• International Journal of Highway Engineering
• /
• v.15 no.5
• /
• pp.135-144
• /
• 2013

PURPOSES : The purpose of this paper is to develop a methodology to estimate level of service of arterial including Exclusive Median Bus Lanes. METHODS : On 6 Exclusive Median Bus Lanes routes in Seoul, bus travel time and number of bus-stop per km were investigated. Also whether or not passing lane exists at bus-stop was checked. Based on the data from sites, bus travel time was estimated according to length of segment, number of bus-stop per km and whether or not passing lane exists at bus-stop. RESULTS : A bus travel time table was developed according to length of segment, number of bus-stop per km and whether or not passing lane exists at bus-stop. After bus travel speed and passenger car travel speed is estimated based on each travel time table and length of segment, two speeds are combined with weighted average speed using traffic volume of each lane group. Then weighted average speed is a measure of effectiveness of arterial including Exclusive Median Bus Lanes. CONCLUSIONS : It can be concluded that the proposed methodology can estimate level of service of arterial including Exclusive Median Bus Lanes considering the operation characteristics of Exclusive Median Bus Lanes.

• Journal of Korean Society of Transportation
• /
• v.23 no.7 s.85
• /
• pp.63-74
• /
• 2005

When we introduce the BRT systems, it is very important to decide the operating factors, such as bus-stop locations or headway. If the factors are inappropriate, unessential expenses for the operator and users of the bus line may be caused, and it leads increase of social total cost. So, it is necessary that we consider users' origin and destination of each bus line when we set location of bus-stops and the optimal headway. Meanwhile, Smart Card System was introduced of fare collection for the Public Transportation Reform in Seoul last year. This new card system makes it possible to store up the information about bus operating and passenger's trip link. With these substantial information. we can estimate bus-stop-based O-D table. So, in this thesis, it was studied a systematic methodology to find the optimal location and headway for skip-stop bus system (as a type of first step for BRT). The proposed methodology in this thesis is expected to be useful to effect analysis or setting operating factors for skip-stop bus system in each bus line.

• International Journal of Highway Engineering
• /
• v.17 no.6
• /
• pp.33-36
• /
• 2015

PURPOSES : It is desirable for buses to be parallel to the face of the bus shelter at a bus stop. In this way, passengers can safely use the buses without moving into the vehicle area. The study was a review of the current bus bay geometric guidelines, to determine whether they lead buses to stop parallel to the face of the bus shelter by analyzing vehicle trajectory. METHODS : A commercial software program for vehicle trajectory analysis was used under our assumptions about bus dimensions and geometric values. The final position of the bus was analyzed for multiple trajectory simulations, reflecting various geometric alternatives. RESULTS : Within the scope of the study, we concluded that the current design guidelines need to be revised by the design values suggested by the study. CONCLUSIONS : The results of the study suggested alternative design values for bus bay geometry, based on the assumption that buses should be parallel to the face of the bus shelter in order to prevent passengers from moving into the vehicle area.

• Land and Housing Review
• /
• v.12 no.3
• /
• pp.39-50
• /
• 2021

This research aims to provide guidelines with the appropriate type of smart bus stop to reduce the concentration of fine dust. To this end, we divided smart bus stops into two types: closed and open bus stops. The estimated reduction effect was compared and analysed by measuring the estimated PM₁₀ and the estimated PM_2.5 at five locations inside and outside a smart bus stop located in Gangnam gu, Seoul. The effect of reducing the amount of the fine dust concentration in external space was insignificant for both types of bus stops. The different effect of reducing the concentration of the amount between in internal space was relatively significant: the fine dust concentration was 26.0 ㎍/m³ for PM₁₀ and 20.2 ㎍/m³ for PM_2.5 at open-type bus stops; whilst was 2.4 ㎍/m³ for PM₁₀ and 1.8 ㎍/m³ for PM_2.5 at closed type bus stops. Based on the findings, a closed type bus stop is recommended when considering the cost of reducing fine dust. In addition, due to the ineffectiveness of reducing the amount of fine dust from the outside of the bus stop, additional provision of smart bus stops is required particularly in locations where demand exceeds the capacity of the inside. A clear definition of smart bus stop and it's minimum standard should also be considered.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.5
• /
• pp.873-882
• /
• 2017

