• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.6
• /
• pp.795-800
• /
• 2003

Juniper seed oil extracted by steam distillation has been a useful material as a medicine, insect repellant, and flavorant for alcoholic beverages. As the result of juniper seed oil analysis, the acid value, saponification value, unsaponification value phosphorus contents, and refractive index were 91.04, 85.15, 15.52, 11.04 ppm, 1.47, respectively The content of neutral lipids, glycolipids and phospholipids were 85.4%, 12.2% and 2.4%, respectively. From the fatty acids analysis, the major fatty acids from the juniperseed harvested in August were lauric acid (31.9% ), palmitic acid (28.0% ), stearic acid (9.9%), and oleic acid (8.5%) . However, maturated seed oil harvested in October mainly consists of linoleic acid (47.6%), linolenic acid (17.6%), oleic acid (16.1%), and palmitic acid (11.9%). Upon these analyses, fatty acids composition of juniper seed oil depends on the seed maturation. According to volatile compounds analyses of essential oil extracted using steam distillation method and SPME, the major compounds were $\beta$-myrcene, $\alpha$-pinene, $\beta$-farnescene, $\beta$-cubebene, limonene, trans-caryo-phyllene, $\alpha$-terpinolene, camphene, sabinene, and $\beta$-pinene.

• Microbiology and Biotechnology Letters
• /
• v.27 no.6
• /
• pp.491-499
• /
• 1999

A great variety of the volatile metabolic by-products was formed in yeast cell during alcohol fermentation. The seibel grape (Vitis labrasca) which was grown in the Southern Korea used for wines. The objective of this research was to identify the volatile flavor compounds during alcohol fermentation and aging at 12$^{\circ}C$. saccharomyces cerevisiae and Schizosaccharomyces pombe were inoculated and fermented in seibel grape must. The volatile flavor compounds of logarithmic, stationary and death phases were extracted, concentrated and identified by gas chromatography/mass spectrometer (GC/MS). The volatile flavor compounds were determined by a Hewlett-Packard 5890 II Plus GC which was equipped with Supelcowax 10 fused silica capillary column (60m$\times$0.32mm$\times$0.25${\mu}{\textrm}{m}$ film thickness) wall coated with polyethyleneglycerol. The scan detection method allowed the comparison of the spectrum from the chromatogram of volatile flavor compounds to those in data Wileynbs base library. Among the volatile compounds collected by ether-hexane extraction method, the evolution of 20 main compounds, such as 9 esters (ethyl butyrate, isoamyl acetate, ethyl caproate, n-hexyl acetate, ethl caprylate, ethyl caprate, diethy succinate, ethyl hexadecanoate, 2-pheneethyl acetate), 4 alcohols (3-methyl-1-butanol, 1-hexanol, 1-heptanol, benzoethanol), 4 ketones and acids (2-octanone, caproic acid, caprylic acid, capric acid), 2 furan and phenol (2,6-bis(1,1-dimethyl ethyl)phenol, 2,3-dihydrobenzofuran) were observed during alcohol fermentation and aging. The production of the esters during alcohol fermentation with S. cerevisiae was higher than those of Sch. pombe. The sensory scores of the aged wine samples in aroma, taste and overall acceptability were not significantly different(p<0.05).

• Journal of Pharmaceutical Investigation
• /
• v.28 no.2
• /
• pp.87-92
• /
• 1998

