• 한국통신학회논문지
• /
• 제10권2호
• /
• pp.69-75
• /
• 1985

印章識別은 平滑化, 回轉 및 移動, 細線化整合技法의 순서로 수행된다. CCTV카메라에 入力된 印章映像은 A/D變換機와 8bit microcomputer에 의하여 $256{\times}256$畵素의 2進映像으로 변환한다. 두 映像을 定位置로 回轉시킨 후, 細線化過程을 거쳐 文字의 골격선을 찾는다. 畵素거리에 따라 Weight.를 정하고 distance-weighted Correlation, C를 계산한다. 계산된 $C^K$와 결정상수 $C_YES$, $C_NO$를 비교하여 印章을 識別한 결과 95%의 높은 識別率을 얻었고 한 개의 對象印章을 識別하는데 걸린 시간은 3분 이내였다.

• Journal of Oral Medicine and Pain
• /
• 제20권2호
• /
• pp.327-334
• /
• 1995

In order to observe the influence of pulsed Nd:YAG laser at its out-of-contact with dentin on tooth temperature, we have applied pulsed Nd:YAG laser to 2mm thick dentin sample at a point of contact and from a distance of 1mm, 2mm, 3mm and 4mm with an energy of 0.3W, 0.5W, 0.8W, 1.5W and 2.0W. They were exposed to periods of 3 seconds, 6 seconds, 9 seconds and 15 seconds respectively and measured temperature changes. The results as follows : 1. When the time ad intensity of power were constant, the temperature changes on dentin of tooth depended on the distance. The temperature increased when the laser intensity increased bu two other conditions were contact. 2. At the point of contact, the temperature has risen over $5^{\circ}C$ regrdless of intensity of the power or the time. However, there was $5^{\circ}C$ fluctuation with 0.3 W for 3 seconds treatment. 3. The temperature change was less than $5^{\circ}C$ thermal change at the distance of 1mm and 2mm respectively when lased for 3 seconds, 6 seconds, 12 seconds and 15 seconds with 0.3 W. Similar results were observed at 3 and 6 seconds treatment with 0.5 W and at 3 seconds treatment with 0.8 and 1.0W respectively. 4. It showed less than 5(C thermal change when lased for 3 seconds, 6 seconds, 9 seconds, 12 seconds and 15 seconds with 0.3W at the distance of 3mm and 4mm. The same results were seen in 3 seconds, 6 seconds and 9 seconds treatment with 0.5W and in 3 seconds with 0.8W and 1.0W respectively. As we have seen the above, the results has indicated that pulsed Nd:YAG lasing at its off contact on dentin of 2mm thickness will not cause irreversible changes if lasing intensity, lasing distance and lasing time are appropriate.

• 한국방사선학회논문지
• /
• 제5권3호
• /
• pp.121-125
• /
• 2011

본 연구는 방사선 치료실 벽면 거리에 따른 표층선량과 심부선량에 관하여 알아보고자 한다. 선형가속기에서 발생하는 고에너지 광자선은 치료기 헤드, 콜리메이터, 환자, 치료실내의 모든 벽과 물질들에 의하여 많은 산란선이 발생된다. 산란선의 측정은 열형광선량계(TLD)를 사용하였다. 선형가속기의 회전중심으로부터 벽까지의 거리는 236, 272, 303과 337 cm로 측정되었다. 6 MV 광자선을 100 cGy와 200 cGy를 조사한 결과 벽까지의 거리가 짧은 236 cm에서 표층선량은 0.49, 0.83 mSv이고, 272 cm에서는 0.41, 0.53 mSv, 303 cm에서는 0.28, 0.57 mSv, 337 cm에서는 0.33, 0.76 mSv로 각각 나타났다. 치료실 벽의 거리에 따라 표층선량은 현저한 차이를 나타내었다. 이러한 결과는 방사선 치료환자의 확률적영향과 관련하여 유용한 자료로 활용될 것이다.

