• Korean Journal of Geomatics
• /
• v.3 no.1
• /
• pp.73-79
• /
• 2003

To manage national territory and cadastral data efficiently, accuracy and cost-efficiency in cadastral boundary surveying is inevitable. The efficient management of cadastral data is a very important element in national land management. Survey techniques are being introduced. Recently, improvements in survey techniques have been made with the development of satellite surveying, Allowing accurate and fast surveys. If we can calculate the output accurately in real-time in survey fields, it will open a new method in cadastral detail surveying. According to the classification on Law of cadastral surveying, Cadastral surveying can be divided into cadastral control point surveying and cadastral detail surveying. The control point survey can be divided into cadastral triangulation surveying and cadastral traverse surveying. The detailed survey is usually perform by plane surveying. Among these, cadastral detail surveying will be reviewed in this study. In this study, the combination of the satellites, such as US managed GPS and Russian managed GLONASS was used. In the satellite survey in downtown, data interruption symptoms arose(according to the mask angle of the satellite). Therefore; we combined the satellites to get date more accurately. A block of Haewoondae New City in Busan, Korea, which has Numerical Cadastral Law was selected as the sample area for this study. Block II and III are surrounded by high rise apartments. One side of Block I and IV is level ground and the other side is full of high rise apartments. Especially, Block II is surrounded by high rise apartment houses with 20 meters width. In the results of the study Block II did not satisfy the allowable precision, while Block I, II and IV satisfied the allowable precision of the enforcement regulations of Cadastral Law. Therefore, it is judged that the traditionally used Total Station method should be used for supplementary survey on Block II, in stead.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.1
• /
• pp.77-86
• /
• 2013

This study presents a plan to develop a integrated management system for data survey of cadastral surveying to efficiently manage and research cadastral survey data. As a result of analysis of the existing cadastral survey data used to evaluate efficiency of the developed integrated cadastral survey data management system, it was shown that data survey time can be reduced by approximately half.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.1
• /
• pp.65-75
• /
• 2013

In this study, one of the main aims is to build up a technical foundation for promoting the cadastral resurvey effectively and to improve the accuracy of cadastral surveying is to make use of precise surveying techniques in allowance of position errors as reference accuracy in cadastral resurvey, which is proper to obtain the sufficient accuracy of the cadastral control points, and parcel boundary points by introducing the GNSS-based surveying techniques on cadastral survey. In detail, the existing procedures and outcomes of cadastral survey were compared and analyzed for suggesting a better survey technique than that of the other techniques in a variety of aspects of capability of cadastral survey. The new skills and supports could be upmost importance when doing cadastral survey. What's more, essentially, 'The Measurement Department' makes all the efforts to establish 'The Surveying Regulations'. This could possibly apply GNSS-based surveying technique to the cadastral resurvey for the foreseeable future and this research paper suggested that how to improve absolute accuracy of cadastral reference points by means of putting to use the appropriate models of measurement further.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2007.11a
• /
• pp.477-481
• /
• 2007

The purpose of this study is to provide the ideal forecasting model of cadastral survey work load through the Economeatric Analysis of Time Series, Granger Causality and VAR Model Analysis, it suggested the forecasting reference materials for the total amount of cadastral survey general work load. The main result is that the derive of the environment variables which affect cadastral survey general work load and the outcome of VAR(vector auto regression) analysis materials(impulse response function and forecast error variance decomposition analysis materials), which explain the change of general work load depending on altering the environment variables. And also, For confirming the stability of time series data, we took a unit root test, ADF(Augmented Dickey-Fuller) analysis and the time series model analysis derives the best cadastral forecasting model regarding on general cadastral survey work load. And also, it showed up the various standards that are applied the statistical method of econometric analysis so it enhanced the prior aggregate system of cadastral survey work load forecasting.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.3
• /
• pp.165-176
• /
• 2018

