• 한국ITS학회:학술대회논문집
• /
• v.2006 no.10
• /
• pp.154-159
• /
• 2006

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.3
• /
• pp.12-23
• /
• 2007

The purpose of this studγ if to understand problem of present bus scheduling system and to develop optimal bus scheduling model which improve bus passenger's degree of satisfaction(DOS) and bus company's operation efficiency at the same time. This study developed optimal bus scheduling model, which reflected bus passenger's degree of satisfaction(DOS), applied to existing model that summery of bus operation cost($C_o$), passenger queuing time cost($C_{pw}$) and passenger travel time cost($C_{pl}$). And optimal bus scheduling model which developed in this study is optimized that using LINGO program based on linear program. Also by using the general case in Busan, compare total cost of present bus scheduling system and existing scheduling model with total cost of optimal bus scheduling model which reflected bus passenger's degree of satisfaction(DOS).

• Journal of Korean Society of Transportation
• /
• v.20 no.1
• /
• pp.7-18
• /
• 2002

To activate public transportation service, Bucheon City built Bus Information System based on Beacon type, and operates it for no.22 line. This research analyzes an effect of BIS operations, and mainly it analyzes far reliability evaluation of bus arrival time information and passenger satisfaction about BIS. As results of reliability evaluation of arrival time information service, it is proven to be practically inappropriate to use as arrival time data because it is not only travel time between each bus stop but also previous travel time history data. In order to improve this matter, neural network model was evaluated as the most outstanding one as result of experiment in applying current arrival time Prediction model. This research cannot help limiting for evaluation of operation effect in Bucheon City because there is no Bus Information System based on GPS type in Korea. For the future ITS model city, in the case of building ITS model city based on GPS type, it is possible to compare two systems relatively. In addition to that, fur the consideration of reliability of bus arrival time information, it is required to develop Predictable model and research factors that affect to bus operation.

• Journal of the Korean Society for Railway
• /
• v.16 no.1
• /
• pp.59-64
• /
• 2013

This study analyzed passenger access and egress travel patterns related to a Korean regional railway station (Seoul station), then developed a binomial logit model. This model referred to bus and metro mode of access and egress during a national holiday (Chuseok 2009); obtained from transit smart card data. The results showed that 99% of passengers getting access to, or egress from, the regional railway station did so using less than two transfers, and that most passengers were more likely to choose a metro. However, the passengers that made access or egress trips near Seoul Station were more likely to take a bus. From the results of the mode choice model, it was found that the impact of travel time was greater than that of travel cost, in the choices made for both access and egress. Interestingly, the impact of travel time is much greater in choosing the mode of egress.

• Journal of Korean Society of Transportation
• /
• v.29 no.6
• /
• pp.107-116
• /
• 2011

In this paper, we implement an algorithm of transit signal priority control that not only maximizes service quality and efficiency of bus, but also minimizes the control delay of passenger cars using UTIS currently being deployed and operated in Seoul national capital area. For this purpose, we propose an algorithm that coordinates the strength of TSP by estimating bus demand. Typically, the higher the strength of TSP is on main street, the bigger the control delay is on the cross street. Motivated by this practical difficulty, we proposes an algorithm that coordinates TSP's strength by checking the degree of saturation of cross street. Also, we verify the possibility of field implementation via simulation analysis using CORSIM RTE based HILS (Hardware In the Loop Simulation). The result shows that travel time of bus improves about 10 percent without increasing control delay of passenger cars by TSP. We expect the result of this research to contribute to increasing the overall transit ridership in this country.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.1D
• /
• pp.1-9
• /
• 2009

Bus information system(BIS), as a part of the intelligent transportation system(ITS), is one of the most advanced public transportation systems which provide the real-time bus traffic information for the users waiting the buses at the bus stop. However, correct bus information data, such as the present bus location, the user waiting time, the bus arrival time, etc. are not provided for the bus users because the proper bus arrival time predictive models are not used yet in most of the cities operating the bus information system, including the metropolitan City of Ulsan. Thus, the purpose in this study is to investigate real-time bus traffic characteristic data for identifying the bus operation characteristics on the arterial under the study in the metropolitan City of Ulsan, analyze real-time bus traffic characteristic data on the ID locations of the arterial under the study, construct the optimal unit segment models for the unit segments which are the bus stop, node and travel section using the exponential smoothing, weighted smoothing and Kalman Filter methods, respectively, and finally suggest the optimal integrated model for predicting the real-time bus arrival time at the bus stop of the arterial under the study.

