• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2008년도 정기학술발표대회 논문집
• /
• pp.794-799
• /
• 2008

건설 가설재 성능검정제도의 전환기에 들어서 주요 가설재들의 성능검정을 평가하고 선진국의 관련 체계와 비교하여, 안전인증제를 통해 새로운 건설공사용 가설재들의 인증제도를 제안하고자 한다. 현재의 성능검정제도는 1992년에 시작되어 2003년에 재 개정되면서, 3년마다 재 검정을 받도록 하고 있다. 그러나 제조능력을 향상시키지 못하고 업체 간 가격경쟁의 심화로 인해 대부분 같은 형태, 기능의 제품만을 양산하고 있는 실정이다. 기존 성능검정제도에서 안전인증제로의 전환은 보다 체계적인 심사방법 및 품질관리 시스템을 포함하고 있으며, 건설 환경 변화에 대응할 수 있는 다양한 요구사항에 맞춘 규격을 제시할 수 있도록 하고 있다. 안전인증제를 통한 건설공사의 가설재는 의무인증대상과 임의인증대상으로 나누어지며, 종전보다 제품의 품질과 관리 시스템을 향상시켜줄 수 있을 것으로 기대된다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제14권1호
• /
• pp.201-208
• /
• 2022

As around the world, ground and underground transportation capacity is reaching its limit, centering on urban areas. As urban traffic becomes congested, time and cost are astronomical, and environmental destruction caused by urban pollution is becoming increasingly serious. As a way to solve this problem, the means of flying over the air are in the spotlight as the next generation of future transportation, and the concept of urban air mobility (UAM, Urban Air Mobility) is defined as systematic planning. The development of an electric-powered vertical take-off (eVTOL) aircraft that obtains electric power through a battery using a personal aerial vehicle (PAV) as a means of transportation has accelerated. As the aircraft development of new technology aircraft in the evtol method is actively carried out, the need to prepare systems such as aircraft certification standards, pilot qualification systems, and qualification management is emerging. The Federal Aviation Administration (FAA) and the European Union Aviation Safety Agency (EASA), which lead international standards, announced new special technical conditions and temporary regulations SCVTOL-01, respectively. However, the pilot qualification system for operating the uam aircraft has not yet been clearly announced. Therefore, this paper analyzes the recently announced FAA regulations and EASA regulations to identify differences and directions in perspectives on UAMs and study the existing vertical take-off and landing aircraft (VTOL) pilot qualification system to present directions for qualification classification.

• 대한기계학회논문집B
• /
• 제30권9호
• /
• pp.858-865
• /
• 2006

SMART Pilot is a multipurpose small capacity integral type reactor. Main coolant pump (MCP) of SMART Pilot is a canned-motor-type axial pump to circulate the primary coolant between nuclear fuel and steam generator in the primary system. The reactor is designed to operate under condition of $310^{\circ}C$ and 14.7MPa. Thus MCP has to be tested under same operating condition as reactor design condition to verify its performance and safety. In present wort a test apparatus to simulate real operating situations of the reactor has been designed and constructed to test MCP. And then functional tests, performance tests, and endurance tests have been carried out upon a prototype MCP. Canned motor characteristics, homologous head/torque curves, coast-down curves, NPSH curves and lift-time performance variations were obtained from the qualification test as well as hydraulic performance characteristics of MCP.

• 한국유체기계학회 논문집
• /
• 제8권3호
• /
• pp.16-25
• /
• 2005

The purpose of this study is localization of safety relief valves for Nuclear Service. The safety relief valve is the important equipment used to protect the pressure vessel, the steam generator and the other pressure facility from overpressure by discharging the operating medium when the pressure of system is reaching the design pressure of the system. We developed design technology used FEM ' CFM about safety relief valve for Nuclear Service according to ASME (or KEPIC) Code and KHNP's Technical Specification. To prove validity of a design technology, actually, we manufactured and inspected and tested the sample products designed according to a developed technology. The capacity qualification test was achieved according to requirement of ASME(or KEPIC) Code by NBBI and the functional qualification test was achieved according to ASME QME-1 for operating condition in technical specification of KHNP by NLI. Therefore we have to achieve the development of safety relief valves for Nuclear Service with our own technologies.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.10-15
• /
• 2007

For the introduction of the electricity of the special design and supervision system to Protect the faulty-workmanship of the electricity equipment and to reserve the electricity safety, last 1995 "Electricity Technology Management Act" were carried out enactment. March 2002, we introduced the pre-Qualification system that is selected the competent company about the electricity design and supervision service over so much capacity which is ordered by the Public institution such as the nation, local autonomous entity, government investment institute and so on. December 2005, the electricity equipment over so much capacity was taken the housing construction plan's approval by the housing act in case, the municipal or district governor with the authority to approve who selected the electricity supervision company according to the pre-Qualification system. Due to the introduction of the system, we could expect the rights and interests increase of the consumer by eradicating dumping of the close relationship between supervision company and the builder, reduction and concurrent position of the supervisor, according to confirm the quality of the electricity equipment and electricity safety. In spite of introducing of the system, the problems occured as reducing the electricity designer's task range compared with different field, modifing the supervisor's rank system rationally, because of researching about the electricity design and supervision technique lacks. Also, KEEA(Korea Electric Engineers Association) manage the caller of the electricity design and supervisor(company or people), but the problems occured as opening to the public about the curler management, introducing automatic bidding system and We need the solution plan about this. Consequently, we consider the present situation of the domestic and outside and problem about the electricity design and supervision system in this paper, try to present rational operation plan through this.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2004년도 유체기계 연구개발 발표회 논문집
• /
• pp.492-500
• /
• 2004

