• Korean Journal of Geomatics
• /
• v.3 no.1
• /
• pp.73-79
• /
• 2003

To manage national territory and cadastral data efficiently, accuracy and cost-efficiency in cadastral boundary surveying is inevitable. The efficient management of cadastral data is a very important element in national land management. Survey techniques are being introduced. Recently, improvements in survey techniques have been made with the development of satellite surveying, Allowing accurate and fast surveys. If we can calculate the output accurately in real-time in survey fields, it will open a new method in cadastral detail surveying. According to the classification on Law of cadastral surveying, Cadastral surveying can be divided into cadastral control point surveying and cadastral detail surveying. The control point survey can be divided into cadastral triangulation surveying and cadastral traverse surveying. The detailed survey is usually perform by plane surveying. Among these, cadastral detail surveying will be reviewed in this study. In this study, the combination of the satellites, such as US managed GPS and Russian managed GLONASS was used. In the satellite survey in downtown, data interruption symptoms arose(according to the mask angle of the satellite). Therefore; we combined the satellites to get date more accurately. A block of Haewoondae New City in Busan, Korea, which has Numerical Cadastral Law was selected as the sample area for this study. Block II and III are surrounded by high rise apartments. One side of Block I and IV is level ground and the other side is full of high rise apartments. Especially, Block II is surrounded by high rise apartment houses with 20 meters width. In the results of the study Block II did not satisfy the allowable precision, while Block I, II and IV satisfied the allowable precision of the enforcement regulations of Cadastral Law. Therefore, it is judged that the traditionally used Total Station method should be used for supplementary survey on Block II, in stead.

• Journal of Korean Society for Geospatial Information Science
• /
• v.12 no.3 s.30
• /
• pp.23-31
• /
• 2004

Cadastral surveying is related to demarcating legal boundaries and areas for the sake of registering a properly on cadastral records or restoring registered boundaries on the ground. It is composed of control surveying (cadastral triangulation and supplementary control surveying) and detail surveying. Detail surveying is classified into plane table surveying by graphical cadastral map and numerical surveying by boundary point coordinates. In this study we compared the accuracy of plane table surveying with numerical surveying using Parcel Based Land Information System(PBLIS) data constructed by the cadastral map digitalization business. In conclusion the result by numerical surveying was analyzed as more accurate than the result of plane table surveying, as Root Mean Square Errors(RMSE) of graphical cadastral surveying is 0.766m and that of numerical cadastral surveying using Total Station(T/S) is 0.683m. Therefore, PBLIS data is expected to be used for surveying legal boundaries and areas in the near future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.8
• /
• pp.3470-3476
• /
• 2012

In this study, for cadastral surveying specified in current relevant legislation, regulations of allowable error tolerance and applicable equipments, accuracy in the relevant regulations and applicable regulations were comprehensively studied. Based on them, the objective was to develop performance standard for cadastral surveying equipments satisfying allowable error tolerance of cadastral surveying specified in the special law for cadastral re-survey. The study results are as follows. By comparing current legislation for performance and allowable error tolerance of applicable equipments with provisions of the special law for cadastral re-survey, analyzed were where performance of equipments needs to be improved on cadastral re-survey project. Based on them, as primary control point surveying and detail surveying were separated, performance standard of equipments were presented. Results of this study may be utilized as basic materials for supply and demand program of surveying equipments on establishment of the basic plan for cadastral re-survey project.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.1
• /
• pp.89-95
• /
• 2009

The accuracy and efficiency of RTK-GPS is proved through its measurement, but it is not used in cadastral detail surveying, due to low accuracy caused by the trouble of satellite reception in a built-up area and lack of detailed guidelines for practical application. Thus, this study tries to offer detailed directions for the practical use of RTK-GPS by analyzing the application problem of RTK-GPS measurement. As results of the study, for the practical use of RTK-GPS it suggests enactment of regulations, connection of practical RTK-GPS measurement with the existing detail surveying methods, introduction of a VRS method for increasing the arrangement density of reference stations, and integrated use of GPS, GLONASS and Galileo satellites for securing accuracy and stability.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.1
• /
• pp.65-75
• /
• 2013

