hue, Saturation, and Lightness) transform is proposed to detect lane candidate pixels with reliability. Thirdly, erroneous candidate lane pixels are eliminated using a selection area method. Fourthly, a method to fit lane pixels to quadratic polynomials is proposed. In order to test the validity of the proposed procedure, a set of black-box images captured under varying illumination and noise conditions were used. The experimental results show that the proposed procedure could overcome the problems of color-only and edge-only based methods and extract lane pixels and model the lane line geometry effectively within less than 0.6 seconds per frame under a low-cost computing environment.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1695-1700
• /
• 2011

In this paper, we introduce the network infrastructure in an advanced emu test line in Deabul. New technology has been applied to advanced EMU(DMU, integrated broadcasting system, black box and etc). In order to efficient and safely test of new developed train, failure, operation, status of test line and weather information should be monitored in real time. We has implemented a wireless and optical network infrastructure for reliability and scalability. The wireless communication capability between a car and ground is 20Mbps and back-hole network has 50Mbps of the communication performance. The network between test tracks and control office was established in the optical network. That can improve communication reliability.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2013.01a
• /
• pp.189-190
• /
• 2013

기존 차량용 블랙박스는 별도의 기기를 이용하는데, 이때 추가적인 비용이 발생하는 문제점이 있다. 또한 사고가 발생한 경우, 사용자의 의식을 체크 하지 못해 구조 신고를 보내는 등의 기능을 유연하게 추가하지 못하는 단점을 가지고 있다. 본 논문에서는 블랙박스 사용 시 발생하는 추가비용감소와 교통사고 발생 후 발생되는 환자의 응급 후송 및 뺑소니 등 2차 교통사고를 방지하기 위한 시스템의 필요성에 따라 아이폰에 있는 센서들을 활용하여 소프트웨어 방식의 차량용 블랙박스 시스템을 설계 및 구현하였다.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1762-1763
• /
• 2011

자동차 블랙박스는 자동차의 사고 전/후의 주행상태를 저장하여 사고의 원인을 규명하는데 사용된다. 사고 발생 시의 자동차의 주행상태를 정확히 기록하기 위해서는 자동차의 위치와 속도에 대한 정보도 필요하므로 자동차 블랙박스에서는 위치/속도 정보를 제공하기 위한 항법 시스템이 필요하다. 본 논문에서는 GPS 수신기와 MEMS 기반의 IMU를 사용하는 자동차 블랙박스용 항법 시스템을 설계하고 그에 대한 성능평가 결과를 제시하고자 한다.

• International Journal of Internet, Broadcasting and Communication
• /
• v.7 no.2
• /
• pp.123-129
• /
• 2015

This paper proposes an efficient method to detect direction indicators on road surfaces to support drivers in driving safely using the Simulink model. In the proposed method, the ROIs are detected using the detection method of maximally stable extremal regions (MSER), and the road indicator regions are detected using the speeded up robust features (SURF) matching method for the corresponding point matching of the detected ROIs and the road indicator templates. Experiments on various road satiations show that the processing time of about 0.32 sec per frame was required, and a detection rate of 91% was achieved.

• Journal of information and communication convergence engineering
• /
• v.8 no.6
• /
• pp.665-670
• /
• 2010

This paper suggests the vehicle remote control on the basis of Smart Phone. In general, most smart phone is mounted with G-sensor to control the motion. G-sensor is able to control several directions and movements of velocity along with X, Y, and Z axis. To access remote location and data system, we can also utilize Wi-Fi communication as well as bluetooth communication. In this study, we propose the scheme that is the car management application by remote control via real-time monitoring on mobile device for user convenience.

• International Journal of Internet, Broadcasting and Communication
• /
• v.10 no.3
• /
• pp.128-135
• /
• 2018

The various video recording device, like car black box and cctv, are used currently and video contents are used as evidence of traffic accidents and scenes of crime. To verify integrity of video content, there are various study on manipulated video content analysis. Among these studies, a study based on analysis of video file structure and its variables needs a tool which can be used to analyze file structure and extract interested attributes. In this paper, we proposed design and implementation of an analyzing tool which visualizes video file structure and its attributes. The proposed tool use a model which reflects commonality of various video container format, so it is available to analyze video structure with regardless of the video file types. And the tool specifies interested file structure properties in XML and therefore we can change target properties easily without modification of the tool.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.4
• /
• pp.143-148
• /
• 2017

Flash Memory which is light and strong external shock as storage of small electronics like smartphone, digital camera, car black box has been widely used. Since the operation speed of the read operation and the write operation are different from each other, and the flash memory has the feature that it is not possible to overwrite, the delete operation is added to solve these problems. Wear-leveling must also be considered, since the number of erase times of the flash memory is limited. Many studies have been conducted on the substitutional algorithms of flash memory based on these characteristics of recent flash memories. So, to solve the problem that has existing buffer replacement algorithm this thesis divide page into 6 groups and when proposed algorithm select victim page, it consider reference page frequency and page recency.