Kojic acid (KA) is an antimelanogenic agent which has been widely used in cosmetics to whiten the skin color. However, it has the drawbacks of the skin irritancy and the instability against the pH, temperature, and light. In order to overcome these problems, various topical gels and multiple emulsion creams which can control the release of active ingredient, KA, were formulated employing cream bases of mineral oil with caprylic capric triglyceride and hydrophilic polymers such as chitosan, carbopol. and pluronics. Using Franz diffusion cells mounted with a synthetic cellulose membrane (MWCO 12,000), drug release characteristics of the formulations were evaluated by the HPLC assay of KA concentration in the receptor compartment of pH 7.4 phosphate buffered saline solution. Drug release from chitosan-based gels (ChitoGel) obeyed to the first order kinetics with a rapid release especially in the initial period. However, pluronic-based gels (PluGel) and carbopol-based gels (CarboGel) revealed controlled release of drug to some extent, followed by the square root-time kinetics. Moreover, the release of KA was further controlled with the W/O/W multiple emulsion creams (MultiCream), showing the apparent zero order release kinetics by virtue of dynamic ratecontrolling membrane of the oil layer. The flux $(J,\;{\mu}g/cm^2/hr)$ of ChitoGel. CarboGel. PluGel. and MultiCream in the initial period of 6hr were 73.30, 28.67. 24.04 and 7.72, respectively. On the other hand, the skin irritancy score of ChitoGel and MultiCream were observed as 2.5 and 2.3 respectively, in the rabbit skin irritation test. Although there were insignificant differences at p<0.05 between those formulations, it was possible to conclude that the W/O/W multiple emulsion creams containing KA might be a good candidate for an antimelanogenic drug delivery system due to the controlled release of acidic drug molecules.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.5
• /
• pp.711-715
• /
• 2005

One of the prerequisites for the successful implementation of industrial-scale goat kefir production is to understand the effects of different kefir grains and culture conditions on the microbial and chemical properties of the goat kefir. Thus, the objectives of the present study were to evaluate the characteristics of kefir grains in Taiwan on the microbial and chemical properties of goat milk kefir, as well as to understand the influence of culture conditions on production of medium chain-length triglycerides (MCT). Kefir grains were collected from households in northern Taiwan. Heat-treated goat milk was inoculated with 3-5% (V/W) kefir grains incubated at 15, 17.5, 20 or 22.5$^{\circ}C$ for 20 h, and the microflora count, ethanol content, and caproic (C6), caprylic (C8), and capric acid (C10) levels measured at 4 h intervals. Our results indicate that incubation with kefir grains results in 10$^6$-10$^7$ CFU/ml microflora count and 1.18 g/L of ethanol content at 20 h of fermentation. Incubation with 5% kefir grain at 20-22.5$^{\circ}C$ produces the highest MCT levels.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.46 no.3
• /
• pp.283-294
• /
• 2020

In this study, in order to increase the utilization of Citrus junos seeds, which account for 13% of the weight ratio of Citrus junos ripened fruit, but are mostly discarded and not utilized, the efficacy of skin beauty of Citrus junos seed oil extracted by cold pressing was studied. Citrus junos seed oil was found to contain approximately 74% of unsaturated fatty acids consisting mainly of oleic acid and linoleic acid, and limonene, which is mainly contained in Citrus junos peel, contained a very low content of about 0.0187%. As a result of evaluating the DPPH radical scavenging activity of Citrus junos seed oil, 26% of DPPH radical scavenging ability was confirmed at 5% concentration of Citrus junos seed oil. To confirm the anti-inflammatory effect, as a result of testing RAW 264.7 cytotoxicity test and NO production for Citrus junos seed oil, NO production was suppressed by 53% at a concentration of 0.05% that does not show cytotoxicity. In addition, in the RBL-2H3 cytotoxicity and β-hexosaminidase release inhibitory efficacy test for anti-allergic efficacy confirmation, it was confirmed that β-hexosaminidas release was suppressed by 26% at a concentration of 0.05% that did not show cytotoxicity. Lastly, in the human skin application test result of O/W emulsion containing 5% of Citrus junos seed oil, it showed higher skin moisturizing effect than the control emulsion containing the same amount of caprylic/capric triglyceride. Therefore, it is thought that Citrus junos seed oil might be used as a excellent skin care material.

