• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.11_12
• /
• pp.629-638
• /
• 2005

In the System on a Chip design, the on chip bus is one of the critical factors that decides the overall system performance. Especially, in the case or reusing the IPs such as processors, DSPs and multimedia IPs that requires higher bandwidth, the bandwidth problems of on chip bus are getting more serious. Recently ARM proposes the Multi-Layer AHB BusMatrix that is a highly efficient on chip bus to solve the bandwidth problems. The Multi-Layer AHB BusMatrix allows parallel access paths between multiple masters and slaves in a system. This is achieved by using a more complex interconnection matrix and gives the benefit of increased overall bus bandwidth, and a more flexible system architecture. However, there is one clock cycle delay for each master in existing Multi-Layer AHB BusMatrix whenever the master starts new transactions or changes the slave layers because of the Input Stage and arbitration logic realized with Moore type. In this paper, we improved the existing Multi-Layer AHB BusMatrix architecture to solve the one clock cycle delay problems and to reduce the area overhead of the Input Stage. With the elimination of the Input Stage and some restrictions on the arbitration scheme, we tan take away the one clock cycle delay and reduce the area overhead. Experimental results show that the end time of total bus transaction and the average latency time of improved Multi-Layer AHB BusMatrix are improved by $20\%\;and\;24\%$ respectively. in ease of executing a number of transactions by 4-beat incrementing burst type. Besides the total area and the clock period are reduced by $22\%\;and\;29\%$ respectively, compared with existing Multi-layer AHB BusMatrix.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.9
• /
• pp.1719-1729
• /
• 1994

In this paper, an adaptive CAC(Connection Admission Control) method is proposed. The adaptive CAC uses traffic estimates derived from both traffic parameter specified by user and cell flow measurements. Traffic estimation using user-specified parameters is performed at every moment of connection request or connection release by recursive formula which makes real-time calculation possible. Traffic estimation using cell flow measurement is carried out when the number of connected calls does not change during a measurement reflection period-renewal period. The most import ant thing for the traffic estimation using cell flow measurement is the determination of the length of a renewal period to trace a real traffic flow with an allowable time lag and the measurement reflection ratio(MRR) both to reduce the portion of overestimation and to avoid underestimation of real traffic flow. To solve these problems, the adaptive CAC updates renewal period and MRR adaptively according to the number of connections and the elapsed time after last connection or release respectively. Performance analysis for the proposed method is evaluated in several aspects for the cases of both homogeneous and heterogeneous bursty traffic. Numerical examples show the adaptive CAC method has the better performance compared with conventional CAC method based on burst model from the both utilization and QOS point of view.

• Journal of Conservation Science
• /
• v.25 no.2
• /
• pp.161-169
• /
• 2009

The objective of this study was to investigate stability of Korean Paper(Hanji) which is being sold in the Korean markets according to aging treatment. In order to know the aging characteristics, the optical and mechanical properties of before and after wet and dry-heat aging treatment were examined. The optical and mechanical properties were shown higher reduction in the dry-heat aging treatment compared to the wet-heat aging treatment. The Soonji (pure mulberry Hanji) made from black mulberry bast pulp was shown a great reduction of the brightness and whiteness, and increase of the opacity in the aging treatment. On the other hand, in case of mechanical properties, the breaking length of Soonji made from white mulberry bast pulp was significantly higher than that of the others, and the tensile strength was shown drastic reduction in according to Soonji made from black mulberry bast pulp in the aging treatment. The burst strength of Soonji made from black and white mulberry bast pulp was shown the similar value in the wet-heat aging treatment. The folding endurance of Soonji made from white mulberry bast pulp was significantly higher than that of others before and after aging treatment. Consequently, Hanji was affected sensitive in the temperature compared to the humidity. Meanwhile, the density and color of the chinese ink was no significant changes before and after wet and dry-heat aging treatment.

