• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.2
• /
• pp.294-301
• /
• 2013

OFDM technique uses multiple sub-carriers for the data transmission. Therefore, bit error rate increases because of inter-carrier interference caused by nonlinear high power amplifier and carrier frequency offset. Wireless OFDM transmission over multi path fading channels is characterized by small transmission gain in multiple sub-carrier frequency interval. Therefore bit error rate increases because of burst errors. Inter-leaver and convolution error control coding are effective for the reduction of this burst error. Pilot symbol is used for the channel estimation in OFDM systems. However, imperfect channel estimates in this systems degrade the performance. The performance of this convolution coding OFDM systems using inter-leaver, gauged by the bit error rate, is analyzed considering the nonlinear high power amplifier, carrier frequency offset and channel estimation error.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.6
• /
• pp.43-48
• /
• 2012

In As the proliferation of wireless LAN and smart devices like smart phone, the importance of the wireless Internet local broadcasting service is increasing. In order to provide broadcasting data for the multiple devices, one-way roadcasting technology which could not support re-transmission, should be used and the receiving frame error is major problem. Furthermore unlicense devices cause interference to the receiver, burst frame error tends to be happened. In this paper, new method to overcome the burst and random frame error is proposed and the effect is analyzed.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.28A no.5
• /
• pp.339-346
• /
• 1991

In this paper the performance of communication system in the electrical power line using error correcting codes is analysed. The BCH codes and interleaved code are to be used for correcting burst and random errors in the power line channels. The data rate of 2400 bps and the carrier frequency of 12KHz are assumed. Actual power line noise is recorded and simulated in the BPSK PLC system model.

• Journal of applied mathematics & informatics
• /
• v.9 no.1
• /
• pp.231-238
• /
• 2002

In this paper, we study cyclic codes detecting a subclass of close-closed loop bursts viz. low-density close-closed loop bursts. A subclass of CT close-closed loop berets called CT low-density close-closed loop bursts is also studied.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.858-864
• /
• 2019

A clock system is proposed to eliminate data loss due to frequency difference between sensor nodes in a sensor utility network. The proposed clock system for each sensor node consists of a bust clock-data recovery (CDR) circuit, a digital phase-locked loop outputting a 32-phase clock, and a digital frequency synthesizer using a programmable open-loop fractional divider. A CMOS oscillator using an active inductor is used instead of a burst CDR circuit for the first sensor node. The proposed clock system is designed by using a 65 nm CMOS process with a 1.2 V supply voltage. When the frequency error between the sensor nodes is 1%, the proposed burst CDR has a time jitter of only 4.95 ns with a frequency multiplied by 64 for a data rate of 5 Mbps as the reference clock. Furthermore, the frequency change of the designed digital frequency synthesizer is performed within one period of the output clock in the frequency range of 100 kHz to 320 MHz.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.5
• /
• pp.445-454
• /
• 2015

As the feature sizes and the operating charges continue to be scaled down, multi-bit soft errors are becoming more critical in SRAM designs of a few nanometers. In this paper, we propose an efficient error detection technique to reduce the size of parity bits by applying a 2D bit-interleaving technique to 3D bit-partitioned SRAM devices. Our proposed bit-interleaving technique uses only 1/K (where K is the number of dies) parity bits, compared with conventional bit-interleaving structures. Our simulation results show that 1/K parity bits are needed with only a 0.024-0.036% detection error increased over that of the existing bit-interleaving method. It is also possible for our technique to improve the burst error coverage, by adding more parity bits.

• Journal of Advanced Navigation Technology
• /
• v.9 no.2
• /
• pp.156-163
• /
• 2005

In this paper, we analyzed the performance of VDL mode 3 system model whose specification is defined by ICAO(International Civil Aviation Organization). For performance evaluation, we obtained BER(Bit Error Rate), transmission delay time, burst retransmission rate and throughput. From the analysis result, we could explicitly define relationships among BER, transmission delay time, throughput and burst restransmission rate. In addition, it became known that V/D retransmission rate and throughput are closely related in down link channel.

• Journal of IKEEE
• /
• v.2 no.2 s.3
• /
• pp.285-293
• /
• 1998

This paper presents unequal error protection and error concealment techniques far robust H.263 video transmission over mobile channels. The proposed error protection scheme has three major features. First, it has the capability of preventing the loss of synchronization information in H.263 video stream as much as possible that the H.263 decoder can resynchronize at the next decoding point, if errors are occurred. Secondly, it employs an unequal error protection scheme to support variable coding rates using rate compatible punctured convolutional (RCPC) codes, dividing the encoded stream into two classes. Finally, a macroblock-interleaving scheme is employed in order to minimize the corruption of consecutive macroblocks due to burst errors, which can make a proper condition for error concealment. In addition, to minimize the spatial error propagations due to the variable length codes, a fast resynchronization scheme at the group of block layer is developed for recovering subsequent error-free macroblocks following the damaged macroblock. futhermore, error concealment techniques based on both side match criterion and overlapped block motion compensation (OBMC) are employed at the source decoder so that it can not only recover the lost macroblock more accurately, but also reduce blocking artifacts. Experimental results show that the proposed scheme can be an effective error protection scheme since proper video quality can be maintained under various channel bit error rates.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.9
• /
• pp.10-16
• /
• 2011

Interleaving is applied to prevent from exceeding the error-correction capability of channel code. At the receiver, burst errors are converted into random errors after deinterleaving, so the error-correction capability of channel code is not exceeded. However, when a receiver does not have any information on parameters used at an interleaver, interleaving can be seen as an encryption with some pattern. In this case, deinterleaving becomes complicated. In the field of blind deinterleaving, there have recently been a number of researches using linearity of linear block code. In spite of those researches, since the linearity is not applicable to a convolutional code, it is difficult to estimate parameters as in a linear block code. In this paper, we propose a method of blind block deinterleaving using convolutional code reconstruction method.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.788-791
• /
• 2005

In this paper, We propose performance of improvement method for eHDR-WPAN system using Interleaver. Burst error pattern caused by fading in indoor wireless channel. for the reason, using of Interleave method (make burst error to random error) can be enhance to error-rate in system. This paper is used Convolutional, Block, Random Interleaver. We make use of 9 and 27 for symbol spacing. Block-Interleaver is show that performance about 0.6dB of E$_b$/N$_o$ at $10^{-4}$. In result, the suitable Interleaver for eHDR-WPAN system is Block Interleaver of 9 symbol spacing.