• Journal of Korean Society of Transportation
• /
• v.28 no.1
• /
• pp.135-142
• /
• 2010

The convenient techniques for predicting the bus arrival time have used the data obtained from the buses belong to the same company only. Consequently, the conventional techniques have often failed to predict the bus arrival time at the downstream bus stops due to the lack of the data during congestion time period. The primary objective of this study is to overcome the weakness of the conventional techniques. The estimation model developed based on the data obtained from Bus Information System(BIS) and Bus management System(BMS). The proposed model predicts the bus arrival time at bus stops by using the data of all buses travelling same roadway section during the same time period. In the tests, the proposed model had a good accuracy of predicting the bus arrival time at the bus stops in terms of statistical measurements (e.g., root mean square error). Overall, the empirical results were very encouraging: the model maintains a prediction job during the morning and evening peak periods and delivers excellent results for the severely congested roadways that are of the most practical interest.

• Journal of Korean Society of Transportation
• /
• v.26 no.3
• /
• pp.97-108
• /
• 2008

Like always selecting anything in everyday lives, We must choose a travel mode to achieve its purposes driven by diverse factors such as travel distance and accessibility of public transit. Assuming that they are differentiated depending on whether a travel purpose is commuting, shopping or leasure, the study investigated their distinguished impacts on travel mode choice by using binary logit models by travel purpose and mode. Identifying that travel time has an important role in choosing a travel mode whether its purpose is any, the results show that longer travel time tends to increase the possibilities of taking public transit, transfer and rail transit rather than bus. In addition, the easy use of a car and its parking to travelers is more important in their choosing an automobile as a travel mode than other factors. In the models of identifying the probability of mode choice between bus and rail transit, we find that its choice tends to be decided by travelers depending on whether any public transit mode is more accessible to them. When comparing the results among travel purposes, we identify that the easy use of a car and parking in their destination is more important for commuting, while accessibility of public transit in their origination increases the probability of taking a transit mode.

• Journal of the Korean Regional Science Association
• /
• v.33 no.1
• /
• pp.29-41
• /
• 2017

This study proposes an integrated accessibility measurement algorithm, which is applied to the Seoul Metropolitan public transportation system consisting of bus and subway networks, and analyzes the result. We construct a public transportation network graph linking bus-subway networks and take the time distance as the link weight in the graph. We develop a time-distance algorithm to measure the time distance between each pair of transit stations based on the T-card transaction database. The average travel time between nodes has been computed via the shortest-path algorithm applied to the time-distance matrix, which is obtained from the average speed of each transit route in the T-card transaction database. Here the walking time between nodes is also taken into account if walking is involved. The integrated time-distance accessibility of each node in the Seoul Metropolitan public transportation system has been computed from the T-card data of 2013. We make a comparison between the results and those of the bus system and of the subway system, and analyze the spatial patterns. This study is the first attempt to measure the integrated time-distance accessibility for the Seoul Metropolitan public transportation system consisting of 16,277 nodes with 600 bus routes and 16 subway lines.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.3
• /
• pp.663-670
• /
• 2015

In most public transportation related master plans, decisions for investment priorities are initially made by facilities with lower installation rates or lower satisfaction (performance) levels. In general, the decisions are made without conducting importance factor analysis. In this study, a combined method of importance-performance analysis (IPA) model for bus users related in travel time is proposed by using Structural Equation Model (SEM). The results of the IPA for Metropolitan users show that the categories need improvement are number of bus stops, number of intersections, headways, waiting times for boarding and traffic signal operations in order. On the other hand, Non-Metropolitan uses show that the categories need improvement are traffic signal operations, waiting times for boarding, headways, bus exclusive lanes and number of intersections that is in reverse order to Metropolitan users.