• Journal of Astronomy and Space Sciences
• /
• v.22 no.4
• /
• pp.377-384
• /
• 2005

Since gamma-ray bursts(GRBs) have been first known to science societites in 1973, many scientists are involved in their studies. Observations of GRB afterglows provide us with much information on the environment in which the observed GRBs are born. Study of GRB afterglows deals with longer timescale emissions in lower energy bands (e.g., months or even up to years) than prompt emissions in gamma-rays. Not all the bursts accompany afterglows in whole ranges of waveleogths. It has been suggested as a reason for that, for instance, that radio and/or X-ray afterglows are not recorded mainly due to lower sensitivity of detectors, and optical afterglows due to extinctions in intergalactic media or self-extinctions within a host galaxy itself. Based on the idea that these facts may also provide information on the GRE environment, we analyze statistical properties of GRB afterglows. We first select samples of the redshift-known GRBs according to the wavelength of afterglow they accompanied. We then compare their distributious as a function of redshift, using statistical methods. As a results, we find that the distribution of the GRBs with X-ray afterglows is consistent with that of the GRBs with optical afterglows. We, therefore, conclude that the lower detection rate of optical afterglows is not due to extinctions in intergalactic media.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.15 no.2
• /
• pp.49-54
• /
• 2009

The effects of filling temperatures of broth and degassing method on the residual oxygen content and gas composition in the pouch and physical strength of packaging material for Samgyetang depending on the contamination of broth on the sealing layer and sterilization process were investigated. The residual oxygen content in the broth and the oxygen proportion in the headspace of package were decreased with the increase of broth temperature at filling into the pouch from 50 to 100. When the products were packaged as air-contained (Air), manually squeezed the upper side of package out to minimize the headspace (Degas) and flushed with nitrogen gas ($N_2$-Flushing) while maintaining the broth temperatures of Samgyetang at 50 or 85. The residual oxygen content and oxygen proportion were increased in the order of $N_2$-Flushing

• Applied Microscopy
• /
• v.33 no.1
• /
• pp.1-16
• /
• 2003

As is well known that N-nitroso-N-methylurethane (NNNMU) causes acute lung injury (ALI) in experimental animals. And ALI caused by NNNMU is very similar to ARDS in human being in its pathology and progress. In its context, we investigated the pathogenetic mechanism of ARDS associated with oxidative stress by neutrophils in Sprague-Dawley rat model of NNNMU-induced ALI. NNNMU had increased lung weight/body weight ratio (L/B ratio), lung myeloperoxidase (MPO) activity, protein content and number of neutrophils in bronchoalveolar fluid (BALF) compared with those of control rat (p<0.001, respectively). In contrast, the amount of pulmonary surfactant in BALF was decreased by NNNMU (p<0.001). Morphologically, light microscopic examination denoted pathological findings such as formation of hyaline membrane, infiltration of neutrophils and perivascular cuffing in the lungs of NNNMU-treated rats. In addition, ultrastructural changes such as the necrosis of endothelial cells, swelling and vacuolization of lamellar bodies of alveolar type II cells, and the degeneration of pulmonary surfactant were identified after treatment of NNNMU. Very interestingly, cerium chloride electron microscopic cytochemistry showed that NNNMU had increased the production of cerrous-peroxide granules in the lung, which signified the increased production of hydrogen peroxide in the lung. Collectively, we conclude that NNNMU causes acute lung leak by the mechanism of neutrophilic oxidative stress of the lung.

• Journal of Veterinary Clinics
• /
• v.19 no.2
• /
• pp.228-235
• /
• 2002

Mastitis is the most costly disease results in lost milk production, decreased milk quality, milk discard, early culling of cows, drug costs and labor costs in dairy cow. Until now, a antibiotic administration at the end of lactation, dry cow therapy has been known the most effective and widely used mastitis control method. However, dry cow therapy do not control a new infection in the late dry and prepartum period because dry cow products have only persistent activity in the early dry period. Therefore, this study was conducted to evaluate clinical effect of sustained released biodegradable cephalexin microsphere using PLGA in bovine mastitis control during dry period. PLGA has been approved as controlled drug release system because of non-toxic, non-tissue reactive and bioerodible characteristics. This study revealed that cephalexin microsphere had a spherical shape with characteristic porous structure on the surface. Also, in vitro drug release studies are clearly observed that the release rate of cephalexin from PLGA microsphere decrease during the first 21 days after initial burst and then increase again between 3 and 4 weeks showing pulsatile releasing pattern. On the other hand, as tried in field the new infection rate, cure rate and mean SCC after parturition in cephalexin microsphere infused group were significantly differenced as compared to the control group. Accordingly, a sustained release of cephalexin from a biodegradable microsphere could make dry cow therapy more efficiently by preventing a new infection and decreasing the number of existing infection of mammary gland during dry period.

