Journal of the Korea Academia-Industrial cooperation Society (한국산학기술학회논문지)

The Korea Academia-Industrial cooperation Society (한국산학기술학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Performance Standard of Surveying Equipments for Cadastral Re-survey Project

지적재조사사업 측량 장비의 성능 기준 연구

  • Received : 2012.05.21
  • Accepted : 2012.08.09
  • Published : 2012.08.31
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, for cadastral surveying specified in current relevant legislation, regulations of allowable error tolerance and applicable equipments, accuracy in the relevant regulations and applicable regulations were comprehensively studied. Based on them, the objective was to develop performance standard for cadastral surveying equipments satisfying allowable error tolerance of cadastral surveying specified in the special law for cadastral re-survey. The study results are as follows. By comparing current legislation for performance and allowable error tolerance of applicable equipments with provisions of the special law for cadastral re-survey, analyzed were where performance of equipments needs to be improved on cadastral re-survey project. Based on them, as primary control point surveying and detail surveying were separated, performance standard of equipments were presented. Results of this study may be utilized as basic materials for supply and demand program of surveying equipments on establishment of the basic plan for cadastral re-survey project.

본 연구에서는 현행 지적측량 관련 법률에서 규정하고 있는 지적측량에 대한 성과인정 범위와 적용 장비 규정, 관련 규정에서의 정확도와 적용 규정 등을 종합적으로 고찰하여 지적재조사에 관한 특별법에서 규정하고 있는 지적측량의 성과인정 범위에 적합한 지적측량 장비의 성능 기준을 마련해 보고자 하였다. 연구성과는 다음과 같다. 적용 장비의 성능과 성과인정 범위에 대해 현행 법률과 지적재조사에 관한 특별법 규정의 비교를 통해 지적재조사사업시 장비의 성능 개선이 필요한 부분에 대해서 기초측량과 세부측량으로 구분하여 기준을 제시하였다. 본 연구의 성과는 지적재조사사업을 위한 기본계획수립시 측량 장비 수급 계획 등에 기초자료로 활용이 가능하다.

Keywords

References

  1. Kang, Tae Seok, "Execution Strategy of Cadastral Renovation Projects", Journal of the Korean Society of Cadastre, Vol.21, No.2, pp. 1-20, 2005.
  2. MLTM, A Study on Preparation of Basis for Cadastral Re-Survey Project, Vol.1-4, 2011.
  3. Kim, Jung Sim, "A Study of Preparation of Basis for Project Propulsion of Cadastral Resurvey(Focusing on th Point of Contention)", Master of Engineering, MyongJi University, pp. 20-21, 2004.
  4. Ryou, In Jong, "Establishment of Urban Control Points using GPS RTK Method", Master of Engineering, Chungbuk National University, 2001.
  5. Park, Kwang Soon, Hong, Sung Eon, "A Study on the PR Method of Cadastral Re-survey Project Using Hutton's PR Model", Journal of the Korea Academia-Industrial Cooperation Society, Vol.10, No3, pp. 684-694, 2009. https://doi.org/10.5762/KAIS.2009.10.3.684
  6. Park, Soon Pyo, Choi, Yong Kyu, Kang, Tae Seok, Introduction to Land management, Hyung Seul, Inc, pp. 420-421, 1993.
  7. Lee, Dong Hyun, "An Analysis on the Suceessful Factors of Land Information Management Resurvey", Doctoral Thesis, Cheongju University, 2000.
  8. Hong, Sung Eon, "Analytical Study on the Priority and Importance of National Territorial Spatial Information Investigation Based on AHP Decision Making Method", The Geographical Journal of Korea, Vol.42, No.1, pp. 149-158, 2008.
  9. Hong, Sung Eon, "An Analysis on the Results of Cadastral Coordinate Computation of Urban Control Point for Connection to Cadastral Control Point(A Case Study of Changwon-si of Kyungnam)", Journal of the Korean Society for GeoSpatial Information System, Vol.19, No.4, pp. 127-138, 2011.
  10. Hwang Chang Sup, Jung, Sung Hyuk, Lim, In Seop, Lee, Jae Kee, "Setting out Urban Control Points using GPS Real Time Kinematic Method", Proceedings of the KSCE conference(2011), Korean Society of Civil Engineers, pp. 2379-2382, 2001.