Smart cards are currently used in about 150 locales, including the metropolitan ares, and are utilized as a policy base for various public areas, including public transportation, bus fares, and public transportation requirements. However, excluding the metropolitan area and some metropolitan areas, there are many areas where the existing BIS data was unable to match station information on the data and Smart cards itself are not available on the bus stop information by the line. The purpose of this research was to produce bus stop information generated by the bus stop based on the bus route, and the actual stop information generated by the model presented in the study was derived by matching the actual station information.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.23 no.2
• /
• pp.89-105
• /
• 2024

Bus stop improvement conveys users their usability. It is essential that transportation jurisdictions should identify quantitative effects of a bus stop improvement to invest effectively and expand consistently. Nevertheless, there is currently no research to estimate the quantitative effect on bus stops improvement. In this study, the willingness to pay and the benefit-cost ratio for the bus stops improvement were estimated through a contingent valuation method based on user satisfaction. It was found that the bus stop improvement located in urban areas can achieve high-cost benefits, and it in suburban areas has a great impact on improving the quality of life of local residents. The results of this study will be used as a basis for expanding the bus stop facility improvement project.

• Journal of Korean Society of Transportation
• /
• v.33 no.2
• /
• pp.170-181
• /
• 2015

This study explores passengers' travel characteristics at six bus stops on the Seoul Ring Expressway using smart traffic card data. Based on the characteristics, political strategies to improve bus facilities on expressway are suggested. Firstly, among them two bus stops of Guri and Uiwang-Cheonggye have higher transfer rate of passengers, 37.56% and 36.9% of the total intercity (red) bus passengers on the expressway, respectively. Secondly, Uiwang-Cheonggye bus stop has the highest transfer rate, and Guri bus stop has also higher transfer rate and the highest on-and-off passengers. It implies that both bus stops need to be prioritized for improving bus stop facility, access roads, and connection facility between the bi-directional stops. Thirdly, Guri (down) bus stop has relatively longer waiting time for transfer, thus shorter bus headways running the bus stop should be considered. Lastly, most passengers using both stops come to and from Bundang-gu in Geongnam City. Overall, the results of this study would be helpful for transport planners to develop effective bus route policies and bus operation.

• Journal of Digital Contents Society
• /
• v.19 no.6
• /
• pp.1091-1096
• /
• 2018

The purpose of this paper is to provide a convenient platform for bus users and a platform to provide tourist services suitable for bus tourism as integrated services. Recently, the number of FIT tourists for recreational purposes using public transportation is increasing as the bus use environment is improved. Accordingly, we need a tourist platform that meets the needs of tourists. In particular, a bus information providing algorithm is implemented using a bus information public API to more conveniently use the bus information providing system, and a user use behavior data collection module and a data mining module To develop a contents platform based on a bus stop for bus tourism services to FIT tourists using public transportation.

• International Journal of Highway Engineering
• /
• v.15 no.6
• /
• pp.135-141
• /
• 2013

PURPOSES : The lack of details of design guideline for zig-zag shaped section approaching central bus stop leads an traffic accident proneness. So, this study analysed the geometric elements of central bus stop area in terms of vehicle dynamics and suggested design alternatives. METHODS : The study analysed a dynamic behaviour of bus moving in and out of zig-zag shaped section using Auto-Turn under scenarios. Based upon dynamic analysis, the study found out the width of overtaking lane is the most influential factor for a safe moving at zig-zag alignment. RESULTS : The width of overtaking lane at design speed of 40, 50, and 60 km/h respectively was suggested given taper ratio of 1 to 10 required for Bus Rapid Transit (BRT), and the lane width is not wider than 4.0m which possibly makes two vehicles using the same lane. Also, the width of overtaking lane which mitigates the taper ratio was suggested with the same restriction about the maximum lane width. CONCLUSIONS : The results of the study can be used to prepare a design guideline on zig-zag shaped alignment of central bus exclusive lanes. The more stable moving is expected by applying the design alternatives suggested, therefore the lower rate of traffic crashes at the vicinity of central bus stops.

• Journal of Korean Society of Transportation
• /
• v.24 no.1 s.87
• /
• pp.97-108
• /
• 2006

At present, Korean many cities depend on subjective judgements of experts to estimate the number of bus-stops and inter-stop space. To get reliable results by using more objective procedure, we search for old studies and models, but they don't concern alighting demands and a random demand distributions. Our study recognize and overcome these limitation. We devide the demand into boarding and alighting demands, and define the model that can estimate flexibly optimal number of bus-stop and inter-stop space on each segment by the demand distribution. Also we apply this new model to a simple example route having various demand distributions As a result, the number of bus-stop on each segment can be estimate flexibly in proportion to boarding or alighting demand by using this model.