In this study, one of the main aims is to build up a technical foundation for promoting the cadastral resurvey effectively and to improve the accuracy of cadastral surveying is to make use of precise surveying techniques in allowance of position errors as reference accuracy in cadastral resurvey, which is proper to obtain the sufficient accuracy of the cadastral control points, and parcel boundary points by introducing the GNSS-based surveying techniques on cadastral survey. In detail, the existing procedures and outcomes of cadastral survey were compared and analyzed for suggesting a better survey technique than that of the other techniques in a variety of aspects of capability of cadastral survey. The new skills and supports could be upmost importance when doing cadastral survey. What's more, essentially, 'The Measurement Department' makes all the efforts to establish 'The Surveying Regulations'. This could possibly apply GNSS-based surveying technique to the cadastral resurvey for the foreseeable future and this research paper suggested that how to improve absolute accuracy of cadastral reference points by means of putting to use the appropriate models of measurement further.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.177-180
• /
• 2010

In cadastral field GPS mainly applies to fundamental survey, while there are numerous research about cadastral detail survey using GPS application in order to increase surveying efficiency as survey technology improve. The purpose of this experiment is to analyze the accuracy of position and estimate the efficiency of GPS/GLONASS combination surveying with control points. As the result of this experiment, Network RTK-GPS/GLONASS combination survey is superior to Newtork RTK-GPS with respect to position accuracy and work efficiency.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.8
• /
• pp.3478-3485
• /
• 2011

This study utilized the GPS data of the stations of triangulation of Changwon-si, Gyeongsangnam-do to conduct comprehensive analysis on tolerance level and regional characteristics. Based on this analysis, it was attempted to seek the method to derive more accurate result when further performing cadastral control point surveying for cadastral detail surveying. For the stations of triangulation installed at time of the land survey project, the study result showed that the most results of the stations of triangulation are stable if they were not moved naturally or artificially by themselves. Therefore, it was concluded that the stations of triangulation installed at the time of the land survey project should be preemptively selected for use of the given points when making decision of result of cadastral control point surveying. In addition, if the result of the cadastral control point surveying is made decision based on the stations of triangulation presented as the stable result in this study result, it seems that the same surveying result will be maintained and managed at all time, even if they are going to be further reinstalled due to loss of them.

• Journal of Cadastre & Land InformatiX
• /
• v.46 no.2
• /
• pp.313-323
• /
• 2016

Recently, "Cadastral Confirmation Surveying" has been established to promote efficiently and systematically its work. To do so, it is necessary that cadastral control point should be set up and transverse grid coordinates should be determined for high accuracy and boundary restoration based on the cadastral control point. This study expects the potentially institutional problem of detail surveying and the limitation of Network-Real Time Kinematic, introduced to measure the cadastral control point first in the issued regulation, and thus presents the improvement and the management of the block boundary of larger parcel as solutions. This can be applied promptly, when the location difference of ground and border, registered in cadastral record for quake and others, occurs. Thus, the public confidence of cadastral record may become higher and relevant social costs get reduced by the advanced prevention effect of boundary dispute, which represents much to the management of cadastral institution. Provided cadastral confirmation surveying is implemented with the management of the block boundary of larger parcel, proposed in this study.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.1
• /
• pp.37-42
• /
• 2009

The accuracy of RTK GPS is limited by the distance dependent errors from orbit, ionosphere and troposphere, as the distance between the rover and the base station increases in the Real Time Kinematic surveying. To solve this problem, VRS system has installed. This study would estimated the accuracy of cadastral detail surveying, which is used on the VRS RTK instead of Total Station and RTK GPS demand for various equipments and time. As a result of study, the positioning accuracy of the VRS RTK and RTK GPS surveying make no greate difference, as RMSE of VRS RTK surveying is 0.144m and that of RTK GPS surveying is 0.146m and the new method would be more efficient.