• 수산해양기술연구
• /
• 제42권1호
• /
• pp.1-10
• /
• 2006

Present study was conducted to improve the spring frame net trap for conger eel, Conger myriaster which prevents by-catch and protects immature fish. A series of comparative fishing experiment was carried out in water off the south-east coast of Korea from Nov. 2004 to Jul. 2005. And analyzed the amount of catch, by-catch rate, and CPUE, etc. of experimental traps which were the spring frame net traps, sorted four types of flappers. And the compared gear was a plastic conger eel pot. The conclusions were as follows. By-catch rates of spring frame net trap with the compressed flapper bound by nylon mono-filament was about 0-3%. CPUE of spring frame net trap with the compressed flapper was about 50-60% lower than that of traditional and plastic pot. And in case of conger eel that the total length is over 350mm, CPUE was little different on each type of flapper of every mesh size.

• 수산해양기술연구
• /
• 제54권2호
• /
• pp.116-123
• /
• 2018

Pacific bluefin tuna (Thunnus orientalis) has been mostly caught by the Korean offshore large purse seine fishery in Korean waters. The annual catch of Pacific bluefin tuna caught by the offshore large purse seine fishery in Korean waters showed less than 1,000 mt until the 1990s except for 1997. The catch sharply increased to 2,401 mt in 2000 and recorded the highest of 2,601 mt in 2003, but the catch has generally decreased with a fluctuation thereafter. The main fishing ground of Pacific bluefin tuna of this fishery is formed around Jeju Island. However, it expanded to the Yellow Sea, the coastal of Busan, and the East Sea, which depends on the migration patterns of Pacific bluefin tuna by season. The CPUE standardization of Pacific bluefin tuna was conducted using Generalized Linear Model (GLM) to assess the proxy of the abundance index. The data used for the GLM were catch (weight), effort (number of hauls), catch ratio of Pacific bluefin tuna, moon phase by year, quarter and area. The standardized CPUE from 2004 to 2011, except for 2003 and 2010, showed a steady trend, and then increased until 2014. The CPUE in 2015 decreased, and in 2016 was higher than that in 2015. The result of GLM suggests that the effect of the catch ratio of Pacific bluefin tuna is the largest factor affecting the nominal CPUE.

• 기술혁신연구
• /
• 제13권2호
• /
• pp.97-131
• /
• 2005

This paper has discussed several issues regarding the barriers and opportunities for technological catch-up by the late-comer countries and firms. As one of the barriers to technological catch-up, the paper emphasizes the uncertainty involved with the third stage of learning how to design. The barriers arise because as the forerunner firms refuse to sell or give license to successful catching-up firms who thus have to design the product by themselves. The paper discusses how to overcome this barrier. It also notes that if the crisis of design technology is a push factor for leapfrogging, arrival of new techno-economic paradigm can serve as a pull factor for leapfrogging, serving as a winder of opportunity. The, it emphasized the two risks with leapfrogging, namely the risk of choosing right technology or standards and the risk of creating initial markets, and how to overcome these risks. It discusses how to overcome these risks in leapfrogging, and differentiates diverse forms of knowledge accesses. Then, the paper takes up the issue of whether there can be a single common or several models for catch-up. A common element of catching-up is to enter new markets segments quickly, to manufacture with high levels of engineering excellence, and to be first-to-market by means of the best integrative designs. This observation is supported by the fact that Korea and Taiwan has achieved higher levels of technological capabilities in such sectors as featured by short cycle time of technology. The possibility of two alternative models for catch-up is also discussed in terms of the key difference between Korean and Taiwan, especially in the position toward the source of foreign knowledge and the paths taken toward the final goal of OBM. Taiwan followed the sequential steps of OEM, ODM and OBN, in collaboration or integration with the MNCs. Korean chaebols jumped from OEM directly to OBM even without consolidating design technology.

• 수산해양기술연구
• /
• 제50권1호
• /
• pp.1-11
• /
• 2014

To compare the catches made using gillnets, trammel nets, and gillnets with supporting lines, several experiments were conducted with commercial vessels near Uljin and Pohang in Eastern Korea between July 2010 and May 2011. Two sets of 13 different nets were used, including 5 panels of gillnets and trammel nets each with stretched mesh sizes of 7.6, 9.1, 10.6, 12.1, and 13.6 cm and 3 panels of gillnets with a mesh size of 9.1 cm with supporting lines with different line spacing. The outer (stretched) mesh size of the trammel nets measured 51.5 cm. The target fishes of the fishing nets were various types of flounders. The catch rate of flounders was 50.7% of the total catch in weight. The total catch for all nets was 443.8 kg. The predominant species was pointhead flounder (Cleisthenes pinetorum). The total catch by trammel nets was 1.4 times that of the comparable gillnets. But more pointhead flounder were caught by gillnets than by trammel nets, though there was no significant difference. Fishermen catching the pointhead flounder in Korea said that there was no need to use trammel net to catch it; this was an unexpected finding compared to the findings of other flounder fisheries. The amounts of roughscale sole, brown sole, and blackfin flounder caught by trammel nets were greater than those caught by gillnets. The mean lengths (standard deviation) of blackfin flounder, pointhead flounder, brown sole, and roughscale sole were 21.0 (4.57), 22.9 (3.40), 24.7 (4.90), and 28.3 (5.43) cm, respectively; there were significant differences in mean length (p < 0.00001). Therefore, in order to catch flounder efficiently, the fishing nets and mesh size should be chosen according to the target species. One advantage of using supporting lines is that it prevents breakage by strengthening the material especially when utilized on a rough bottom. Catch by using gillnet with supporting lines was not greater than that by using trammel net for the conservation of fisheries resources.