• Journal of Plant Biotechnology
• /
• v.38 no.1
• /
• pp.22-29
• /
• 2011

Although reactive oxygen species (ROS) are inevitable by-products of many redox reactions in eukaryotic cells, they play a crucial role as signaling molecules in many cellular processes for development and defense response to abiotic stresses. The biphasic ROS production which was peaked twice in a first transient phase and a second massive phase was occurred after treatment of abiotic stress such as oxidative stress, high salinity. This biphasic generation of ROS was followed by the biphasic production of stress hormone, ethylene. The mechanism of interactions between ROS and ethylene biosynthesis is studied in tobacco (Nicotiana tabaccum L.) plants under the abiotic stresses. The stress-induced ethylene production was significantly inhibited in RbohD-AS and RbohF-AS, in which antisense expression of NADPH oxidase genes was performed. The accumulation of ROS, which was determined by DAB and DCFH-DA staining, was significantly decreased after abiotic stresses in transgenic plants. The suppression of signaling with ethylene and ROS induced more tolerance in response to abiotic stress. The transgenic plants were more tolerant in MS medium supplemented with salinity stress in contrast with wild-type. Stress-induced cell damage determined by DNA fragmentation was decreased at phase II in those transgenic plants. Therefore, the first burst of ROS is more responsible for making a role as a signaling molecule during stress-induced response. These results suggested that ethylene and ROS act in a positive feedback cycle that results in mutual enhancement of ethylene and ROS production during stress-induced cell death.

• Applied Chemistry for Engineering
• /
• v.10 no.3
• /
• pp.367-373
• /
• 1999

Increasing consumer demand for recycle of most paper products is challenging manufacturers to use lower value raw materials while maintaining high quality. This study was carried out to investigate the composition of old corrugated containers (OCC) and to manufacture printing and writing papers of over 85% (ISO) brightness by ECF and TCF bleaching from OCC. Fiber length of American old corrugated container (AOCC) was longer than that of Korean old corrugated container (KOCC) in fiber length. The former was composed of unbleached kraft pulp (UKP) of about 80 percentage, the latter about 20 percentage. OCC is feasible for manufacturing of pulps i.e., AOCC is for printing and writing papers and KOCC is for whiteboards, in the aspects of brightness and mechanical properties on the other hand, the cost of manufacturing upgraded papers by OCC is high because of bleaching chemicals. Neverthless, considering various aspects, especially environment, there are many advantages in recycling. In case of the treated AOCC pulp, over 85% (ISO) brightness can be achieved through TCF or ECF bleaching step, while the treated KOCC pulp did not allow high brightness through TCF bleaching. The tensile index of the bleached KOCC pulp was lower than that of the bleached AOCC pulp, but the burst and tear index of KOCC was higher than that of AOCC.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.7 no.2
• /
• pp.148-155
• /
• 2005

An accurate prediction of blooming date is crucial for many authorities to schedule and organize successful spring flower festivals in Korea. The Korea Meteorological Administration (KMA) has been using regression models combined with a subjective correction by forecasters to issue blooming date forecasts for major cities. Using mean monthly temperature data for February (observed) and March (predicted), they issue blooming date forecasts in late February to early March each year. The method has been proved accurate enough for the purpose of scheduling spring festivals in the relevant cities, but cannot be used in areas where no official climate and phenology data are available. We suggest a thermal time-based two-step phenological model for predicting the blooming dates of spring flowers, which can be applied to any geographic location regardless of data availability. The model consists of two sequential periods: the rest period described by chilling requirement and the forcing period described by heating requirement. It requires daily maximum and minimum temperature as an input and calculates daily chill units until a pre-determined chilling requirement for rest release. After the projected rest release date, it accumulates daily heat units (growing degree days) until a pre- determined heating requirement for flowering. Model parameters were derived from the observed bud-burst and flowering dates of cherry tree (Prunus serrulata var. spontanea) at KMA Seoul station along with daily temperature data for 1923-1950. The model was applied to the 1955-2004 daily temperature data to estimate the cherry blooming dates and the deviations from the observed dates were compared with those predicted by the KMA method. Our model performed better than the KMA method in predicting the cherry blooming dates during the last 50 years (MAE = 2.31 vs. 1.58, RMSE = 2.96 vs. 2.09), showing a strong feasibility of operational application.