• Archives of Plastic Surgery
• /
• v.36 no.3
• /
• pp.336-340
• /
• 2009

Purpose: The wound of a patient who has chronic venous insufficiency is easy to recur. Also they develop a complication even after the conservative therapy or skin graft. We have to diagnose the venous stasis ulcer correctly and remove the cause to improve the effectiveness of treatment. We operated endoscopic perforating vein ligation and splitt thickness skin graft on a patient with venous stasis ulceration on right leg. Methods: A 26 year old male patient who had a scalding burn on his right leg in July 2005 checked into our hospital in March 2008. Even though he got three operations - the split thickness skin graft - at different clinics, the wound did not heal. The size of the wound was 12 by $8cm^2$ and granulation with edema and fibrosis had been formed. We kept observation on many collateral vessels and perforating vein through venogram and doppler sonography and firmly get to know that the wound came with chronic venous insufficiency. After a debridement and an application of VAC$^{(R)}$ for two weeks, the condition of granulation got better. So we proceeded with the operation using subfascial endoscopic perforating surgery and split thickness skin graft. Results: Through the venogram after the operation, we found out that the collateral vessels had been reduced compared to the previous condition and the widened perforating vein disappeared. During a follow up of 6 months, the patient did not develop recurrent stasis ulcer and postoperative complications. Conclusion: Subfascial endoscopic perforator ligation is relatively simple technique with a low complication rate and recurrence rate. Split thickness skin graft with subfascial endoscopic perforator surgery can be valuable method for treating severe venous stasis ulcers.

• Journal of Conservation Science
• /
• v.33 no.6
• /
• pp.485-495
• /
• 2017

The purpose of this study is to evaluate the functionality and lightfastness of the natural pigments according to the type of Seokganju used as Dancheong. The commercially available red iron-oxide-based natural pigments that are called Seokganju and Daija manufactured by traditional methods in Korea and Japan were selected. The analysis of the constituent minerals and constituents of 8 kinds of collected Seokganju showed that most of them contained hematite. There are two types of Seokganju according to the $Fe_2O_3$ contents. The type of Seokganju can be characterized not only using the main component but also from the burn-out processing. The chromaticity results for Seokganju with a high $Fe_2O_3$ concentration indicate dark red or grayish brown, while those for Seokganju with a low $Fe_2O_3$ concentration indicate yellowish red or yellowish brown. Samples were prepared by mixing with a glue solution and functional properties were evaluated based on the opacity and spreadability. Coated samples were used in the lightfastness test. The spreadability and opacity of the pigments were measured differently depending on the main component. Most Seokganju samples a showed slight color change until $9,000kJ/m^2$ but rapid color changes were detected after $18,000kJ/m^2$. In particular, burnt Seokganju showed superior lightfastness.

• Journal of Animal Science and Technology
• /
• v.50 no.1
• /
• pp.19-26
• /
• 2008

Heritability and genetic correlation for growth traits in Duroc pig breed were estimated using Bayesian method via Gibbs sampling. The data set consisted of 3,526 performance records at National Institute of Animal Science. For estimating those parameters using Gibbs sampling, 5,000 cycles of ‘burn-in’ period were discarded among a total of 55,000 samples. Out of the remaining 50,000 samples, 5,000 estimates by each parameter were retained and used for analyses to avoid any correlation among adjacent samples. The growth traits considered in this study were average daily gain at 30kg(ADG1), average daily gain at 90kg(ADG2), backfat thickness(BF), days to 90kg(D90) and feed conversion ratio(FC). The estimated heritabilities and their standard deviation using Gibbs sampler were 0.43±0.04, 0.49±0.038, 0.31±0.040, 0.48±0.039 and 0.62±0.086, respectively. Genetic correlations were －0.02, －0.13, －0.55 and －0.15 between ADG1 with ADG2, BF, D90 and FC, respectively, 0.16, －0.73, －0.32 between ADG2 with BF, D90 and FC respectively, 0.01, －0.08 between BF with D90, FC, respectively, and 0.23 between D90 with FC.