• Ocean and Polar Research
• /
• 제42권2호
• /
• pp.157-169
• /
• 2020

This study aimed to analyze the effect of total allowable catches (TACs) on the target species. First to effects analyse of TACs, the 8 TAC target species and 75 non-target species were selected for which catch data were available before and after the introduction of the TACs. The 8 target species were simply compared to catch changes before and after TACs. Through the comparison, it was confirmed how the catches of target fishes have changed after the implementation of the TACs. Secondly, the Difference In Differences(DID) analysis was conducted to confirm the effects of the TACs on the catches of the target fishes using the catch data of 8 TAC target species and 75 non-TAC species. Finally, to overcome the limitations of the DID analysis, the random effects model was estimated to confirm the effects of the TACs on the catch of the TAC target species. Overall, this study confirmed that the TACs affects catches of target species, not only through simple comparisons of catches before and after the introduction of the TACs but also through econometric analysis.

• 수산해양기술연구
• /
• 제53권3호
• /
• pp.211-218
• /
• 2017

The catch performance of the silver-white jig for automatic jigging machine, developed to improve the effectiveness of LED fishing lamp in catching squid, was compared to that of the conventional green jig. The vessels used in this investigation were Haesong-ho (A-vessel), a training vessel of Gangwon State University and Haengbok-ho (B-vessel), a commercial fishing boat. In the case of the A-vessel, five to eight automatic jigging machines were used in the fishing operation with a 31.3 kW LED fishing lamp in summer. As for the B-vessel, fourteen automatic jigging machines were used with a 43.2 kW LED fishing lamp in autumn and winter. The results showed that the catch performance of the silver-white jig was similar to that of the green jig in the case of the A-vessel (p>0.05). However, in the case of the B-vessel, the catch performance of the silver-white jig was superior to that of the green jig in both winter (p<0.05) and autumn (P<0.001). Based on the catch performance results regarding the B-vessel in autumn, it is expected that the annual income increase that can be earned by using the silver-white jig will be KRW 26,385,000.

• 지식경영연구
• /
• 제17권2호
• /
• pp.27-50
• /
• 2016

Korean manufacturing industry have recently faced the catch-up of China in the mass commodity product, such as automotive, display, and smart phone in terms of market as well as technology. Accordingly, discussion on the importance of achieving catch-up in complex product systems (CoPS) has been increasing as a new innovation engine for the industry. In order to achieve successful catch-up of CoPS, we explored emerging technologies of CoPS, which are featured by the characteristics of radical novelty, relatively fast growth and self-sustaining, through the study of emerging technologies of gas turbine for power generation. We found that emerging technologies of the gas turbine are technologies for combustion nozzle and composition of electrical machine for increasing power efficiency, washing technology for particulate matter, cast and material processing technology for enhancing durability from fatigue, cooling technologies from extremely high temperature, interconnection operation technology between renewable energy and the gas turbine for flexibility in power generation, and big data technology for remote monitoring and diagnosis of the gas turbine. We also found that those emerging technologies resulted in technological progress of the gas turbine by converging with other conventional technologies in the gas turbine. It indicates that emerging technologies in CoPS can be appeared on various technological knowledge fields and have complementary relationship with conventional technologies for technology progress of CoPS. It also implies that latecomers need to pursue integrated learning that includes emerging technologies as well as conventional technologies rather than independent learning related to emerging technologies for successful catch-up of CoPS. Our findings provide an important initial theoretical ground for investigating the emerging technologies and their characteristics in CoPS as well as recognizing knowledge management strategy for successful catch-up of latecomers. Our findings also contribute to the policy development of the CoPS from the perspective of innovation strategy and knowledge management.