To solve the inconsistencies between realistic boundaries and the cadastral record boundaries, the cadastral resurvey project has been funded by a large budget since 2012 and executed over a long period of time until 2030. However, if the causes of inconsistencies are not analyzed and addressed, these inconsistencies could possibly reoccur. Even though the causes of inconsistencies can be defined in several aspects, including regulations, surveying methods, and management of cadastre maps or survey results, and so on, this study focuses on analyzing the inconsistency problems in the management of cadastre maps or survey results. In order to resolve the problems in inconsistencies between the cadastre maps and survey results, the study proposes to develop the cadastre data model based on LADM (Land Administration Domain Model) to manage the cadastre maps and survey results in better ways. In order to proposed the Cadastre Data Model, we analyzed the cadastre management system implemented in Korea and identified requirements to resolve the problems in inconsistencies, which are considered in the proposed data model as follows: 1) cadastral management system based on individual parcels, 2) synthesis of a realistic boundary and cadastral record boundary, 3) management of official and sharing reference data, 4) consistent management of survey results and parcel boundaries, 5) temporal managements of parcel boundaries. In the end, this study proposes a cadastral data model based on the LADM to integrate and manage the cadastral surveying results of the new cadastral management system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.3
• /
• pp.684-694
• /
• 2009

This study is aimed at looking into the PR method of cadastral re-survey, and at looking for the reason of the delay of cadastral re-survey project. We thought that the reason why the cadastral re-survey project was delayed was a lack of a national agreement on it owing to an insufficient PR. So, to solve this question, we proposed an alternative plan for the PR method of cadastral re-survey, using Hutton's PR model. As a result of a study, a total of 31 PR methods was made which were apt for every practical PR on the basis of 6 three-dimensional models of PR practice. But, some of Hutton's PR models proved to be unfit for the cadastral re-survey project. Therefore, we formed and proposed a new model to apt for the cadastral re-survey project. The result of this study is expected to be of help in getting a foundation to form a national agreement on the quick operation of a upcoming cadastral re-survey project.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.507-512
• /
• 2004

Research that establish new cadastral survey model that use GPS to introduce GPS observation technique in cadastral survey and research that develop connection technologies are gone abuzz. The purpose of this research is to keep in step in such trend and grasp present condition and performance of surveying connection to common use GPS data processing software, and analyze data processing algorithm, and develop suitable GPS data processing software in our real condition regarding GPS data processing and result of control point calculation. This research studies analysis common use software and error occurrence by data processing method that college and company have. Also, It analyzes algorithm that is applied to existing GPS data processing software. After that we study algorithm that is most suitable with cadastral survey and then develop cadastral survey calculation software for new cadastral control points

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.8
• /
• pp.3470-3476
• /
• 2012

In this study, for cadastral surveying specified in current relevant legislation, regulations of allowable error tolerance and applicable equipments, accuracy in the relevant regulations and applicable regulations were comprehensively studied. Based on them, the objective was to develop performance standard for cadastral surveying equipments satisfying allowable error tolerance of cadastral surveying specified in the special law for cadastral re-survey. The study results are as follows. By comparing current legislation for performance and allowable error tolerance of applicable equipments with provisions of the special law for cadastral re-survey, analyzed were where performance of equipments needs to be improved on cadastral re-survey project. Based on them, as primary control point surveying and detail surveying were separated, performance standard of equipments were presented. Results of this study may be utilized as basic materials for supply and demand program of surveying equipments on establishment of the basic plan for cadastral re-survey project.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.6_2
• /
• pp.969-977
• /
• 2022

Currently, in Korea, aerial photogrammetry is being studied for cadastral boundaries and numerical maps. Since the announced value of cadastral survey is closely related to ownership, the accuracy and reliability of the published value should be emphasized above all else. However, although aerial photogrammetry has great advantages in economic feasibility and surveying efficiency, it has many limitations when extracting the boundary of cadastral survey based on the acquired image. In order to improve these limitations, in this study, an aerial target was applied to obtain reliability improvement. Therefore, in order to examine the usefulness of aerial photogrammetry for cadastral survey application, cadastral boundary extraction and accuracy comparison analysis were conducted.

• Journal of the Korean association of regional geographers
• /
• v.15 no.1
• /
• pp.161-178
• /
• 2009

The introduction of a world geodetic system for cadastral survey will be started the enactment of the law on survey, hydro-graphical examination and cadastre. However, the cadastral control points are not homogeneous and correspond with national control points because of various reasons. To cope with this problem, the 1,600 high accurate control points, which can be interlocked with national GPS control points, has selected from existing 20,000 cadastral control points. These selected control points were calculated as an accurate world geodetic system and it makes a homogeneous cadastral survey network. Through these measures, for the future carrying out national project, this study will be effectively contributed to establish the cadastral infrastructures for the Korea cadastral reform project.