• Applied Chemistry for Engineering
• /
• v.9 no.7
• /
• pp.1011-1017
• /
• 1998

$YBa_2Cu_3O_{6+x}(Y123)-Ag$ high-Tc superconducting wires were fabricated by plastic extrusion technique using pyrophoric synthetic and mechanical mixing powder with and without Ag addition(20 wt.%). This method involves powder preparation, plastic paste making, die extrusion, binder burn-out and the sintering process. In order to fabricate a good-quality superconducting body, it is required to use homogeneous and fine-size power as a starting materials. $Y_2O_3-BaCO_3-CuO$ precursor powders with/without Ag addition were prepared both by pyrophoric synthetic(PS) and mechanical mixing(MM) method of raw powders. The formation kinetics of the powder mixtures into Y123 phase was investigated at various temperatures and times in air atmosphere. The powder prepared by PS method was more easily converted into a Y123 phase than the MM powder. The fine size and good chemical homogeneity of the powder prepared by PS method is attributable to the fast formation into a Y123 phase. The critical current density($J_c$) of the Y123-Ag superconducting wires made by plastic extrusion method were in the range of $150A/cm^2{\sim}230A/cm^2$. depending on the charateristics of starting material powders. $J_c$ of the wire prepared by pyrophoric synthetic powder with 20 wt.% Ag addition was $230A/cm^2$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.37-43
• /
• 2017

This review investigates the basic principle of physical interactions and failure mechanisms introduced in the materials and inner parts of semiconducting components under electromagnetic pulses (EMPs). The transfer process of EMPs at the semiconducting component level can be explained based on three layer structures (air, dielectric, and conductor layers). The theoretically absorbed energy can be predicted by the complex reflection coefficient. The main failure mechanisms of semiconductor components are also described based on the Joule heating energy generated by the coupling between materials and the applied EMPs. Breakdown of the P-N junction, burnout of the circuit pattern in the semiconductor chip, and damage to connecting wires between the lead frame and semiconducting chips can result from dielectric heating and eddy current loss due to electric and magnetic fields. To summarize, the EMPs transferred to the semiconductor components interact with the chip material in a semiconductor, and dipolar polarization and ionic conduction happen at the same time. Destruction of the P-N junction can result from excessive reverse voltage. Further EMP research at the semiconducting component level is needed to improve the reliability and susceptibility of electric and electronic systems.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.9 no.2
• /
• pp.186-198
• /
• 2003

The purpose of this study was to analyze social support, job satisfaction and burnout level of Korean nurses who are working in Germany. The data were obtained from 71 nurses in terms of questionnaire which was distributed between October 2000. to January 2001. The analysis of the data was done by means of the SPSS program. The results of this study were as follows ; 1. The subjects had social supporters on the average of 8 to 9. The total social support score was 264.79. An analysis of the relationship between social support and general characteristics for the subjects was found to be statistically significant in the case of religion(t=2.783, p< .05 ) and work experience(F=2.594, p< .05). 2. The mean score of job satisfaction was the highest in interaction(3.71) followed by the relationship between nurses and doctors (3.56), and then followed by autonomy, professional position, pay, requirements, administration in descending order. So the total mean score 3.33 was based on a maximum score of 5. An analysis of the relationship between job satisfaction and general characteristics for the subjects was found to be statistically significant in the case of the thought of the value for the nurse job (F=4.977, p< .001). 3. The mean score of burnout level was 2.94 based on a maximum score of 7. Burnout level was the highest in the order of physical exhaustion, emotional exhaustion and mental exhaustion. An analysis of the relationship between burnout level and general characteristics for the subjects was found to be statistically significant in the case of planning period of employed nursing profession (F=4.113, p< .001), shift of work department (F=2.593, p< .05 ), thought of the value for the nurse job (F=3.789, p< .001). 4. The job satisfaction was found higher as the social support was higher(r= .278, p< .05). The burnout level was found lower as the social support was higher(r= .342, p< .01). The burnout level was found lower as the job satisfaction was higher(r= .478, p< .01). These results discussed on the above indicated that social support influenced on job satisfaction and burnout level, and that job satisfaction influenced on burnout level. To improve job satisfaction for the nurse, it is necessary that the role of social support as well as the method to increase it should be investigated correctly. The study to adjust as well as to prevent burnout level is absolutely needed.