• 한국컴퓨터정보학회논문지
• /
• 제27권8호
• /
• pp.185-194
• /
• 2022

이 연구는 장거리 승마운동이 비만중년여성들의 혈중지질, 아디포카인 및 염증지표에 미치는 영향을 분석하여 장거리 승마운동의 효과를 검증하고자 하였다. 이 연구의 대상자는 비만중년여성 9명으로 하였으며 수집된 자료는 대응표본T-검증을 이용하여 분석하였다. 이 연구의 결과는 다음과 같다. 첫째, 혈중지질성분은 장거리 승마운동 후 TC(p<.01), LDL-C(p<.01) HDL-C(p<.001)는 유의하게 증가하였다. 둘째, 아디포카인은 장거리 승마운동 후 Adiponectin은(p<.01) 유의하게 증가하였고, PAI-1은 통계적으로 유의하게 감소하였다(p<.01). 셋째, 염증지표는 장거리 승마운동 후 IL-6은 유의하게 증가하였다(p<.01). 이상의 결과에서 장거리 승마운동은 비만중년여성의 혈중지질 성분과 아디포카인, 염증지표의 변화에 긍정적인 효과가 있는 것으로 생각되며 이는 신체적, 정서적으로 큰 변화를 겪고 있는 중년여성의 비만예방 및 치료에 대한 장거리 승마운동의 효과를 부분적으로 검증한 것으로 생각된다.

• 대한화학회지
• /
• 제7권4호
• /
• pp.293-298
• /
• 1963

The crystal structure of ethylenediamine dihydrochloride has been determined by the two-dimensional Patterson methods and refined by two-dimensional Fourier syntheses. The unit cell dimensions are a = 4.44${\pm}$0.02, b = 6.88${\pm}$0.02, c = 9.97${\pm}$0.02 ${\AA}$, ${\beta}$ = 92${\pm}$$1^{\circ}$. The space group is $P2_1_{/c}$. The carbon and nitrogen atoms in the ethylenediamine itself lie on one plane and its structure has a trans-form with a centre of symmetry in it, and C-C distance of 1.54 ${\AA}$, C-N distance of 1.48${\AA}$ and C-C-N bond angle of $109.07^{\circ}$. The molecules are linked by N-H${\cdots}$Cl hydrogen bonds with distance of 3.14, 3.16 and 3.22 ${\AA}$ forming three dimensional network. The values of reliability factor for F(okl), F(hol) and F(hko) are 0.11, 0.10 and 0.09 respectively.

• Annals of Clinical Neurophysiology
• /
• 제19권1호
• /
• pp.28-33
• /
• 2017

Background: Previous studies of radial nerve conduction study (NCS) did not present how to measure the length of the radial nerve across the elbow, and did not even mention how to manage the spiral course of the nerve. This study aimed to applicate the most reliable method to measure the length of the radial nerve during NCS. Methods: Three points (A, B, and C) were determined along the relatively straight course of the radial nerve. The distance was measured using three different methods: L1) straight distance corresponding to the A-C distance, L2) sum of the distances corresponding to the A-B-C distance, L3) based on the L2, but the elbow is flexed at a $45^{\circ}$ angle. We compared the three methods of distance measurement and the calculated nerve conduction velocities (V1, V2, and V3) in normal healthy subjects. Results: 19 normal participants were enrolled. The mean value for method L1, L2 and L3 were $22.5{\pm}1.8cm$, $24.0{\pm}2.1cm$, and $23.2{\pm}2.1cm$ (p < 0.001). Calculated conduction velocities using those distance measurement methods as follows (p < 0.001): V1 ($60.9{\pm}2.7m/s$), V2 ($64.6{\pm}3.3m/s$), and V3 ($63.4{\pm}3.9m/s$). V2 was significantly greater than V1 and V3 (p < 0.001, p = 0.010, respectively). Conclusions: The distance measurement using a stopover point near the lateral epicondyle between two stimulus points in position of a fully extended elbow with forearm pronation is the most appropriate posture for radial motor NCS.