• Korean Journal of Food Science and Technology
• /
• v.21 no.6
• /
• pp.795-799
• /
• 1989

This study was carried out to hydrolyze lactose in commercial milk by ${\beta}-galactosidase$ from Kluyveromyces fragilis and to compare some physicochemical properties of yoghurts made from control and lactase-treated commercial milks. Quantitative analysis of sugars was performed by gas liquid chromatograph (GLC) on trimethylsilyl (TMS) derivatives. In commercial milk, 94.6% of lactose was hydrolyzed after 2 hours incubation at $40^{\circ}C$ with 6.0 units/ml of ${\beta}-galactosidase$. pH, titratable acidity and viable cell number of yoghurt made from lactase-hydrolyzed (LH) commercial milk were 4.1, 1.04% and $6.5{\times}10^8/ml$ of Str. thermophilus, $8.9{\times}10^8/ml$ of L. bulgaricus after 8 hours incubation at $40^{\circ}C$, respectively, The total contents of amino acid were 2.63% in control and 2.19%. in LH yoghurt. The total contents of free amino acid were 26.95 mg% in control and 17.55mg% in LH yoghurt. Analysis of free fatty acids resulted in that the contents of short chain fatty acids in LH yoghurt were a little higher than those in control. Both in control and LH yoghurt, the palmitic acid content was highest and that was followed by oleic and myristic acid.

• YAKHAK HOEJI
• /
• v.60 no.1
• /
• pp.36-45
• /
• 2016

This study was aimed to enhance the percutaneous absorption of tizanidine hydrochloride (TZ) across Strat-M$^{TM}$ artificial membrane and excised hairless mouse skin using various vehicles and chemical permeation enhancers. Solubility studies were performed using hydrophilic and lipophilic vehicles. To initially evaluate vehicle effects on skin permeation, Strat-M$^{TM}$ membrane was adopted using Franz-type diffusion cells loaded with 0.4 mg donor dose. Effects of fatty acids on the permeation of TZ from PG and PGMC were compared, and the effects of various hydrophilic vehicles in the presence of linoleic acid were studied using excised hairless mouse skin specimens. The mean solubility (mg/ml) of TZ in hydrophilic vehicles was higher: water > PG > DMSO > ethanol > PEG 200 > NMP > PEG 300 > PEG 400 > DGME, and solubilities in lipophilic vehicles such as PGMC, PGMC, IPM, Captex 200 and Captex 300 were much less than 1.0 mg/ml. Permeation rates through StratTM membrane from pure vehicles were in the rank order: PGMC ${\geq}$ LBF > DMSO ${\geq}$ NMP ${\geq}$ PGML ${\geq}$ PG ${\geq}$ PEG 200 ${\geq}$ DGME ${\geq}$ EtOH. However, permeation rates of TZ through hairless mouse skin from pure vehicles were very low, although PG showed the highest flux ($1.66{\pm}0.28{\mu}g/cm^2{\cdot}hr$). Therefore, PG was selected in further studies. Addition of enhancers (3 v/v%) into PG markedly increased the flux (${\mu}g/cm^2{\cdot}hr$): oleyl alcohol ($14.9{\pm}3.1$) ${\geq}$ oleic acid ($14.5{\pm}1.6$) ${\geq}$ linoleic acid ($13.7{\pm}1.3$) > capric acid ($4.4{\pm}0.6$) > caprylic acid ($2.1{\pm}0.4$). Among hydrophilic vehicles with linoleic acid, PG and DMSO revealed relatively higher permeation for TZ. Increase of donor dose in PG resulted in dose-dependent permeation fluxes. These results suggest that permeation properties of TZ from nonaqueous solutions are markedly different between Strat-$M^{TM}$ membrane and excised hairless mouse skin, and transdermal delivery of TZ would be feasible with a combination of PG and enhancers.

• Food Science and Preservation
• /
• v.17 no.5
• /
• pp.733-740
• /
• 2010

Brown rice vinegars were prepared by agitated or static acetic acid fermentation using different yeast strains (Saccharomyces kluyveri DJ97, Saccharomyces cerevisiae JK99, Saccharomyces cerevisiae GRJ, or Saccharomyces cerevisiae H9). Organic acid contents and levels of volatile compounds were compared in vinegars prepared by different methods. The chosen yeast strain did not significantly affect the organic acid content of vinegar. In vinegars prepared by agitated acetic acid fermentation, organic acid contents were, in the order of descending abundance, acetic acid, citric acid, lactic acid, oxalic acid, and tartaric acid. In vinegars prepared by static acetic acid fermentation, no citric acid was detected, and lactic acid content was higher than that in agitated acetic acid fermented vinegar. The volatile compounds of both vinegars, analyzed by GC-MS, did not significantly differ when various yeast strains were used. Eighteen volatile compounds were detected in vinegar prepared by agitated acetic acid fermentation and 11 in vinegar prepared by static fermentation. Volatile compounds that can affect vinegar quality, including ethyl acetate and phenethyl acetate, were present at high concentrations in static acetic acid fermented vinegar. Electronic nose analysis showed that volatile chemical patterns differed between the two types of vinegar, but there were no significant differences in sensory scores between vinegars prepared using various yeast strains or by either of the two methods of fermentation.