The purpose of this study is localization of safety relief valves fur Nuclear Service through technical development with overall design, fabrication, inspection, capacity certification test and functional qualification test of safety relief valves in accordance with KEPIC MN Code(or ASME Sec.III ). The safely relief valve is the important equipment used to protect the pressure vessel, the steam generator and the other pressure facility from overpressure by discharging the operating medium when the pressure of system is reaching the design pressure of the system. But we're depending on technology of the other country up to the present time. Because we don't have our own technologies, we have been spent the great time and money on installing and repairing safety relief valve at nuclear power plant. Therefore we have to achieve the development of safety relief valves for Nuclear Service with our own technologies.

• 한국항공우주학회지
• /
• 제37권12호
• /
• pp.1258-1263
• /
• 2009

본 논문에서는 개발된 과학기술위성3호 대용량 메모리 유닛의 검증모델의 성능 및 환경시험 결과를 나타내었다. 과학기술위성3호 대용량 메모리 유닛은 적외선 영상시스템(MIRIS)과 초소형 영상 분광기(COMIS)에서 최대 100Mbps로 수신한 데이터를 32Gb의 메모리에 저장한 후 지상으로 10Mbps의 속도로 전송하는 임무를 수행한다. 탑재체 데이터 수신 시험과 데이터 수신 시스템으로의 데이터 전송 시험을 통해서 성능을 검증 하였다. 또한 발사체 환경과 우주 환경에서의 성능 확인을 위해서 진동 시험과 열진공 시험을 수행 하였다.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2008년도 정기학술발표대회 논문집
• /
• pp.568-571
• /
• 2008

시공능력공시제도는 97년부터 건설공사 발주자가 당해 건설공사를 수행할 수 있는 적정한 건설업자를 선정할 수 있도록 하기 위하여 도입되었으나, 시공능력평가항목 및 평가액 산정방식은 여러 가지 정책목표의 달성을 위해 이질적인 요소가 부가됨으로써 1건 공사의 수행능력을 판단하는데 있어서 원래의 의미가 많이 변질되었다. 매년 시공능력평가제도의 공시 때마다 논의되는 문제점 등으로 이 제도의 변화가 불가피하여, 특정 업종에 대해 시공능력공시제 폐지 및 전문화하는 등의 정책방향 변화를 모색하고 있는 시점이다. 이에 본 연구는 기존 문헌 고찰을 통해 국내 건설산업에 세 시공능력평가제도의 의의와 그에 따른 문제점 및 개선사항을 분석하고, 최근 정책적 방향을 고려하여 시공능력평가제도의 전문화 유도 및 공사의 특수성을 고려하여 개선할 수 있는 통합시스템 구축에 관한 기초연구를 수행하였다.

• 한국항공우주학회지
• /
• 제35권4호
• /
• pp.363-368
• /
• 2007

높은 중량에너지밀도로 배터리 무게를 줄일 수 있는 장점을 갖는 리튬이온 배터리는 중량이 중요한 관심사인 많은 항공우주 응용분야에서 빠른 속도로 Ni-Cd, Ni-H2 등의 기존 배터리를 대체하고 있다. 또한 리튬이온 배터리는 낮은 열 손실 특성과 높은 에너지 효율 그리고 저렴한 셀 단가를 갖는다. 80개의 소니 US18650 리튬이온 셀을 사용한 KSLV-I 탑재배터리 모듈은 셀을 8개씩 직렬로 구성한 후 각 열을 병렬로 10개 연결하여 요구되는 전압과 용량을 공급한다. 본 논문에서는 우주발사체용 리튬이온 배터리의 설계 및 그 특성에 대해 소개하며, 예상되는 우주환경에서 배터리가 신뢰성 있게 동작하는지를 검증하는 환경시험 프로그램 절차를 보였다. 배터리 성능은 전자부하기를 이용한 시뮬레이션 시험을 통해 확인하였고 발사체 2단에 장착하여 각 전장품들과의 연계시험을 통해 검증하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.629-636
• /
• 2003

The purpose of this study is localization of safety relief valves for Nuclear Service through technical development with overall design, fabrication, inspection, capacity certification test and functional qualification test of safety relief valves in accordance with ASME Section III and KEPIC Code. Safety relief valve is the important equipment used to protect the pressure vessel, the steam generator and the other pressure facility from overpressure by discharging the operating medium when the pressure of system is reaching the design pressure of the system. But we're depending on technology of the other country up to the present time. Because we don‘ have our own technologies, we have been spent the great time and money on installing and repairing safety relief valve at nuclear power plant. Therefore we have to achieve the development of safety relief valves for Nuclear Service with our own technologies.