• Journal of Communications and Networks
• /
• 제12권2호
• /
• pp.122-129
• /
• 2010

Energy conservation is one of the most important issues for evaluating the performance of wireless sensor network (WSN) applications. Generally speaking, hierarchical clustering protocols such as LEACH, LEACH-C, EEEAC, and BCDCP are more efficient in energy conservation than flat routing protocols. However, these typical protocols still have drawbacks of unequal and high energy depletion in cluster heads (CHs) due to the different transmission distance from each CH to the base station (BS). In order to minimize the energy consumption and increase the network lifetime, we propose a new hierarchical routing protocol, distance aware intelligent clustering protocol (DAIC), with the key concept of dividing the network into tiers and selecting the high energy CHs at the nearest distance from the BS. We have observed that a considerable amount of energy can be conserved by selecting CHs at the nearest distance from the BS. Also, the number of CHs is computed dynamically to avoid the selection of unnecessarily large number of CHs in the network. Our simulation results showed that the proposed DAIC outperforms LEACH and LEACH-C by 63.28% and 36.27% in energy conservation respectively. The distance aware CH selection method adopted in the proposed DAIC protocol can also be adapted to other hierarchical clustering protocols for the higher energy efficiency.

• 대한수학회논문집
• /
• 제34권3호
• /
• pp.771-782
• /
• 2019

We show that mappings preserving unit distance are close to two-isometries. We also prove that a mapping f is a linear isometry up to translation when f is a two-expansive surjective mapping preserving unit distance. Then we apply these results to consider two-isometries between normed spaces, strictly convex normed spaces and unital $C^*$-algebras. Finally, we propose some remarks and problems about generalized two-isometries on Banach spaces.

• 유기물자원화
• /
• 제20권1호
• /
• pp.41-49
• /
• 2012

이형반응기 미생물연료전지(MFC) 시스템의 전기생산에 미치는 운전온도 및 전극간 거리의 영향에 관한 실험실 규모 실험을 수행하였다. 외부저항이 $(100\;{\Omega})$인 조건에서 시스템의 평균온도가 $30^{\circ}C$에서 $34^{\circ}C$로 증가할 때 외부저항 양단의 전압은 약 1.4배 증가하였다. 운전온도의 증가는 MFC의 OCV(open circuit voltage)를 증가시키며, 전극간 거리가 감소하고 운전온도가 증가함에 의해 최대전력이 얻어지는 전류가 상승하는 것으로 나타났다. MFC 시스템의 운전온도 증가에 의해 모든 전극간 거리조건에서 최대전력밀도가 크게 증가하였다. 시스템의 평균온도가 $4^{\circ}C$로 증가할 때 5~10 cm의 전극간 거리에서 얻어지는 최대전력밀도는 1.9~2.4배 증가하였고 동일한 온도조건에서는 전극간 거리가 감소할수록 전력수율이 증가하였다. MFC의 전기생산에 미치는 운전온도와 전극간 거리의 영향은 시스템의 내부저항과 밀접하게 관련되어 있는 것으로 나타났다. 즉, MFC의 운전온도가 증가하고 전극간 거리가 감소함에 의해 시스템의 내부저항이 감소함으로써 전기생산이 증가하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 A
• /
• pp.449-451
• /
• 2000

Arcing fault on overhead lines can be detected by amplitude of the arc voltage using numerical algorithm. In the case of transient fault, the arc voltage has any high value. In the case of permanent fault, the arc voltage is near zero. Thus, fault distance estimation should be performed by digital distance relay algorithm[3]. The purpose of this study is to build a structure for modeling of arcing fault detection and fault distance estimation algorithm using Matlab programming. Additionally, this algorithm has been designed in Graphical User Interface(GHI). So, this method using GUI interface of Matlab can reduce the number of simulation steps in modeling the distance relay.