• Fire Science and Engineering
• /
• v.31 no.2
• /
• pp.29-36
• /
• 2017

The design fire based on the heat release rate (HRR) of combustibles can significantly affect the assessment of fire safety in the performance-based design (PBD). In the present PBD, however, limited information in the foreign literature has been used without further verification due to the lack of fire information in domestic combustibles. The objective of this study is to provide information on the HRR and fire growth rate for various combustibles in residential and office spaces. To end this, the fire experiments were carried out with single and multiple combustibles. The peak HRR of combustibles used in the present study had a range of 36 kW~1,092 kW. The fire growth rates were also $0.003kW/s^2{\sim}0.0287kW/s^2$ and $0.003kW/s^2{\sim}0.0838kW/s^2$ for the residential and office spaces, respectively. In particular, a sofa had the highest fire risk in terms of the peak HRR and fire growth rate. Finally, a methodology for calculating the peak HRR in a space was proposed through correlation analysis between the peak HRR and exposed surface of various combustibles.

• Analytical Science and Technology
• /
• v.13 no.6
• /
• pp.751-758
• /
• 2000

A study was carried out on the dissolution of spent PWR fuels and performed on the fuels and the separation of iodide for the quantitative analysis using SIMFUEL which has chemical composition of a simulated spent PWR fuel (burn-up; 35,000 MWd/MTU and cooling time; 10 years). To dissolve the SIMFUEL effectively and to minimize the formation of volatile iodine through dissolution process, the optimum ratio of mixed acid ($HNO_3/HCl$ 80: 20 mol%) was established and ozone gas was purged. In the separation step of iodine with $CCl_4$, $NH_2OH{\cdot}HCl$ was used for reducing ${IO_3}^-$ to $I_2$.The optimum acidity of the dissolved solution and the added of $NH_2OH{\cdot}HCl$ were 2.5 M and more than $1.5{\times}10^{-3}mole$, respectively. The recovery of iodide by ion chromatography was $82.8{\pm}4.1%$ and the total yield was corrected by gamma spectrometery using $^{131}I$ as a tracer.

• Journal of Animal Science and Technology
• /
• v.50 no.4
• /
• pp.457-464
• /
• 2008

Heritability and genetic correlation for reproductive traits in Yorkshire pig breed were estimated using Bayesian method via Gibbs sampling. The data set consisted of 9,609 reproductive records at pig breeding farm in Korea. For estimating those parameters using Gibbs sampling, 5,000 cycles of ‘burn-in’ period were discarded among a total of 55,000 samples. Out of the remaining 50,000 samples, 5,000 estimates by each parameter were retained and used for analyses to avoid any correlation among adjacent samples. The reproductive trait considered in this study were total number of born piglets(TNB) and estimated by two different models. The estimated heritability and permanent environmental effect using Gibbs sampler were 0.12±0.020 and 10.9±1.63, respectively. Estimated genetic correlations considered parities as different traits were distributed from 0.99 to －0.13. Such results indicated that reproductive traits for sows should be considered as different traits.

• Journal of Biomedical Engineering Research
• /
• v.25 no.5
• /
• pp.383-389
• /
• 2004

A commercially pure Ti(CP-Ti) and Ti-25wt％Pd alloy for dental applications were cast into a phosphate-bonded Al$_2$ $O_3$/ $SiO_2$ investment mold and the surface of the casting specimens were investigated by means of SEM/EDS, XRD and XPS. The addition of 25wt％Pd in CP-Ti showed a moderate mold reaction owing to the considerable lowering of melting point. XRD analysis of the investment after burn-out treatment revealed that it consisted essentially of $SiO_2$, Al$_2$ $O_3$, P$_2$O$\_$5/, Mg$_3$(P $O_4$)$_2$, AlP $O_4$, Mg$_2$ $SiO_4$, MgAl$_2$ $O_4$ The mold reaction products were Ti$\_$5/Si$_3$ and Ti $O_2$ in case of CP-Ti casting and Ti $O_2$ and SiO$\_$x/ in case of Ti-25wt％ Pd casting.