• 한국환경과학회지
• /
• 제16권8호
• /
• pp.897-906
• /
• 2007

Effect of seawater temperature (temperature) on the production of anchovy, Engraulis japonica and laver, Porphyra tenera Kjellman, were investigated in the eastern part of South Sea of Korea (ESS). Bimonthly temperature data (Feb., Apr., Jun., Aug., Oct., Dec.) from 1980 to 2002 were collected from Korean Oceanographic Data Center (KODC) and monthly anchovy catch and laver production from 1980 to 2002 were used from published sources by the Ministry of Maritime Affairs & Fisheries, Korea. Effects of temperature on the two organisms were examined in four cases. In case of lower anchovy catch and higher laver production (1993), temperature during main spawning season of anchovy was about $0.2-0.6^{\circ}C$ lower than normal condition, and temperature during seed collecting season of laver in Namhaedo, Kojedo went down below $22.0^{\circ}C$. In case of higher anchovy catch and higher laver production (1995), optimum temperature for catch was formed in main fishing ground, temperature for seed collection was lower than $22.0^{\circ}C$, In case of lower anchovy catch and lower laver production (1996), temperature for spawning and catch was about $0.6-1.6^{\circ}C$ lower than normal condition, and temperature during seed collection in nursery was about $0.5-1.0^{\circ}C$ higher than optimum temperature for seed collection. In case of higher anchovy catch and lower laver production (1998), temperature during main fishing and spawning season was about $1.0-1.8^{\circ}C$ higher than normal condition, and temperature during laver seed collection in nursery was $1.5^{\circ}C$ higher than optimum temperature for seed collection.

• 수산해양기술연구
• /
• 제47권4호
• /
• pp.300-315
• /
• 2011

The investigation for the catch and species composition in the deep sea of the East Sea was done to search marine organisms using some kinds of traps with small commercial fishing vessel near Goseong, Korea from 2008 to 2009. The experiments was carried out with some different traps at the depth of 200m, 400m, 700m and 1,000m. In 2008, the amount of catch with rectangular, cone and drum net traps was 91.4kg with twelve trips and the proportion of catch with rectangular and cone traps was high. Dominant species caught were Aniwan whelk (57%), snow crab (12%), hunchback sculpin (7%) and red snow crab (5%). The catch of Aniwan whelk was done well with rectangular and cone traps at the depth of 700-1,000m. Snow crab was mainly caught with rectangular and cone traps at the shallower depth of 200m, while red snow crab caught a lot with cone trap at the deeper depth of 700m. In 2009, the amount of catch with rectangular, cone and round traps was 92.4kg with nine trips. The proportion of catch with round trap was higher than that with cone trap. Dominant species caught were snow crab (67.1%), Aniwan whelk (14.8%) and northern shrimp (9.8%). Snow crab was caught well with round trap at the depth less than 400m.

• 기술혁신연구
• /
• 제24권2호
• /
• pp.21-56
• /
• 2016

그간 우리나라 등 후발주자의 추격과 그 성과에 대해 다양한 연구가 수행되었으나, 후발주자가 개발한 제품의 아키텍처가 추격 성과에 미친 영향에 대한 논의는 극히 부족하였다. 또한 공작기계의 움직임을 자동으로 제어하는 핵심 부품인 수치제어장치 분야에서 우리나라는 반도체, 조선, 자동차 산업과 달리 과거 40년에 가까운 기간 동안 다양한 개발체제 운영과 정부 지원에도 불구하고 제한적인 추격 성과를 보이거나 추격에 실패하였다. 이에 따라 본 연구에서는 우리나라 공작기계 수치제어장치 개발 사례를 중심으로 제품 아키텍처가 추격 성과에 미친 영향을 탐색적으로 고찰하였으며, 이를 위해 동 분야의 후발주자임에도 불구하고 세계 선도 기업으로 성장한 일본 화낙의 수치제어장치 아키텍처 진화 사례에 대한 심층 분석을 병행하였다. 연구결과 일본 화낙은 1980년대 중반 이후 수치제어장치 아키텍처의 개방형 모듈화를 달성함으로써 다양한 공작기계 생산 기업의 요구 사항에 부응하면서 대량 생산을 통한 원가 절감이 가능한 수치제어장치를 개발 생산하는 데 성공하였다. 이를 통해 화낙은 시장 점유율 확대 및 뛰어난 성과를 달성하였음을 발견하였다. 반면 우리나라는 1970년대 말 이후 약 40년 간의 추격 노력에도 불구하고 수치제어장치 아키텍처의 개방형 모듈화를 달성하지 못함으로 인해 다양한 수요 기업이 생산하는 공작기계에 채택되는데 실패하였으며, 결과적으로 제한된 추격 성과에 그치고 말았다. 또한 이러한 제한적인 추격 성과는 개발 주체의 파산과 매각, 폐쇄 등으로 이어지면서 기술적 지식의 누적에 큰 어려움을 겪었으며, 이로 인해 수치제어장치 아키텍처의 개방형 모듈화를 달성할 수 있는 만큼의 기술을 축적하거나 설계 역량을 확보하지 못했음을 발견하였다. 본 연구 결과는 제품 아키텍처 관점에서 후발주자의 추격 성과를 규명하고, 성공적인 기술 추격에도 불구하고 시장추격에 실패하는 원인을 규명할 수 있는 이론적 기반을 구축하는 데 그 의의가 있다.