• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1896-1898
• /
• 2001

An offset problem caused by the static parasitic capacitors is analyzed and then some techniques to reduce their effect on the capacitive position sensor are presented. Also new offset compensation technique is proposed that by adjusting the magnitudes of the modulating signals independently, the charge imbalance between electrodes caused by the parasitic capacitors is eliminated without sensor gain variation. Simulation results are given to validate the proposed compensation technique.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 A
• /
• pp.243-245
• /
• 2000

In general, aluminum electrolytic capacitors are used in the DC link of PWM inverters fur ac motor drives. The capacitor usually has the shortest lifetime in the system and then determines the lifetime of the inverter system. In this paper, a method of capacitor lifetime estimation is proposed by using an ESR(equivalent series resistance) model and a heat transfer model of capacitor, from which internal operating temperature is estimated. Then, the lifetime is predicted by Arrhenius's equation. A practical example is presented.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 I
• /
• pp.338-341
• /
• 2003

In this paper, we designed and implemented a microstrip directional coupler that has high directivity at 2.14 GHz. To design coupler that has high directivity, we used interdigital capacitors instead of lumped elements. The measured results show the diretivity is higher than 30 dB at 2.14 GHz.

• 전기의세계
• /
• 제22권6호
• /
• pp.24-32
• /
• 1973

When applying capacitors to distribution line, an effort must be made to determine the economic benefits resulting from the installation of a capacitor. There have been many papers and articles published on the economics of capacitors. Most of these are special cases, or have so many qualifications that they are not much use for other cases unless very careful attention is given to minute details. A general economic analysis on a distribution line is very complicated problem. Consequently, a diagram solution is illustrated for determining the economic condenser and applying resonably well for the distribution line with any load division.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1388-1390
• /
• 1994

A polyimide-based capacitive humidity sensor has been designed and fabricated using silicon integrated-circuit technology, and its performance measured. The sensor showed excellent linearity, low temperature coefficient, and low hysteresis over a wide range of relative humidity and temperature. The signal conditioning circuits for detecting relative humidity and converting it to voltage have been developed based on a charge redistribution between capacitors using switched -capacitors.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1614-1617
• /
• 2002

This paper studies basic phenomena of intermittently coupled capacitors circuits. As an analysis tool, we introduce Hybrid return map of real and binary variables, and analyze bifurcation phenomena for three parameters . Co-existence of synchronous phenomena is also shown. Using a simple test circuit, typical phenomena see verified in the laboratory.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제52권4호
• /
• pp.170-176
• /
• 2003

This paper introduces an improved pulse generator using power semiconductors and L-C circuit. The proposed circuit consists of the series connected boost converter structure. In the presented circuits, high voltage pulse is generated by series-connection of capacitors and IGBTs. The charging of capacitors and voltage balance of IGBTs are obtained automatically. To verify the proposed circuit, 1.8㎸, 40A pulse generator is manufactured and tested.

• 전기저널
• /
• 10호통권142호
• /
• pp.27-34
• /
• 1988

• 전기전자학회논문지
• /
• 제18권4호
• /
• pp.620-624
• /
• 2014

본 연구에서는, Ni/CNT/$SiO_2$ 구조의 4H-SiC MIS 캐패시터를 제작하고 전기적 특성을 조사하였다. 이를 통하여 4H-SiC MIS 소자에서 탄소나노튜브의 역할을 분석하고자 하였다. 탄소나노튜브는 이소프로필알코올과 혼합하여 $SiO_2$ 표면에 분산하였다. 소자의 전기적 특성 분석을 위하여 300-500K의 온도 범위에서 소자의 정전용량-전압 특성을 측정하였다. 밴드 평탄화 전압은 양의 방향으로 shift되었다. 정전용량-전압 그래프로부터 계면 포획 전하 밀도 및 산화막 포획 전하 밀도가 유도되었다. 산화막의 상태는 4H-SiC MIS 구조의 계면에서 전하 반송자 또는 결함 상태와 관련된다. 온도가 증가함에 따라 밴드 평탄화 전압은 음의 방향으로 shift되는 결과를 얻었다. 실험 결과로부터, Ni과 $SiO_2$ 계면에 탄소나노튜브를 첨가함에 따라 4H-SiC MIS 캐패시터의 게이트 특성을 조절 가능할 것으로 판단된다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.879-891
• /
• 2009

Impedance of rails is increased by the magnetic coupling between rails and reinforcing bars in the concrete slab track. Currently, the current of track circuit has been compensated by installing the compensation capacitors on track circuit because of increasing the impedance of rails. In case of a rapid transit railway, the compensation capacitors are installed every 20[m] to compensate the current of track circuit in the concrete slab track. Because the interval of one block for a rapid transit railway is as long as 1500[m], the compensation capacitors are installed about the number of 70$\sim$75 on track circuit. However, in case the compensation capacitors are broken over the number of three, it is a problem that the amplitude of current is under standard amplitude of current which is 0.8[A]. In this paper, it was suggested installing a compensation capacitor by using resonance phenomenon on the concrete slab track. We represent the electrical model of track circuit and the four terminal network, calculate the parameters demanded for the electrical model in the concrete slab track. Also, we computed the position and capacitance of the compensation capacitor about 2040[Hz], 2400[Hz], 2760[Hz], 3120[Hz] which currently is the track circuit frequency in the Gyeongbu rapid transit railway and demonstrated the validity of it, using the Matlab and PSpice program.