• Korean Journal of Food Science and Technology
• /
• v.42 no.1
• /
• pp.75-81
• /
• 2010

In order to investigate the effects of different milling degrees on the quality of glutinous rice wines, the physicochemical properties and volatile compounds of various wines were evaluated. Sample wines prepared from glutinous rice with 90, 80, and 70% milling yields were analyzed for ethanol, pH, total acids, amino acids, soluble solids, coloring degree, UV absorbance, reducing sugars, organic acids, free sugars and volatile compounds. After fermentation for 17 days, ethanol contents in the wines ranged from 15.2 to 15.85%, while total acid levels ranged from 0.31 to 0.35%. The amino acid contents in four samples ranged from 0.63 to 0.73%, while soluble solid contents ranged from 11.4 to $13.1^{\circ}Bx$. The wine prepared from glutinous rice with a 30% degree of milling showed the highest coloring degree, UV absorbance and reducing sugar content among four samples. Furthermore, this wine had the highest levels of malic acid and acetic acid, while the glutinous rice wine prepared from rice with a 0% degree of milling had the highest levels of succinic acid and lactic acid. In all the glutinous rice wines tested, the most abundant free sugar was glucose followed by maltose. With increasing degree of milling, the alcohol, amino acid and organic acid contents of the glutinous rice wines decreased, whereas soluble solids, coloring degree, UV absorbance, reducing sugar and free sugar contents increased. Volatile compounds were identified using GC-MSD, and thirty-nine esters, seven alcohols, six acids, one aldehyde, four alkanes, one alkene and two miscellaneous compounds were identified in the glutinous rice wines. Using relative peak area, it was determined that other than ethyl alcohol, hexadecanoic acid ethyl ester was the major component and was primarily found in the range of 11.566-18.437%. Succinic acid diethyl ester and isoamyl laurate decreased with an increasing degree of milling, whereas hexanoic acid ethyl ester and 2-octenoic acid ethyl ester increased. Overall, it was shown that different milling degrees greatly affected the physicochemical and volatile characteristics of the glutinous rice wines.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.24 no.3
• /
• pp.116-122
• /
• 1998

It is well known that all-trans-retinol is not only very unstable in heat, light, air, and water, but also skin-irritant despite a good anti-wrinkle effect. Therefore, it is very difficult to stabilize retinol and make the safe retinol containing cosmetics by using a certain concentration of retinol with real effect. In order to dissolve these problems and apply retinol for skin care cream, firstly retinol is to be encapsulated in the vesicle called Liposphere (pseudo-liposome) which is made by homogenizing under high pressure the mixtures of lecithin, retinol, caprylic/capric triglyceride, and hydroalcoholic solution ; and then this retinol containing Liposphere is to be intercalated in lamellar liquid crystal layer which is prepared by emulsifying in an optimal ratio the mixtures composed of non-ionic emulsifier (cetearyl glucoside, sorbitan stearate & sucrose cocoate etc), cetearyl alcohol, stearic acid, cholesterol, and ceramide. In addition, the stability of the retinol containing oil in water cream by adding the polymeric emulsifier such as acrylate /C10-30 alkyl alkylate crosspolymer is to be ensured even at 55 C. Retinol containing oil in water cream prepared through above procedure could be very stable at 45 C for at least 50 days. The structure identification of lamellar liquid crystal was determined using polarized light microscope and electron microscope Conclusively, we could make the very stable retinol containing oil in water cream by triple procedure, that is, encapsulation of retinol in Liposphere, intercalation of retinol in lamellar liquid crystal layer, and assurance of the high temperature stability of cream even at 55 C.